CRW60 [WALL]
60 Watt DC/DC Power Converters;型号: | CRW60 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 60 Watt DC/DC Power Converters |
文件: | 总5页 (文件大小:125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CRW60 SERIES
Rev A
Wall Industries, Inc.
60 Watt DC/DC Power Converters
FEATURES
• Input Under Voltage Protection
• 60 Watts Maximum Output Power
• High Efficiency up to 92%
• 1600VDC I/O Isolation
• Remote ON/OFF Control
• Short Circuit, Over Voltage, Over Load, & Over Temp. Protection
• Wide Operating Temperature Range: -40°C to +85°C
• CE Mark Meets 2006/95/EC, 2011/95/EC, & 2004/108/EC
• Compliant to RoHS EU Directive 2011/65/EU
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• Optional Heatsink Available (Suffix “HS”)
• 2:1 Wide Input Voltage Ranges
• Six-Sided Continuous Shielding
• Low Stand-by Power Consumption
• No Minimum Load Required
• Single and Dual Outputs
Size:
2.00 x 1.00 x 0.40 inches
(50.8 x 25.4 x 10.2 mm)
DESCRIPTION
The CRW60 series of DC/DC power converters provides 60 Watts of output power in an industry standard 2.00” x
1.00” x 0.40” package and footprint. This series has single and dual output models with 4:1 ultra wide input voltage
ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 92%, 1600VDC I/O isolation, six-sided
shielding, and remote ON/OFF control. These converters are also protected against short circuit, over voltage, over
load, and over temperature conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and
IEC60950-1 safety approvals. This series is best suited for use in wireless networks, telecom/datacom, industry
control systems, semiconductor equipment, and distributed power architectures.
Applications:
• Wireless Networks
• Telecom/Datacom
• Industry Control Systems
• Distributed Power Architectures
•
Semiconductor Equipment
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current
Output
Voltage
Output No Load
Ripple & Noise Input Current
Output
Power
Maximum
Capacitive Load
Model Number Input Voltage Range
Efficiency
Min Load
Max Load
12A
12A
5A
CRW24S33-60
CRW24S05-60
CRW24S12-60
CRW24S15-60
CRW24S24-60
CRW48S33-60
CRW48S05-60
CRW48S12-60
CRW48S15-60
CRW48S24-60
3.3 VDC
5 VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
75mVp-p
75mVp-p
100mVp-p
100mVp-p
150mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
150mVp-p
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
39.6W
60W
60W
60W
60W
39.6W
60W
60W
60W
60W
90%
92%
92%
92%
92%
90%
92%
92%
92%
92%
32,000µF
30,000µF
5850µF
3900µF
2000µF
32,000µF
30,000µF
5850µF
3900µF
2000µF
24 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
(9 - 36 VDC)
4A
2.5A
12A
12A
5A
48 VDC
12 VDC
15 VDC
24 VDC
(18 - 75 VDC)
4A
2.5A
DUAL OUTPUT MODELS
Output Current
Output
Voltage
Output No Load
Ripple & Noise Input Current
Output
Power
Maximum
Capacitive Load
Model Number Input Voltage Range
Efficiency
Min Load
0mA
Max Load
2.5A
CRW24D12-60
24 VDC
CRW24D15-60
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
100mVp-p
100mVp-p
150mVp-p
100mVp-p
100mVp-p
150mVp-p
10mA
10mA
10mA
10mA
10mA
10mA
60W
60W
60W
60W
60W
60W
91%
91%
91%
91%
91%
91%
3900µF
2400µF
1000µF
3900µF
2400µF
1000µF
0mA
2A
(9 - 36 VDC)
CRW24D24-60
0mA
1.25A
2.5A
CRW48D12-60
48 VDC
CRW48D15-60
0mA
0mA
2A
(18 - 75 VDC)
CRW48D24-60
NOTES
0mA
1.25A
1. The CRW60 series can only meet EMI Class A or Class B with external components added. Please contact factory for more information.
2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
- For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS
(SMDJ58A, 58V, 3000 Watt peak pulse power) diode in parallel.
- For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS
(SMDJ120A, 120V, 3000 Watt peak pulse power) diode connected in parallel.
3. Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative logic remote ON/OFF add the
suffix “R” to the model number (Ex: CRW48S12-60R).
4. Optional heatsink is available. Please call factory for ordering details.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
06/13/2013
Page 1 of 5
CRW60 SERIES
Rev A
Wall Industries, Inc.
60 Watt DC/DC Power Converters
SPECIFICATIONS: CRW60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24VDC nominal input models
9
24
48
36
75
9
Input Voltage Range
Start-Up Voltage
VDC
VDC
VDC
VDC
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
No Load
18
18
8
Shutdown Voltage
16
50
Input Surge Voltage (1sec, max.)
100
Input Current
See Table
Input Filter
Pi type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
See Table
-1.0
-0.2
-0.5
-1.0
-5.0
-10
+1.0
%
%
Low line to high line at full load
No load to full load
+0.2
+0.5
+1.0
+5.0
+10
+20
Single Output Models
Dual Output Models
Load Regulation
%
%
%
Cross Regulation (Dual Output Models) Asymmetrical load 25% / 100% FL
3.3V, 5V, & 12V Output Models
15V & 24V Outputs Models
Voltage Adjustability
Single Output Models
-10
Output Power
See Table
Output Current
See Table
Minimum Load
0
%
Maximum Capacitive Load
Minimum input and constant resistive load
Measured with a 10µF/25V X7R MLCC
Measured with a 10µF/25V X7R MLCC
Measured with a 4.7µF/50V X7R MLCC
25% load step change
See Table
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
75
100
125
200
Ripple & Noise (20MHz BW)
100
150
250
60
mVp-p
Transient Response Recovery Time
Start-Up Time
µs
ms
Power Up
Constant resistive load
Remote On/Off
60
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Load Protection
Continuous, automatic recovery
% of rated Iout; hiccup mode
Zener diode clamp
150
3.9
6.2
15
%
3.3V Output Models
5V Output Models
12V Output Models
15V Output Models
24 V Output Models
Over Voltage Protection
VDC
°C
20
30
Over Temperature Protection
GENERAL SPECIFICATIONS
Efficiency
+115
Nominal input voltage and full load
See Table
Switching Frequency
225
1600
1600
1
250
275
kHz
Input to Output
Isolation Voltage
1 minute
500VDC
VDC
Input (Output) to Case
Isolation Resistance
Isolation Capacitance
GΩ
pF
2200
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
06/13/2013
Page 2 of 5
CRW60 SERIES
Rev A
Wall Industries, Inc.
60 Watt DC/DC Power Converters
SPECIFICATIONS: CRW60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
REMOTE ON/OFF (See Note 3)
TEST CONDITIONS
Min
Typ
Max
Unit
DC/DC ON
Open or 3V ~ 12 VDC
Short or 0 ~ 1.2 VDC
Short or 0 ~ 1.2 VDC
Open or 3V ~ 12 VDC
+0.5
Positive Logic (standard)
Negative Logic (optional)
Referenced to –Input pin
Referenced to –Input pin
DC/DC OFF
DC/DC ON
DC/DC OFF
Input Current of Remote Control Pin
Remote OFF State Input Current
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature
Nominal Vin
Nominal Vin
-0.5
mA
mA
3
See derating curves
-40
-55
+85
+105
°C
°C
°C
+125
Without Heatsink
With Heatsink
10.8
Thermal Impedance (See Note 4)
Natural Convection (20LFM)
°C/W
% RH
10.3
Relative Humidity
Thermal Shock
Vibration
5
95
MIL-STD-810F
MIL-STD-810F
BELLCORE TR-NWT-000332 Case 1: 50% Stress, Ta=40°C
2,661,000
98,650
MTBF
hours
MIL-HDBK-217F Ta=25°C, full load (G/B, controlled environment)
PHYSICAL SPECIFICATIONS
Weight
1.16oz (33g)
Dimensions (L x W x H)
Case Material
2.00x1.00x0.40 inch (50.8x25.4x10.2 mm)
copper
FR4 PCB
Base Material
Potting Material
Silicon (UL94-V0)
Six-sided
Shielding
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMI (See Note 1)
IEC60950-1, UL60950-1, EN60950-1
Class A
EN55022
Air 8kV
EN61000-4-2
ESD
Perf. Criteria A
Contact 6kV
Radiated Immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
20 V/m
2kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Fast Transient (See Note 2)
Surge (See Note 2)
2kV
Conducted Immunity
10 Vrms
DERATING CURVES
CRW48S12-60 Derating Curve
CRW48S12-60 Derating Curve with Heatsink
120
100
80
60
40
20
0
120
100
80
60
40
20
0
Natural Convection
100LFM
200LFM
300LFM
400LFM
500LFM
Natural Convection
100LFM
200LFM
300LFM
400LFM
500LFM
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
80
100
120
Ambient Temperature (°C)
Ambient Temperature (°C)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
06/13/2013
Page 3 of 5
CRW60 SERIES
Rev A
Wall Industries, Inc.
60 Watt DC/DC Power Converters
EFFICIENCY CURVES
CRW48S12-60 Efficiency vs Input Voltage
CRW48S12-60 Efficiency vs Output Load
100
100
95
90
95
90
85
80
85
80
Vin=36V
Vin=48V
Vin=75V
75
70
75
70
10
20
30
40
50
60
70
80
90
100
18
24
30
36
42
48
54
60
66
72
75
% of Full Load
Input Voltage (VDC)
MECHANICAL DRAWING
Unit: inches (mm)
NOTES
1. Tolerance: X.XX 0.02 (X.X 0.5)
X.XXX 0.01 (X.XX 0.25)
2. Pin Pitch Tolerance: 0.01 ( 0.25)
3. Pin Dimension Tolerance: 0.004 ( 0.1)
1.00 (25.4)
0.800 (20.3)
0.200
0.400 (10.16) (5.08)
0.40 (10.2)
DIA.
0.04 (1.0)
3
2
1
PIN CONNECTIONS
EXTERNAL OUTPUT TRIMMING
PIN
1
SINGLE
+INPUT
-INPUT
CTRL
DUAL
Output can be externally trimmed
by using the method shown below.
+INPUT
-INPUT
2
TRIM UP
TRIM DOWN
6
3
CTRL
6
4
+OUTPUT
-OUTPUT
TRIM
+OUTPUT
COMMON
-OUTPUT
RU
RD
5
5
4
6
6
5
4
0.22
(5.6)
0.300
(7.62)
0.100 (2.54)
0.700 (17.78)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
06/13/2013
Page 4 of 5
CRW60 SERIES
Rev A
Wall Industries, Inc.
60 Watt DC/DC Power Converters
MODEL NUMBER SETUP
CRW
Series Name
48
Input Voltage
S
Output Quantity
12
Ouptut Voltage
-
60
Output Power
R
Remote ON/OFF
H
Heatsink
24: 9-36 VDC
48: 18-75 VDC
S: Single Output
33: 3.3 VDC
05: 5 VDC
12: 12 VDC
15: 15 VDC
24: 24 VDC
60: 60 Watts
Blank: Positive Logic
R: Negative Logic
Blank: No Heatsink
H: Heatsink
HC: Heatsink with clamp
D: Dual Output
12: 12 VDC
15: 15 VDC
24: 24 VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
ꢀ(603)778-2300
ꢀ(888)597-9255
ꢀ(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
06/13/2013
Page 5 of 5
相关型号:
CRX14
Low Cost 13.56MHz / IC Short Range Contactless Coupler Chip with anti-collision, CRC management and anti-clone function
STMICROELECTR
CRX14-MQ
Low Cost ISO14443 type-B Contactless Coupler Chip with Anti-Collision, CRC Management and Anti-Clone Function
STMICROELECTR
CRX14-MQ/XX
Low Cost 13.56MHz / IC Short Range Contactless Coupler Chip with anti-collision, CRC management and anti-clone function
STMICROELECTR
CRX14-MQP
Low Cost ISO14443 type-B Contactless Coupler Chip with Anti-Collision, CRC Management and Anti-Clone Function
STMICROELECTR
CRX14_05
Low Cost ISO14443 type-B Contactless Coupler Chip with Anti-Collision, CRC Management and Anti-Clone Function
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明