CR12S05-60 [WALL]
60 Watt DC/DC Power Converters;型号: | CR12S05-60 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 60 Watt DC/DC Power Converters |
文件: | 总5页 (文件大小:532K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CR60 SERIES
60 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
FEATURES
Input Under Voltage Protection
60 Watts Maximum Output Power
High Efficiency up to 92%
1600VDC I/O Isolation
Remote ON/OFF Control
Short Circuit, Over Voltage, Over Load, & Over Temp. Protection
Wide Operating Temperature Range: -40°C to +85°C
CE Mark Meets 2006/95/EC, 2011/95/EC, & 2004/108/EC
Compliant to RoHS EU Directive 2011/65/EU
UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
Optional Heatsink Available (Suffix “HS”)
2:1 Wide Input Voltage Ranges
Six-Sided Continuous Shielding
Low Stand-by Power Consumption
No Minimum Load Required
Single and Dual Outputs
Size:
2.00 x 1.00 x 0.40 inches
(50.8 x 25.4 x 10.2 mm)
DESCRIPTION
The CR60 series of DC/DC power converters provides 60 Watts of output power in an industry standard 2.00” x 1.00”
x 0.40” package and footprint. This series has single and dual output models with 2:1 wide input voltage ranges of 9-
18VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to 92%, 1600VDC I/O isolation, six-sided
shielding, and remote ON/OFF control. These converters are also protected against short circuit, over voltage, over
load, and over temperature conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and
IEC60950-1 safety approvals. This series is best suited for use in wireless networks, telecom/datacom, industry
control systems, semiconductor equipment, and distributed power architectures.
Applications:
Wireless Networks
Telecom/Datacom
Industry Control Systems
Distributed Power Architectures
Semiconductor Equipment
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
Output Current
Min Load
Output
No Load
Output
Power
39.6W
60W
60W
60W
60W
39.6W
60W
60W
60W
60W
39.6W
60W
60W
60W
Maximum
Capacitive Load
32000μF
30000μF
5850μF
Model Number Input Voltage Range
CR12S33-60
Efficiency
Ripple & Noise Input Current
Max Load
12A
12A
5A
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
75mVp-p
75mVp-p
100mVp-p
100mVp-p
150mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
150mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
150mVp-p
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
89%
90.5%
90.5%
91.5%
91.5%
89%
92%
92%
92%
92%
CR12S05-60
CR12S12-60
CR12S15-60
12 VDC
(9 - 18 VDC)
4A
3900μF
2000μF
32000μF
30000μF
5850μF
3900μF
2000μF
32000μF
30000μF
5850μF
CR12S24-60
CR24S33-60
2.5A
12A
12A
5A
CR24S05-60
CR24S12-60
CR24S15-60
24 VDC
(18 - 36 VDC)
4A
CR24S24-60
CR48S33-60
2.5A
12A
12A
5A
4A
2.5A
89%
92%
92%
92%
CR48S05-60
CR48S12-60
CR48S15-60
48 VDC
(36 - 75 VDC)
3900μF
2000μF
CR48S24-60
60W
92%
DUAL OUTPUT MODELS
Output
Voltage
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
Output Current
Output
No Load
Output
Power
60W
60W
60W
60W
60W
60W
60W
60W
60W
Maximum
Capacitive Load
3900μF
Model Number Input Voltage Range
Efficiency
Ripple & Noise Input Current
Min Load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
Max Load
2.5A
2A
CR12D12-60
12 VDC
100mVp-p
100mVp-p
150mVp-p
100mVp-p
100mVp-p
150mVp-p
100mVp-p
100mVp-p
150mVp-p
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
10mA
90%
90%
90%
90%
90%
90%
91%
91%
91%
CR12D15-60
CR12D24-60
2400μF
1000μF
3900μF
2400μF
1000μF
3900μF
2400μF
1000μF
(9 - 18 VDC)
1.25A
2.5A
2A
CR24D12-60
24 VDC
CR24D15-60
CR24D24-60
(18 - 36 VDC)
1.25A
2.5A
2A
CR48D12-60
48 VDC
CR48D15-60
(36 - 75 VDC)
CR48D24-60
1.25A
NOTES
1. The CR60 series can only meet EMI Class A or Class B with external components added. Please contact factory for more information.
2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. For 12VDC & 24VDC nominal input models we recommend
connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V) and a TVS (SMDJ58A, 58V, 3000 Watt peak pulse power) diode in parallel.
For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V) and a TVS (SMDJ120A,
120V, 3000 Watt peak pulse power) diode connected in parallel.
3. Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative logic remote ON/OFF add the
suffix “R” to the model number (Ex: CR48S12-60R).
4. Optional heatsink is available. Please call factory for ordering details.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
03/27/2013
Page 1 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
CR60 SERIES
60 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
SPECIFICATIONS: CR60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
12VDC nominal input models
9
18
36
12
24
48
18
36
75
9
18
36
Input Voltage Range
Start-Up Voltage
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
No Load
VDC
VDC
VDC
VDC
8
16
32
Shutdown Voltage
25
50
100
Input Surge Voltage (1sec, max.)
Input Current
See Table
Input Filter
Pi type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
See Table
-1.0
+1.0
%
%
Low line to high line at full load
No load to full load
-0.2
-0.5
-1.0
-5.0
-10
+0.2
+0.5
+1.0
+5.0
+10
+20
Single Output Models
Dual Output Models
Load Regulation
%
%
%
Cross Regulation (Dual Output Models) Asymmetrical load 25% / 100% FL
3.3V, 5V, & 12V Output Models
15V & 24V Outputs Models
Voltage Adjustability
Single Output Models
-10
Output Power
See Table
Output Current
See Table
Minimum Load
0
%
Maximum Capacitive Load
Minimum input and constant resistive load
Measured with a 10μF/25V X7R MLCC
Measured with a 10μF/25V X7R MLCC
Measured with a 4.7μF/50V X7R MLCC
25% load step change
See Table
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
75
100
125
200
Ripple & Noise (20MHz BW)
100
150
250
60
mVp-p
Transient Response Recovery Time
Start-Up Time
μs
ms
Power Up
Constant resistive load
Remote On/Off
60
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Load Protection
Continuous, automatic recovery
% of rated Iout; hiccup mode
Zener diode clamp
150
3.9
%
3.3V Output Models
5V Output Models
12V Output Models
15V Output Models
24 V Output Models
6.2
Over Voltage Protection
15
20
30
+115
VDC
°C
Over Temperature Protection
GENERAL SPECIFICATIONS
Efficiency
Nominal input voltage and full load
See Table
Switching Frequency
225
1600
1600
1600
1
250
275
kHz
VDC
VDC
VDC
GΩ
Input to Output
Input to Case
Output to Case
Isolation Voltage
1 minute
500VDC
Isolation Resistance
Isolation Capacitance
2200
pF
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
03/27/2013
Page 2 of 5
CR60 SERIES
60 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
SPECIFICATIONS: CR60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF (See Note 3)
DC/DC ON
Open or 3V ~ 12 VDC
Short or 0 ~ 1.2 VDC
Short or 0 ~ 1.2 VDC
Open or 3V ~ 12 VDC
+0.5
Positive Logic (standard)
Referenced to –Input pin
Referenced to –Input pin
DC/DC OFF
DC/DC ON
DC/DC OFF
Negative Logic (optional)
Input Current of Remote Control Pin
Remote OFF State Input Current
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature
Nominal Vin
Nominal Vin
-0.5
mA
mA
3
See derating curves
-40
-55
+85
+105
+125
°C
°C
°C
Without Heatsink
With Heatsink
10.8
10.3
Thermal Impedance (See Note 4)
Natural Convection (20LFM)
°C/W
% RH
Relative Humidity
Thermal Shock
Vibration
5
95
MIL-STD-810F
MIL-STD-810F
2,661,000 hours
98,650 hours
BELLCORE TR-NWT-000332 Case 1: 50% Stress, Ta=40°C
MIL-HDBK-217F Ta=25°C, full load (G/B, controlled environment)
MTBF
PHYSICAL SPECIFICATIONS
Weight
1.16oz (33g)
Dimensions (L x W x H)
Case Material
Base Material
2.00x1.00x0.40 inch (50.8x25.4x10.2 mm)
copper
FR4 PCB
Potting Material
Shielding
Silicon (UL94-V0)
Six-sided
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMI (See Note 1)
IEC60950-1, UL60950-1, EN60950-1
Class A
EN55022
Air 8kV
Contact 6kV
ESD
EN61000-4-2
Perf. Criteria A
Radiated Immunity
Fast Transient (See Note 2)
Surge (See Note 2)
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
20 V/m
2kV
2kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Conducted Immunity
10 Vrms
DERATING CURVES
CR48S12-60 Derating Curve
CR48S12-60 Derating Curve with Heatsink
120
100
80
60
40
20
0
120
100
80
60
40
20
0
Natural Convection
100LFM
Natural Convection
100LFM
200LFM
200LFM
300LFM
300LFM
400LFM
400LFM
500LFM
500LFM
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
80
100
120
Ambient Temperature (°C)
Ambient Temperature (°C)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
03/27/2013
Page 3 of 5
CR60 SERIES
60 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
EFFICIENCY CURVES
CR48S12-60 Efficiency vs Input Voltage
CR48S12-60 Efficiency vs Output Load
100
100
95
90
95
90
85
80
85
80
Vin=36V
Vin=48V
Vin=75V
75
70
75
70
36
40
44
48
52
56
60
64
68
72
75
10
20
30
40
50
60
70
80
90
100
Input Voltage (VDC)
% of Full Load
MECHANICAL DRAWING
Unit: inches (mm)
NOTES
1. Tolerance: X.XX 0.02 (X.X 0.5)
X.XXX 0.01 (X.XX 0.25)
2. Pin Pitch Tolerance: 0.01 ( 0.25)
3. Pin Dimension Tolerance: 0.004 ( 0.1)
1.00 (25.4)
0.800 (20.3)
0.200
0.400 (10.16) (5.08)
0.40 (10.2)
DIA.
0.04 (1.0)
3
2
1
PIN CONNECTIONS
EXTERNAL OUTPUT TRIMMING
PIN
SINGLE
+INPUT
-INPUT
CTRL
DUAL
Output can be externally trimmed
by using the method shown below.
1
2
3
4
5
6
+INPUT
-INPUT
TRIM UP
6
TRIM DOWN
6
CTRL
+OUTPUT
-OUTPUT
TRIM
+OUTPUT
COMMON
-OUTPUT
RU
RD
5
4
6
5
4
0.22
(5.6)
0.300
(7.62)
0.100 (2.54)
0.700 (17.78)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
03/27/2013
Page 4 of 5
CR60 SERIES
60 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
MODEL NUMBER SETUP
CR
48
S
12
-
60
R
H
Series Name
Input Voltage
Output Quantity
Ouptut Voltage
Output Power
Remote ON/OFF
Heatsink
12: 9-18 VDC
24: 18-36 VDC
48: 36-75 VDC
S: Single Output
33: 3.3 VDC
05: 5 VDC
12: 12 VDC
15: 15 VDC
24: 24 VDC
60: 60 Watts
Blank: Positive Logic
R: Negative Logic
Blank: No Heatsink
H: Heatsink
HC: Heatsink with clamp
D: Dual Output
12: 12 VDC
15: 15 VDC
24: 24 VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
(603)778-2300
(888)597-9255
(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
03/27/2013
Page 5 of 5
相关型号:
©2020 ICPDF网 联系我们和版权申明