VPT30-2851215TW [VPT]
HIGH RELIABILITY COTS DC-DC CONVERTERS;型号: | VPT30-2851215TW |
厂家: | VPT, Inc. |
描述: | HIGH RELIABILITY COTS DC-DC CONVERTERS DC-DC转换器 |
文件: | 总10页 (文件大小:1114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VPT30-2800T SERIES
HIGH RELIABILITY COTS DC-DC CONVERTERS
Models Available
Input: 9 V to 80 V continuous, 100 V transient
30 W, tripleoutputs of 3.3 V, 5 V, 12 V, 15 V
-55 °C to 100 °C Operation
1.0 DESCRIPTION
1.1 FEATURES
The VPT30 series of isolated COTS DC-DC converters is a cost
effective solution for many demandinghigh reliabilityapplications.
A wide input voltage range accommodates nominal 28V inputs
including avionics, mobile, ground systems, and other applications.
Low input and output ripple, fixed operating frequency, and
companion EMI filters simplifysystem design and compliance. A
proven design heritage, no optoisolators and a rugged all metal or
optional epoxy encapsulated package ensure long term reliability.
High Reliability atLow Cost
30 Watts Output Power
Three IndependentFully Isolated Outputs
Wide InputVoltage Range: 9 to 80 Volts per MIL-STD-704 and
MIL-STD-1275
High Input Transient Voltage:100 Volts for 1 sec per
MIL-STD-1275
Each Output can be configured as a Positive orNegative Output
Zero Cross Regulation
The VPT30 series is intended for harsh environments including
severe vibration, shock and temperature cycling. Testing is to
JESD22, MIL-STD-810, and MIL-STD-883.
No Minimum Load Requirement
Input Undervoltage Lockout
Fixed Frequency
Output Soft Start
Short Circuit Protection
These converters are designed and manufactured in a facility
certified to ISO9001, J-STD-001 and
IPC-A-610.
Magnetic Feedback, no Optoisolators
Wide Temperature Range, -55 °C to 100 °C
Internally Conformal Coated
Standard Six Sided Non-HermeticRugged Metal Package
Multiple standard output voltage combinations
Optional Six Sided Rugged Epoxy Encapsulated
V-SHIELD® Package with Integral Metalized EMI shield that is
fully compatible with aqueous cleaningprocesses
This product may incorporate one or more of the following U.S.
patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
1.2 COMPLIANCE
MIL-STD-1275
MIL-STD-704
Meets MIL-STD-461 C-F when used with an appropriate VPT EMI
filter
1.3 PACKAGING
Low-profile: 1.885” x 1.325” x 0.400”
Optional Rugged Epoxy Encapsulated V-SHIELD® Package
Max weight: 50 g
1.4 SIMILAR PRODUCTS AND ACCESSORIES
DVTR 30 W triple output DC-DC Converter
VHR30 30 W triple output COTS DC-DC Converter
EMI filters, Thermal Pads, Front-End Modules and Accessories
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
1
VPT30-2800T SERIES DATASHEET
2.0 DESCRIPTION
2.1 BLOCK DIAGRAM
2.2 CONNECTION DIAGRAM
(Shown with optional VPTF3-28 EMIfilter, recommended for inputvoltages >13V,and optional negative outputconfiguration.)
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
2
VPT30-2800T SERIES DATASHEET
2.2 CONNECTION DIAGRAMS (CONTINUED)
(Shown with optional VPTF10-28 EMIfilter,recommended for inputvoltages < 13V,and optional stacked outputconfiguration.)
InhibitCircuit(Shownwith optionalcapacitor for turn-on delay)
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
3
VPT30-2800T SERIES DATASHEET
3.0 SPECIFICATIONS
3.1 ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings
InputVoltage (Continuous):
InputVoltage (Transient,1 sec):
80 V
100 V
Operating Temperature(Full Load):
Storage Temperature:
Lead Solder Temperature (10 seconds):
-55 °C to 100 °C
-55° C to 125 °C
300 °C
3.2 PERFORMANCE SPECIFICATIONS
Tcase = -55 °C to 100 °C, Vin = +28 V ± 5%, Full Load, Unless Otherwise Specified
VPT30-2800T
Parameter
INPUT
Conditions
Min
Typ
Max
Units
4
Voltage
9
-
-
-
28
-
1
80
V
V
mA
mA
Continuous
3
100
5
130
Transient,1 sec
INH < 1.5 V
No Load
Current
90
5
20 Hz to 10 MHz
Turn On
-
30
-
-
90
11
8.9
mA
V
V
Ripple Current
Undervoltage Lockout
9.8
8
3
Turn Off
OUTPUT STATIC
2
0
-
-
2
30
5
W
W
Power
Load FaultPower Dissipation
ShortCircuit
FUNCTION
3
OutputInhibited
OutputEnabled
0
9
-
1.5
13
V
V
InhibitPin Input
3
11
InhibitPin Open CircuitVoltage
GENERAL
5
77
82
-
%
Efficiency
Switching Frequency
Input
Output
500 V DC,Tcase =25 °C
100 V DC,Tcase =25 °C
400
325
100
20
500
400
-
-
-
550
475
-
-
50
kHz
kHz
MΩ
MΩ
g
Isolation Input/Output / Case
Isolation Output/Output
Weight
-
MTBF (MIL-HDBK-217F)
GM @ Tcase =55 ºC
672
kHr
3.3 V Output
5 V Output
Parameter
OUTPUT STATIC
Voltage
Conditions
Min
Typ
Max
Min
Typ
Max
Units
Tcase =25 °C
Tcase =-55 °C to 100 °C
3.25
3.21
0
3.3
3.3
-
3.35
3.38
10
4.92
4.87
0
5
5
-
5.08
5.13
15
V
V
W
2
Power
2
0
-
-
-
40
2
3
100
20
0
-
-
-
40
2
3
100
20
A
Current
Ripple Voltage
20 Hz to 10 MHz
Vin = 9 V to 80 V
No Load to Full Load
mVpp
mV
mV
5
Line Regulation
Load Regulation
-
3
30
-
3
30
OUTPUT DYNAMIC
Load Step, Halfto Full Load
OutputTransient
-
-
140
120
280
240
-
-
100
90
200
180
mVpk
µs
1
Recovery
3, 5
OutputTransient
-
-
50
50
100
100
-
-
60
50
120
100
mVpk
µs
Line Step , Vin = 16 V to 40 V
1
Recovery
5
Delay
Overshoot
-
-
14
0
20
15
-
-
14
0
20
25
ms
mVpk
Turn On , Vin = 0 to 28 V
GENERAL
3
-
-
1000
-
-
1000
µF
Capacitive Load
1.
2.
3.
4.
5.
Time for outputvoltage to settle to within 1% ofits nominal value
Derate linearlyto 0 at 110 °C
Verified by qualification testing
Operation down to 9 Vis possible after the inputvoltage is taken above 11 Vto startthe module
Tested with a balanced full load of10 Wper each output
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
4
VPT30-2800T SERIES DATASHEET
3.2 PERFORMANCE SPECIFICATIONS (CONTINUED)
Tcase = -55 °C to 100 °C, Vin = +28 V ± 5%, Full Load, Unless Otherwise Specified
12 V Output
15 V Output
Parameter
Conditions
Min
Typ
Max
Min
Typ
Max
Units
OUTPUT STATIC
Voltage
Tcase =25 °C
Tcase = -55 °C to 100 °C
11.82
11.7
12
12
12.18
12.3
14.77
14.62
15
15
15.23
15.38
V
V
2
0
-
15
0
-
15
W
Power
2
0
-
-
-
40
2
1.25
100
20
0
-
-
-
40
2
1
100
20
A
Current
Ripple Voltage
20 Hz to 10 MHz
Vin = 9 V to 80 V
No Load to Full Load
mVpp
mV
mV
5
Line Regulation
Load Regulation
-
3
30
-
3
30
OUTPUT DYNAMIC
Load Step, Halfto Full Load
OutputTransient
-
-
120
0
240
100
-
-
110
0
220
100
mVpk
µs
1
Recovery
3, 5
OutputTransient
-
-
150
50
300
100
-
-
180
50
360
100
mVpk
µs
Line Step , Vin = 16 V to 40 V
1
Recovery
5
Delay
Overshoot
-
-
14
0
20
50
-
-
14
0
20
50
ms
mVpk
Turn On , Vin = 0 to 28 V
GENERAL
3
-
-
500
-
-
500
µF
Capacitive Load
1.
2.
3.
4.
5.
Time for outputvoltage to settle to within 1% ofits nominal value
Derate linearlyto 0 at 110 °C
Verified by qualification testing
Operation down to 9 Vis possible after the inputvoltage is taken above 11 Vto startthe module
Tested with a balanced full load of10 Wper each output
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
5
VPT30-2800T SERIES DATASHEET
4.0 PERFORMANCE CURVES
4.1 EFFICIENCY PERFORMANCE CURVES
Tcase = 25 °C, Full Load, Unless Otherwise Specified
4.1.1 VPT30-283R31212T Efficiency (%) vs. Output Power (W)
4.1.2 VPT30-2851515T Efficiency (%) vs. Output Power (W)
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
6
VPT30-2800T SERIES DATASHEET
5.0 MECHANICAL OUTLINES AND PINOUT
Standard Metal Package:
1.
2.
3.
4.
Case temperature is measuredon the center ofthe baseplate surface.
Materials:Baseplate (Aluminum,conductive conversion coating);Cover (Nickel Plated);Pins (Copper,gold over nickel plating)
Mounting holes are notthreaded.Recommended fastener is 4-40
This Package is nothermetic.VPToffers a wide range ofhermetic products.Please contactVPTfor details ifhermetic products are required.
Pin Function
Pin Function
1
2
3
4
5
INCOM
INHIBIT
CASE
6
OUTRET1
7
+VOUT2
8
OUTRET2
+VOUT3
28VIN
+VOUT1
9
10
OUTRET3
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
7
VPT30-2800T SERIES DATASHEET
5.0 MECHANICAL OUTLINES AND PINOUT (CONTINUED)
Optional Epoxy Encapsulated Package:
5.
6.
7.
8.
Case temperature is measuredon the center ofthe baseplate surface.
Materials:Baseplate (Aluminum,conductive conversion coating);Cover (Nickel Plated);Pins (Copper,gold over nickel plating)
Mounting holes are notthreaded.Recommended fastener is 4-40
This Package is nothermetic.VPToffers a wide range ofhermetic products.Please contactVPTfor details ifhermetic products are required.
Pin Function
Pin Function
1
2
3
4
5
INCOM
INHIBIT
CASE
6
OUTRET1
7
+VOUT2
8
OUTRET2
+VOUT3
28VIN
+VOUT1
9
10
OUTRET3
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
8
VPT30-2800T SERIES DATASHEET
6.0 PACKAGE PIN DESCRIPTION
Pin
Function
Description
1
2
INCOM
InputReturn Connection.
This is an open collector input.Logic Low =Disabled Output.Connectthe inhibitpin to inputcommon to disable the output.
Unconnected,opencollector or open drain =Enabled Output.
INHIBIT
3
4
CASE
Case Connection.
28VIN
Positive InputVoltage Connection.
Positive Output1 Voltage Connection.
OutputReturn 1 Connection.
5
+VOUT1
OUTRET1
+VOUT2
OUTRET2
+VOUT3
OUTRET3
6
7
Positive Output2 Voltage Connection.
OutputReturn 2 Connection.
8
9
Positive Output3 Voltage Connection.
OutputReturn 3 Connection.
10
7.0 ENVIRONMENTAL SCREENING
Screening
Condition
Internal Visual
IPC-A-610,Class 3
Stabilization Bake
Temperature Cycling
MIL-STD-883,Method 1008,Condition B,125°C,24 hours
MIL-STD-883,Method 1010,Condition B, -55°C to +125°C,10 Cycles
Burn-In
96 hours at+100°C
100% at25 °C
Final Electrical
External Visual
Internal Procedure
8.0 ORDERING INFORMATION
VPT30-
28
5
15
15
T
W
1
2
3
4
5
6
7
(1)
Product
Series
(2)
(3)
Output 1
(4)
Output 2
(5)
Output 3
(6)
(7)
Package Option
Nominal Input
Voltage
Number of
Outputs
VPT30-
28
28 Volts
3R3
5
3.3 Volts
5 Volts
5
12
15
5 Volts
12 Volts
15 Volts
12
15
12 Volts
15 Volts
T
Triple
None
W
Standard Metal
Epoxy Encapsulated
Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional
environmental screening and testing, different input voltage, outputvoltage, power requirements, and source inspection.
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
9
VPT30-2800T SERIES DATASHEET
9.0 CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT, Inc. Sales Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
vptsales@vptpower.com
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or
omissions. The products or specifications contained herein are subject to change without notice. VPT, its logo and tagline are
registered trademarks in the U.S. Patent and Trademark Office.
10.0 ADDITIONAL INFORMATION
Visit the VPT website for additional technical resources, including:
Product Literature
Application Notes and White Papers
Technical Video Labs
Additional Products For Avionics/Military,
Hi-Temp, Hi-Rel COTS, and Space Applications
8.0
SALES INFORMATION: phone (425) 353-3010 • fax (425) 353-4030 • vptsales@vptpower.com • www.vptpower.com
10
相关型号:
©2020 ICPDF网 联系我们和版权申明