WCTQ13112700D [VISHAY]
RES NET,THIN FILM,1.27K OHMS,200WV,.5% +/-TOL,-100,100PPM TC,0303 CASE;型号: | WCTQ13112700D |
厂家: | VISHAY |
描述: | RES NET,THIN FILM,1.27K OHMS,200WV,.5% +/-TOL,-100,100PPM TC,0303 CASE |
文件: | 总3页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CTQ
Vishay Electro-Films
Thin Film Center-Tapped Resistors
FEATURES
• Wire bondable
Product may
not be to scale
• Center tap feature
• Chip size: 0.030 inches square
• Resistance range total: 10 Ω to 1 MΩ
• Resistor material: Tantalum nitride, self-passivating
• Moisture resistant
The CTQ series resistor chips offer a wide resistance range with
lower shunt capacitance than can be offered with the silicon
based resistors but only at a lower power level.
• Quartz substrate
The CTQ offers the designer flexibility in use as either a
single value resistor or as two resistor with a center tap
feature. The CTQs six bonding pads allows the user
increased layout flexibility.
• Low shunt capacitance < 0.1 pF
I
V
R
R
A
B
The CTQs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CTQs are 100 % electrically tested and
visually inspected to MIL-STD-883.
V
V
I
APPLICATIONS
The CTQ center-tapped resistor chips are used mainly in feedback circuits of amplifiers where ratio matching, low shunt
capacitance and tracking between two resistors is critical.
For low values, the resistance of the six bonding pad configuration can vary, depending on the method of measurement used.
Vishay EFI measures low-value resistors by the four-wire kelvin technique.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.5 %
0.1 %
PROCESS CODE
CLASS H*
102
CLASS K*
132
25 ppm/°C
50 ppm/°C
100 ppm/°C
100
130
101
131
*MIL-PRF-38534 inspection criteria
10 Ω
25 Ω
100 Ω
360 kΩ 620 kΩ 1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
TCR Tracking Between Halves (RA, RB)
Center Tap Ratio, RA/RB: Tolerance
2 ppm/°C*
1
1 % standard
Noise, MIL-STD-202, Method 308, 100 Ω - 250 kΩ
< 100 Ω or > 251 kΩ
- 35 dB typ.
- 20 db typ.
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, + 125 °C, 30 mW
0.5 % max. ΔR/R
0.25 % max. ΔR/R
- 55 °C to + 125 °C
0.1 % max. ΔR/R
0.2 % max. ΔR/R
400 V
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
1012 min.
Operating Voltage
200 V
DC Power Rating at + 70 °C (Derated to Zero at + 175 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
*5 ppm/°C for R < 100. 20 ppm/°C for R < 20
60 mW
0.25 % max. ΔR/R %
www.vishay.com
82
For technical questions, contact: efi@vishay.com
Document Number: 61030
Revision: 13-Mar-08
CTQ
Thin Film Center-Tapped Resistors
Vishay Electro-Films
DIMENSIONS in inches
0.030
STANDARD CONFIGURATION
Six locations. All pads 0.005 x 0.005 inches
0.026
0.030
TYPICAL RANGE
10 Ω - 26.9 Ω
TYPICAL RANGE
TYPICAL RANGE
100 Ω - 1 MΩ
27 Ω - 99 Ω
SCHEMATIC
RT = RA + RB
RA
RB
MECHANICAL SPECIFICATIONS in inches
PARAMETER
Chip Size
0.030 x 0.030 0.002 (0.762 x 0.762 0.05 mm)
0.010 0.003 (0.254 0.05 mm)
Quartz
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
Tantalum nitride, self-passivating
0.005 x 0.005 (0.127 x 0.127 mm)
6
10 kÅ minimum aluminum
None, lapped quartz
Backing
Options: Alphanumeric part marking, up to six characters
Gold bonding pads, 15k Å minimum
Center-tap ratio tolerances to 0.05 %
1 to 10 Ω values available
Contact Applications Engineer
ORDERING INFORMATION
Example: 100 % visual, 10 kΩ, 1 %, 100 ppm/°C TCR, aluminum pads, class H visual inspection
W
CTQ
PRODUCT
FAMILY
101
PROCESS
CODE
1000
RESISTANCE
VALUE
1
F
INSPECTION/
MULTIPLIER
CODE
TOLERANCE
CODE
PACKAGING
W = 100 % visually inspected
parts in matrix trays per
MIL-STD-883
See Process Code
table
Use first 4 digits
significant digits of the
resistance (RT)
D = 0.0001
C = 0.001
B = 0.01
A = 0.1
B = 0.1 %
C = 0.2 %
D = 0.5 %
F = 1.0 %
G = 2.0 %
H = 2.5 %
J = 5.0 %
K = 10 %
X = Sample, visually inspected
parts loaded in matrix
trays (4 % AQL)
0 = 1
1 = 10
2 = 100
3 = 1000
4 = 10 000
Document Number: 61030
Revision: 13-Mar-08
For technical questions, contact: efi@vishay.com
www.vishay.com
83
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明