VOM618A-7X001T [VISHAY]
Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package; 低输入电流,光电晶体管输出, SOP- 4 ,微型扁平封装型号: | VOM618A-7X001T |
厂家: | VISHAY |
描述: | Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package |
文件: | 总8页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VOM618A
Vishay Semiconductors
www.vishay.com
Low Input Current, Phototransistor Output, SOP-4,
Mini-Flat Package
FEATURES
• Operating temperature from - 55 °C to + 110 °C
• SOP-4 mini-flat package
A
C
C
E
4
3
1
2
• CTR range 40 % to 600 %, IF = 1 mA
• Isolation test voltage, 3750 VRMS
• Low saturation voltage
• Fast switching times
• Low coupling capacitance
i179089
• End-stackable, 0.100" (2.54 mm) spacing
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
APPLICATIONS
• PLCs
The 110 °C rated VOM618A has a GaAs infrared emitting
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a 4 pin
100 mil lead pitch miniflat package. It features a high current
transfer ratio with low input current, low coupling
capacitance, and high isolation voltage.
• Telecommunication
• Lighting control system
• Solar inverters
• AC drives
These coupling devices are designed for signal transmission
between two electrically separated circuits.
AGENCY APPROVALS
(All parts are certified under base model VOM618A)
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• FIMKO EN 60065 and EN 60950-1
• CQC: GB8898-2011, GB4943.1-2011
ORDERING INFORMATION
V
O
M
6
1
8
A
-
#
X
0
0
1
T
SOP-4
≥ 5
PART NUMBER
CTR
BIN
VDE OPTION
TAPE
AND
REEL
AGENCY
CERTIFIED/
PACKAGE
CTR (%)
1 mA
UL, cUL,
FIMKO,
CQC
50 to 600
40 to 80
63 to 125
100 to 200
160 to 320
50 to 100
250 to 500
80 to 160
130 to 260
200 to 400
SOP-4,
mini-flat
VOM618AT VOM618A-1T VOM618A-2T VOM618A-3T VOM618A-4T VOM618A-5T VOM618A-6T VOM618A-7T VOM618A-8T VOM618A-9T
VDE, UL,
cUL, CQC,
FIMKO
50 to 600
40 to 80
63 to 125
100 to 200
160 to 320
50 to 100
250 to 500
80 to 160
130 to 260
200 to 400
SOP-4,
mini-flat
VOM618A- VOM618A-
X001T 1X001T
VOM618A-
2X001T
VOM618A-
3X001T
VOM618A-
4X001T
VOM618A-
5X001T
VOM618A-
6X001T
VOM618A-
7X001T
VOM618A-
8X001T
VOM618A-
9X001T
Rev. 1.3, 10-Dec-12
Document Number: 83449
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
DC forward current
Reverse voltage
Power dissipation
Surge forward current
OUTPUT
IF
60
6
mA
V
VR
Pdiss
IFSM
70
2.5
mW
A
tp ≤ 10 μs
Collector emitter voltage
Emitter collector voltage
VCEO
VECO
IC
80
7
V
V
50
mA
mA
mW
Collector current
tp ≤ 1 ms
IC
100
150
Power dissipation
Pdiss
COUPLER
Isolation test voltage between emitter
and detector
t = 1 min
VISO
3750
VRMS
Total power dissipation
Operating temperature range
Storage temperature range
Junction temperature
Ptot
Tamb
Tstg
Tj
170
- 55 to + 110
- 55 to + 150
125
mW
°C
°C
°C
Soldering temperature (1)
Tsld
260
°C
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
See “Assembly Instructions” for surface mounted devices (www.vishay.com/doc?80054).
200
Coupled device
150
Phototransistor
100
IR-diode
50
0
0
25
50
75
100
125
Tamb - Ambient Temperature (°C)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
Rev. 1.3, 10-Dec-12
Document Number: 83449
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
OUTPUT
IF = 5 mA
VF
IR
1.1
0.01
9
1.6
10
V
V
R = 6 V
μA
pF
V
R = 0 V, f = 1 MHz
Cj
Collector emitter leakage
current
V
CE = 20 V
ICEO
0.4
100
nA
V
Collector emitter breakdown
voltage
IC = 100 μA
BVCEO
80
7
Emitter collector breakdown
voltage
IE = 10 μA
BVECO
CCE
V
Collector emitter capacitance
COUPLER
V
CE = 5 V, f = 1 MHz
2.8
pF
Coupling capacitance
Collector emitter saturation voltage
Cut-off frequency
f = 1 MHz
CC
VCEsat
fctr
0.3
0.12
110
pF
V
IF = 1 mA, IC = 0.25 mA
0.4
IF = 10 mA, VCC = 5 V, RL = 100 Ω
kHz
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
50
TYP.
MAX.
600
80
UNIT
%
VOM618A
CTR
VOM618A-1
VOM618A-2
VOM618A-3
VOM618A-4
VOM618A-5
VOM618A-6
VOM618A-7
VOM618A-8
VOM618A-9
CTR
40
%
CTR
63
125
200
320
100
500
160
260
400
%
CTR
100
160
50
%
IC/IF
IF = 1 mA, VCE = 5 V
CTR
%
CTR
%
CTR
250
80
%
CTR
%
CTR
130
200
%
CTR
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
NON-SATURATED
Rise and fall time
Fall time
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
tr
tf
5
4
7
6
μs
μs
μs
μs
IC = 2 mA, VCC = 5 V,
RL = 100 Ω
Turn-on time
Turn-off time
SATURATED
Rise and fall time
Fall time
ton
toff
tr
tf
6
29
8
μs
μs
μs
μs
IF = 1.6 mA, VCC = 5 V,
RL = 4.7 kΩ
Turn-on time
Turn-off time
ton
toff
35
Rev. 1.3, 10-Dec-12
Document Number: 83449
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
V
= 5 V
CC
Input pulse
Input
R
L
10 %
90 %
V
OUT
Output pulse
t
t
t
r
f
t
on
off
Fig. 2 - Test Circuit
Fig. 3 - Test Circuit and Waveforms
SAFETY AND INSULATION RATINGS
PARAMETER
SYMBOL
VALUE
UNIT
MAXIMUM SAFETY RATINGS
Output safety power
PSO
Isi
300
200
150
175
mW
mW
°C
Input safety current
Safety temperature
TS
Comparative tracking index
CTI
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
VISO
VIOTM
VIORM
RIO
3750
6000
565
1012
1011
55/110/21
2
VRMS
Vpeak
Vpeak
Ω
Insulation resistance
Tamb = 25 °C, VDC = 500 V
Tamb = 100 °C, VDC = 500 V
Isolation resistance
RIO
Ω
Climatic classification (according to IEC 68 part 1)
Environment (pollution degree in accordance to DIN VDE 0109)
Internal creepage
External creepage
Clearance
≥ 5
mm
mm
mm
mm
≥ 5
≥ 5
Insulation thickness
≥ 0.4
Note
•
As per DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings.
Compliance with the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
100
IF = 25 mA
50
40
30
20
10
0
Tamb = 110 °C
IF = 20 mA
T
T
T
T
amb = 75 °C
amb = 25 °C
amb = 0 °C
IF = 15 mA
10
1
amb = - 55 °C
IF = 10 mA
IF = 5 mA
IF = 1 mA
0.1
0.6
0.8
1.0
1.2
1.4
1.6
0
1
2
3
4
5
6
7
8
9
10
VCE - Collector Emitter Voltage (non-sat) (V)
VF - Forward Voltage (V)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 5 - Collector Current vs. Collector Emitter Voltage
(non-saturated)
Rev. 1.3, 10-Dec-12
Document Number: 83449
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
10 000
1000
100
10
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
IF = 0 mA
VCE = 40 V
VCE = 24 V
1
0.1
VCE = 12 V
0.01
0.001
Normalized to CTR value:
IF = 1 mA, VCE = 5 V, Tamb = 25 °C
- 60 - 40 - 20
0
20 40 60 80 100 120
- 60 - 40 - 20
0
20 40 60 80 100 120
Tamb - Ambient Temperature (°C)
Tamb - Ambient Temperature (°C)
Fig. 6 - Collector Emitter Current vs. Ambient Temperature
Fig. 9 - Normalized Current Transfer Ratio vs.
Ambient Temperature (saturated)
35
30
1.4
1.2
1.0
0.8
0.6
0.4
IF = 25 mA
25
IF = 10 mA
IF = 1 mA
20
15
10
5
IF = 5 mA
IF = 2 mA
IF = 0.5 mA
0.2
0
Normalized to CTR value:
IF = 1 mA, VCE = 5 V, Tamb = 25 °C
0
0.0
0.1
0.2
0.3
0.4
- 60 - 40 - 20
0
20 40 60 80 100 120
VCE - Collector Emitter Voltage (V)
Tamb - Ambient Temperature (°C)
Fig. 7 - Collector Current vs. Collector Emitter Voltage
(saturated)
Fig. 10 - Normalized Current Transfer Ratio vs.
Ambient Temperature (non-saturated)
0.12
2.0
Tamb = 0 °C
IF = 1 mA
1.8
0.10
1.6
Tamb = - 55 °C
1.4
0.08
0.06
0.04
0.02
0.00
1.2
1.0
0.8
0.6
Tamb = 25 °C
0.4
0.2
0.0
Tamb = 110 °C
10
- 60 - 40 - 20
0
20 40 60 80 100 120
0.1
1
100
Tamb - Ambient Temperature (°C)
IF - Forward Current (mA)
Fig. 8 - Collector Emitter Voltage vs. Ambient Temperature
(saturated)
Fig. 11 - Current Transfer Ratio vs. Forward Current (saturated)
normalized to 1 mA at 25 °C
Rev. 1.3, 10-Dec-12
Document Number: 83449
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
2.5
2.0
1.5
1.0
0.5
0.0
1000
100
10
Tamb = 0 °C
VCE = 5 V
IF = 1 mA
Tamb = - 55 °C
toff (μs)
ton (μs)
Tamb = 25 °C
Tamb = 110 °C
1
0.1
1
10
100
0
5
10
15
20
RL - Load Resistance (kΩ)
IF - Forward Current (mA)
Fig. 12 - Current Transfer Ratio vs. Forward Current (non-saturated)
normalized to 1 mA at 25 °C
Fig. 15 - Switching Time vs. Load Resistance
0
1000
VCE = 5 V,
Tamb = 25 °C
RL = 100 Ω
- 5
- 10
100
10
1
- 15
- 20
- 25
- 30
- 35
- 40
RL = 1000 Ω
VCE = 5 V
1
10
100
1000
0.1
1
10
100
IC - Collector Current (mA)
f - Cut-off Frequency (kHz)
Fig. 13 - Cut-off Frequency (- 3 dB) vs. Collector Current
Fig. 16 - Voltage Gain vs. Cut-off Frequency
0
VCE = 5 V
- 20
RL = 100 Ω
- 40
- 60
- 80
- 100
RL = 1000 Ω
- 120
- 140
- 160
1
10
100
1000
f - Cut-off Frequency (kHz)
Fig. 14 - FCTR vs. Phase Angle
Rev. 1.3, 10-Dec-12
Document Number: 83449
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOM618A
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters
2.54 0.25
4
3
1
Pin one ID
1
2
6.5
3.85 0.3
5.30 0.3
7.00 +- 0.27
0.40 0.1
i178048
PACKAGE MARKING (example of VOM618A-3X001T)
618A3
V YWW
25X
Notes
•
•
Only option 1 is reflected in the package marking with the character “X”.
Tape and reel suffix (T) is not part of the package marking.
TAPE AND REEL DIMENSIONS in millimeters
17.1
1.5 0.1
2
0.1
4
0.1
1.75 0.1
5.5 0.1
12 0.3
330
(13")
8
0.1
0.3 0.05
2.45 0.1
Fig. 17 - Reel Dimensions (3000 units per reel)
Fig. 18 - Tape Dimensions
Rev. 1.3, 10-Dec-12
Document Number: 83449
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明