TNPW0402MK32BHED0H [VISHAY]
High Stability Thin Film Flat Chip Resistors;![TNPW0402MK32BHED0H](http://pdffile.icpdf.com/pdf2/p00353/img/icpdf/TNPW0201MK32_2172585_icpdf.jpg)
型号: | TNPW0402MK32BHED0H |
厂家: | ![]() |
描述: | High Stability Thin Film Flat Chip Resistors |
文件: | 总13页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TNPW e3
www.vishay.com
Vishay
High Stability Thin Film Flat Chip Resistors
FEATURES
• Superior moisture resistivity (85 °C; 85 % RH)
• Excellent overall stability at different
environmental conditions 0.05 % (1000 h
rated power at 70 °C)
• AEC-Q200 qualified
• Single lot date code (optional)
• Sulfur resistance verified according to
ASTM B 809
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive
TNPW e3 precision thin film flat chip resistors are the perfect
choice for most fields of modern electronics where highest
reliability and stability is of major concern. Typical
applications include automotive, industrial, test and
measuring equipment, and medical equipment.
• Industrial equipment
• Test and measuring equipment
• Medical equipment
TECHNICAL SPECIFICATIONS
DESCRIPTION
TNPW0201 e3 (1) TNPW0402 e3
TNPW0603 e3 TNPW0805 e3 TNPW1206 e3
TNPW1210 e3
1210
Imperial size
0201
0402
0603
0805
1206
Metric size code
Resistance range
Resistance tolerance
Temperature coefficient
RR0603M
RR1005M
RR1608M
RR2012M
RR3216M
RR3225M
22
to 40 k
10
to 100 k
1
to 332 k
1
to 1 M
1 %; 0.5 %; 0.1 %
50 ppm/ꢀ; 25 ppm/ꢀ; 15 ppm/ꢀ; 10 ppm/ꢀ
1
to 2 M
10 to 3.01 M
0.5 %; 0.1 %
25 ppm/ꢀ
(2)
Rated dissipation, P70
Operating voltage,
max. ACRMS or DC
Permissible film
temperature, F max.
0.075 W
0.100 W
50 V
0.125 W
0.200 W
0.400 W
0.500 W
200 V
25 V
75 V
150 V
200 V
U
155 °C
-55 °C to 155 °C
(2)
Operating temperature range
Internal thermal resistance (2)
-
90 ꢀ/W
75 V
63 ꢀ/W
38 ꢀ/W
32 ꢀ/W
300 V
-
Permissible voltage against
ambient (insulation):
1 min; Uins
Failure rate: FITobserved
50 V
100 V
0.1 x 10-9/h
200 V
300 V
Notes
(1)
AEC-Q200 qualification for ohmic values above 25 k pending
Please refer to APPLICATION INFORMATION
(2)
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
Please consider the application note “Thermal Management in Surface-Mounted Resistor Applications”
(www.vishay.com/doc?28844) for information on the general nature of thermal resistance.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 21-Feb-2020
Document Number: 28758
1
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE
STANDARD
0.050 W
POWER
0.075 W
TNPW0201 e3
TNPW0402 e3
0.063 W
0.100 W
TNPW0603 e3
0.100 W
0.125 W
Rated dissipation, P70
TNPW0805 e3
0.125 W
0.200 W
TNPW1206 e3
0.250 W
0.400 W
TNPW1210 e3
0.330 W
0.500 W
Operating temperature range
Permissible film temperature, F max.
TNPW0201 e3
-55 °C to 125 °C
125 °C
-55 °C to 155 °C
155 °C
22 to 40 k
10 to 100 k
1 to 332 k
1 to 1 M
1 to 2 M
10 to 3.01 M
0.05 %
22 to 40 k
10 to 100 k
1 to 332 k
1 to 1 M
1 to 2 M
10 to 3.01 M
0.10 %
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
Max. resistance change at P70 for resistance range,
|R/R| after:
TNPW1206 e3
TNPW1210 e3
1000 h
8000 h
0.10 %
0.20 %
225 000 h
0.30 %
0.60 %
Note
•
The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to
different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the
circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please
consider the application note “Thermal Management in Surface-Mounted Resistor Applications” (www.vishay.com/doc?28844) for
information on the general nature of thermal resistance
Revision: 21-Feb-2020
Document Number: 28758
2
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE
TCR
TOLERANCE
0.5 %
0.1 %
1 %
RESISTANCE
22 to 40 k
22 to 25 k
E-SERIES
E24; E192
E24; E96
E24; E192
E24; E96
TNPW0201 e3
25 ppm/ꢀ
10 to 100 k
47 to 100 k
10 to 100 k
50 ppm/ꢀ
25 ppm/ꢀ
0.5 %
0.1 %
1 %
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
0.5 %
0.1 %
E24; E192
15 ppm/ꢀ
10 ppm/ꢀ
47 to 100 k
0.1 %
1 %
0.5 %
0.1 %
1 %
E24; E96
E24; E192
E24; E96
1 to 332 k
3.5 to 332 k
1 to 332 k
3.5 to 332 k
47 to 332 k
50 ppm/ꢀ
25 ppm/ꢀ
0.5 %
0.1 %
E24; E192
15 ppm/ꢀ
10 ppm/ꢀ
0.1 %
1 %
0.5 %
0.1 %
1 %
E24; E96
E24; E192
E24; E96
1 to 1 M
3.5 to 1 M
1 to 1 M
50 ppm/ꢀ
25 ppm/ꢀ
0.5 %
0.1 %
E24; E192
15 ppm/ꢀ
10 ppm/ꢀ
3.5 to 1 M
0.1 %
1 %
0.5 %
0.1 %
1 %
E24; E96
E24; E192
E24; E96
1 to 2 M
3.5 to 2 M
1 to 2 M
3.5 to 2 M
47 to 2 M
50 ppm/ꢀ
25 ppm/ꢀ
0.5 %
0.1 %
E24; E192
15 ppm/ꢀ
10 ppm/ꢀ
0.1 %
1 %
0.5 %
0.1 %
1 %
E24; E96
E24; E192
E24; E96
10 to 3.01 M
47 to 2.13 M
10 to 3.01 M
50 ppm/ꢀ
25 ppm/ꢀ
TNPW1210 e3
0.5 %
0.1 %
E24; E192
15 ppm/ꢀ
10 ppm/ꢀ
47 to 2.13 M
0.1 %
Revision: 21-Feb-2020
Document Number: 28758
3
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
PACKAGING
PACKAGING
STYLE
PACKAGING
DIMENSIONS
TYPE / SIZE
CODE
QUANTITY
WIDTH
PITCH
TNPW0201 e3
ET7 = ED
EP1 = EP
ET2 = EI
10 000
(1)
1000
2 mm
Ø 180 mm / 7"
TNPW0402 e3
5000
Paper tape according
IEC 60286-3, Type 1a
ET7 = ED
E52 = EN
ET1 = EA
ET6 = EC (2)
10 000
8 mm
(1)
1000
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
4 mm
4 mm
Ø 180 mm / 7"
Ø 330 mm / 13"
5000
20 000
Notes
(1)
1000 pieces packaging is available only for precision resistors with tolerance 0.1 % and temperature coefficient 25 ppm/ꢀ
20 000 pieces packaging is available only for resistors with TCR 25 ppm/ꢀ and 50 ppm/ꢀ
(2)
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: TNPW12061K32DEEA
T
N
P
W
1
2
0
6
1
K
3
2
D
E
E
A
TYPE / SIZE
RESISTANCE
TOLERANCE
TCR
PACꢀAGING
SPECIAL
TNPW0201
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210
R = decimal
K = thousand
M = million
(4 digits)
B = 0.1 %
D = 0.5 %
F = 1.0 %
H = 50 ppm/ꢀ
E = 25 ppm/ꢀ
X = 15 ppm/ꢀ
Y = 10 ppm/ꢀ
ED
Up to 2 digits
Blank = standard
0H = single lot date
code
EP
EI
EN
EA
EC
(E.. = lead-free)
Product Description: TNPW1206 1K32 0.5 % T-9 ET1 e3
TNPW1206
1K32
0.5 %
T-9
ET1
e3
TYPE / SIZE
RESISTANCE
TOLERANCE
TCR
PACꢀAGING
LEAD (Pb)-FREE
TNPW0201
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210
54R1 = 54.1
1K32 = 1320
0.1 %
0.5 %
1.0 %
T-2 = 50 ppm/ꢀ
T-9 = 25 ppm/ꢀ
T-10 = 15 ppm/ꢀ
T-13 = 10 ppm/ꢀ
ET7
EP1
e3 = pure matte tin
termination finish
ET2
E52
BV 20545 = single
lot date code
ET1
ET6
(E.. = lead-free)
Note
•
The product can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
Revision: 21-Feb-2020
Document Number: 28758
4
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility.
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
A
homogeneous film of special metal alloy is deposited on a
high grade ceramic substrate (AI2O3) and conditioned to
achieve the desired temperature coefficient. Specially
designed inner contacts are deposited on both sides. A
special laser is used to achieve the target value by smoothly
fine trimming the resistive layer without damaging the
ceramics. A further conditioning is applied in order to
stabilize the trimming result. The resistor elements are
covered by a protective coating designed for electrical,
mechanical and climatic protection. The terminations
receive a final pure matte tin on nickel plating.
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (2)
• The Global Automotive Declarable Substance List
(GADSL) (3)
• The REACH regulation (1907/2006/EC) and the related list
(4)
of substances with very high concern (SVHC)
supply chain
for its
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. This
includes full screening for the elimination of products with a
potential risk of early life failures (feasible for R 10 ). Only
accepted products are laid directly into the tape in
Hence the products fully comply with the following
directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous
accordance with IEC 60286-3, Type 1a (1)
.
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
ASSEMBLY
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1 (1). The encapsulation is resistant to all
cleaning solvents commonly used in the electronics
industry, including alcohols, esters and aqueous solutions.
The suitability of conformal coatings, potting compounds
and their processes, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system.
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
RELATED PRODUCTS
The TNPW with SnPb termination plating is designed for
those applications, where lead bearing terminations are
mandatory. For ordering TNPW with SnPb terminations
please refer to latest edition of datasheet TNPW
(www.vishay.com/doc?31006).
The resistors are RoHS-compliant, the pure matte tin plating
provides
compatibility
with
lead
(Pb)-free
and
TNPU e3 ultra precision thin film flat chip resistors combine
the proven reliability of TNPW e3 products with a most
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
advanced
level
of
precision
and
stability
(www.vishay.com/doc?28779).
TNPS .... ESCC high-reliability thin film chip resistors are the
premium choice for design and manufacture of equipment,
where matured technology and proven reliability are
of utmost importance. They are regularly used in
communication and research satellites and fit equally well
into aircraft and military electronic systems.
Approval of the TNPS .... ESCC products is granted by the
European Space Components Coordination and registered
in
the
ESCC
Qualified
Parts
List,
REP005
(www.vishay.com/doc?28789).
TNPV e3 High Voltage Thin Film Flat Chip Resistors are
designed for most fields of modern electronics where
precision, reliability and stability at high operating voltage
are primary concerns (www.vishay.com/doc?28881).
Notes
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
(2)
The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474
The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org
The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table
(3)
(4)
Revision: 21-Feb-2020
Document Number: 28758
5
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
FUNCTIONAL PERFORMANCE
3
2
120
TNPW1206 e3
TNPW0805 e3
TNPW0603 e3
110
1
0.5
TNPW0603 e3
TNPW0805 e3
TNPW0402 e3
100
0.3
TNPW0402 e3
90
0.1
0.05
0.03
TNPW1206 e3
80
70
60
0.01
100
10
100
1K
10K
100K
1K
10K
100K
1M
Resistance Value in Ω
Resistance Value in Ω
Non-Linearity
Current Noise
60
60
TNPW0603 e3
TNPW0603 e3
40
20
40
20
0
10 Ω
10 Ω
0
- 20
- 40
- 60
- 80
100 Ω
1 kΩ
100 Ω
1 kΩ
- 40
- 60
- 80
4.75 kΩ
10 kΩ
4.75 kΩ
10 kΩ
500 1000
50 100
1
5
10
50 100
1
5
10
500 1000
Frequency f in MHz
Frequency f in MHz
HF Performance (1)
HF Performance (1)
60
60
TNPW0805 e3
TNPW0805 e3
40
40
20
0
20
0
10 Ω
10Ω
100 Ω
1 kΩ
100Ω
- 20
- 40
- 60
- 80
- 20
1 kΩ
- 40
- 60
10 kΩ
10 kΩ
500 1000
Frequency f in MHz
- 80
50 100
1
5
10
500 1000
Frequency f in MHz
1
5
10
50 100
HF Performance (1)
HF Performance (1)
Note
(1)
Typical figures. HF-characteristic also depends on termination and circuit design
Revision: 21-Feb-2020
Document Number: 28758
6
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
FUNCTIONAL PERFORMANCE
0.6
W
0.5
TNPW0201 e3
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
0.4
0.3
0.2
0.1
0
-55
50
100
125 °C 155
0
70
Ambient Temparature
amb
Derating - Standard Operation
0.6
W
0.5
TNPW0201 e3
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
0.4
0.3
0.2
0.1
0
-55
50
100
125 °C 155
0
70
Ambient Temparature
amb
Derating - Power Operation
Note
•
The solid line is based on IEC/EN reference test conditions which is considered as standard mode. However, above that the maximum
permissible film temperature is 155 °C (dashed line)
Revision: 21-Feb-2020
Document Number: 28758
7
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
FUNCTIONAL PERFORMANCE
3K
3K
1K
TNPW0805 e3
TNPW0805 e3
1K
100
10
TNPW0603 e3
TNPW0603 e3
100
10
10R
100R
1K
10K
100K
10R
100R
1K
10K
100K
Resistance Value
Resistance Value
in Ω
in Ω
Single-Pulse High Voltage Overload
Test 1.2/50 μs EN140000 4.27
Single-Pulse High Voltage Overload
Test 10/700 μs EN140000 4.27
100 W
100 W
TNPW1206 e3
TNPW0805 e3
TNPW1206 e3
P
P
TNPW0805 e3
TNPW0603 e3
10 W
10 W
TNPW0603 e3
1 W
1 W
Conditions:
Conditions:
0, n ≤ 1000 and Ui ≤ Ui, max.
Pmax.
≤
Pmax. (including derating)
P
and Ui
≤
Ui, max.
0.1 W
10 µs
0.1 W
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration ti
Pulse Duration ti
Maximum Pulse Load Pi, max.
Maximum Pulse Load Pi, max.
for Continuous Pulses
for Single Pulses
10 000 V
U
1000 V
TNPW1206 e3
TNPW0805 e3
TNPW0603 e3
100 V
10 V
Conditions:
Pi ≤ Pi, max.
10 µs
100 µs
1 ms
10 ms
100 ms
1 s
10 s
Pulse Duration ti
Maximum Pulse Voltage Ui, max.
Revision: 21-Feb-2020
Document Number: 28758
8
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
TEST AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
The testing also covers most of the requirements specified
by EIA / ECA-703 and JIS-C-5201-1.
EN 60115-1, generic specification
The tests are carried out under standard atmospheric
conditions in accordance with IEC 60068-1, 4.3, whereupon
the following values are applied:
EN 60115-8 (successor of EN 140400), sectional
specification
Temperature: 15 °C to 35 °C
EN 140401-801, detail specification
IEC 60068-2-xx, test methods
Relative humidity: 25 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-801. The detail specification
EN 140401-801 does not cover case size 0201. The table
presents only the most important tests, for the full test
schedule refer to the documents listed above. However,
some additional tests and a number of improvements
against those minimum requirements have been included.
A climatic category LCT / UCT / 56 is applied, defined by the
lower category temperature (LCT), the upper category
temperature (UCT), and the duration of exposure in the
damp heat, steady state test (56 days).
The components are mounted for testing on printed circuit
boards in accordance with EN 60115-8, 2.4.2, unless
otherwise specified.
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1 IEC 60068-2 (1)
REQUIREMENTS
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
CLAUSE
TEST METHOD
Stability for product types:
TNPW0201 e3
22 to 40 k
10 to 100 k
1 to 332 k
1 to 1 M
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
1 to 2 M
10 to 3.01 M
4.5
-
-
Resistance
-
1 %; 0.5 %; 0.1 %
Temperature
coefficient
At (20 / -55 / 20) °C
and (20 / 125 / 20) °C
50 ppm/ꢀ; 25 ppm/ꢀ;
15 ppm/ꢀ; 10 ppm/ꢀ
4.8
U = P70 x R or U = Umax.
whichever is the less severe;
1.5 h on; 0.5 h off;
;
Endurance
at 70 °C:
standard
operation
mode
70 °C; 1000 h
70 °C; 8000 h
(0.05 % R + 0.01 )
(0.1 % R + 0.02 )
4.25.1
-
U = P70 x R or U = Umax.
whichever is the less severe;
1.5 h on; 0.5 h off;
;
Endurance
at 70 °C:
power
operation
mode
70 °C; 1000 h
70 °C; 8000 h
125 °C; 1000 h
(0.1 % R + 0.01 )
(0.2 % R + 0.02 )
(0.05 % R + 0.01 )
Endurance at
upper category
temperature
4.25.3
4.24
-
155 °C; 1000 h
(0.1 % R + 0.02 )
(0.1 % R + 0.01 )
Damp heat,
steady state
(40 2) °C; 56 days;
(93 3) % RH
78 (Cab)
Damp heat,
steady state
accelerated:
Standard
operation
mode
(85 2) °C
(85 5) % RH
U = 0.1 x P70 x R ;
U 0.3 x Umax.; 1000 h
4.37
-
67 (Cy)
1 (Ab)
(0.25 % R + 0.05 )
(0.05 % R + 0.01 )
Cold
-55 °C; 2 h
Revision: 21-Feb-2020
Document Number: 28758
9
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1 IEC 60068-2 (1)
REQUIREMENTS
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
CLAUSE
TEST METHOD
Stability for product types:
TNPW0201 e3
22 to 40 k
10 to 100 k
1 to 332 k
1 to 1 M
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
1 to 2 M
10 to 3.01 M
30 min at LCT and 30 min at UCT;
LCT = - 55 °C; UCT = 125 °C;
1000 cycles
Rapid change
of temperature
4.19
4.13
14 (Na)
(0.1 % R + 0.01 )
(0.05 % R + 0.01 )
Short time
overload:
standard
operation
mode
U = 2.5 x P70 x R
or U = 2 x Umax.
;
whichever is the less severe;
5 s
-
Short time
overload:
power
operation
mode
U = 2.5 x P70 x R
or U = 2 x Umax.
;
(0.1 % R + 0.01 )
whichever is the less severe;
5 s
Single pulse
high voltage
overload:
standard
operation
mode
Severity no. 4:
U = 10 x P70 x R or
(0.5 % R + 0.02 )
no visible damage
U = 2 x Umax.
;
whichever is the less severe;
10 pulses 10 μs/700 μs
4.27
-
Single pulse
high voltage
overload:
power
operation
mode
Severity no. 4:
U = 10 x P70 x R or
(1 % R + 0.02 )
no visible damage
U = 2 x Umax.
;
whichever is the less severe;
10 pulses 10 μs/700 μs
Periodic
electric
overload:
standard
operation
mode
U = 15 x P70 x R
or U = 2 x Umax.
;
(0.5 % R + 0.05 )
no visible damage
0.1 s on; 2.5 s off;
whichever is the less severe;
1000 cycles
4.39
-
Periodic
electric
overload:
power
U = 15 x P70 x R
or U = 2 x Umax.
;
(1 % R + 0.05 )
no visible damage
0.1 s on; 2.5 s off;
whichever is the less severe;
1000 cycles
operation
mode
IEC 61340-3-1 (1)
3 pos. + 3 neg.
;
(equivalent to MIL-STD-883, method
3015)
Electro static
discharge
(human body
model)
4.38
4.22
-
TNPW0201 e3: 200 V
TNPW0402 e3: 400 V
TNPW0603 e3: 1000 V
TNPW0805 e3: 1500 V
TNPW 1206 e3: 2000 V
(0.5 % R + 0.05 )
Endurance by sweeping;
10 Hz to 2000 Hz;
no resonance;
(0.05 % R + 0.01 )
no visible damage
6 (Fc)
Vibration
amplitude 1.5 mm or
200 m/s2; 7.5 h
Revision: 21-Feb-2020
Document Number: 28758
10
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1 IEC 60068-2 (1)
REQUIREMENTS
PERMISSIBLE CHANGE (R)
TEST
PROCEDURE
CLAUSE
TEST METHOD
Stability for product types:
TNPW0201 e3
22 to 40 k
10 to 100 k
1 to 332 k
1 to 1 M
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
1 to 2 M
10 to 3.01 M
Solder bath method;
SnPb40; non-activated flux
(215 3) °C; (3 0.3) s
Good tinning ( 95 % covered);
4.17
58 (Td)
Solderability
Solder bath method;
SnAg3Cu0.5 or SnAg3.5; non-activated
flux
no visible damage
(235 3) °C; (2 0.2) s
Solder bath method;
Resistance to
soldering heat
4.18
4.29
58 (Td)
45 (XA)
(0.02 % R + 0.01 )
(260 5) °C; (10 1) s (2)
Component
solvent
resistance
Isopropyl alcohol + 50 °C; method 2
No visible damage
TNPW0201 e3: 2 N
Shear
4.32
4.33
21 (Ue3)
21 (Ue1)
TNPW0402 e3 and TNPW0603 e3: 9 N
TNPW0805 e3 and TNPW1206 e3: 45 N
No visible damage
(adhesion)
(0.05 % R + 0.01 )
no visible damage,
no open circuit in bent position
Substrate
bending
Depth 2 mm, 3 times
4.7
-
-
Voltage proof
Flammability
U
RMS = Uins; 60 5 s
No flashover or breakdown
No burning after 30 s
IEC 60695-11-5 (1)
needle flame test; 10 s
,
4.35
Notes
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
For TNPW0201 e3 only similar to DIN EN 60115-8 test procedure. Due to the components small size they were fixed by glue previous to
testing instead of applying tweezers
(2)
Revision: 21-Feb-2020
Document Number: 28758
11
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
DIMENSIONS
Vishay
L
Tt
W
H
Tb
DIMENSIONS AND MASS
L
W
(mm)
H
(mm)
Tt / Tb
(mm)
MASS
(mg)
TYPE / SIZE
(mm)
TNPW0201 e3
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
0.6 0.05
0.3 0.05
0.5 0.05
0.85 0.10
1.25 0.15
1.6 0.15
2.45 0.15
0.23 0.03
0.35 0.05
0.45 0.10
0.45 0.10
0.55 0.10
0.60 0.15
0.12 0.05
0.2 0.10
0.3 0.20
0.4 0.20
0.5 0.25
0.5 0.25
0.14
0.65
2
1.0 0.05
1.55 0.05
2.0 0.1
5.5
10
3.2 + 0.1 / - 0.2
3.2 + 0.1 / - 0.2
16
SOLDER PAD DIMENSIONS
b
l
a
RECOMMENDED SOLDER PAD DIMENSIONS
REFLOW SOLDERING
TYPE / SIZE
WAVE SOLDERING
a
b
l
a
b
(mm)
l
(mm)
(mm)
(mm)
(mm)
(mm)
TNPW0201 e3
TNPW0402 e3
TNPW0603 e3
TNPW0805 e3
TNPW1206 e3
TNPW1210 e3
0.28
0.4
0.5
0.7
0.9
0.9
0.43
0.6
0.9
1.3
1.7
2.5
0.23
0.5
1.0
1.2
2.0
2.0
-
-
-
-
-
-
0.9
0.9
1.1
1.1
0.9
1.3
1.7
2.5
1.0
1.3
2.3
2.3
Revision: 21-Feb-2020
Document Number: 28758
12
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明