TMC100130R0HE01 [VISHAY]

Fixed Resistor, Wire Wound, 100W, 130ohm, 3% +/-Tol, 20ppm/Cel, Chassis Mount, GREEN;


型号：	TMC100130R0HE01
厂家：	VISHAY
描述：	Fixed Resistor, Wire Wound, 100W, 130ohm, 3% +/-Tol, 20ppm/Cel, Chassis Mount, GREEN 电阻器
文件：	总5页 (文件大小：189K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TMC

Vishay Huntington

www.vishay.com

Wirewound Resistors, Industrial Power, Aluminum Housed,

Chassis Mount

FEATURES

• Molded construction for total environmental

protection

• Complete welded construction

• Available in non-inductive styles (NI special)

with Ayrton-Perry winding for lowest reactive

components

• Mounts on chassis to utilize heat-sink effect

• Excellent stability in operation (< 1 % change in

resistance)

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

RESISTANCE

RANGE



WEIGHT

(typical)

GLOBAL

MODEL

HISTORICAL

MODEL

TOLERANCE

ꢀ

P_{25 °C}

TMC005

TMC005…NI

TMC010

TMC010…NI

TMC025

TMC025…NI

TMC050

TMC050…NI

TMC100

TMC100…NI

TMC250

TMC-5

TMC-5-…-NI

TMC-10

TMC-10-…-NI

TMC-25

TMC-25-…-NI

TMC-50

TMC-50-…-NI

TMC-100

7.5

12.5

100

250

0.02 to 24.5K

0.05 to 12.75K

0.01 to 47.1K

0.05 to 23.5K

0.01 to 95.2K

0.05 to 47.6K

0.01 to 273K

0.05 to 136K

0.05 to 90K

1, 3, 5

353

637

TMC-100-…-NI

TMC-250

TMC-250-…-NI

0.05 to 37.5K

0.05 to 116K

0.05 to 48.5K

TMC250…NI

Note

•

The NI is for two digit “special” number to indicate a non-inductive part.

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

TMC RESISTOR CHARACTERISTICS

Temperature Coefficient

Maximum Working Voltage

Insulation Resistance

Solderability

ppm/°C

20 for 10  and above; 50 for 1  to 9.9 , 100 for 0.5  to 0.99 

(P x R)^1/2

10 000 M minimum dry, 1000 M minimum after moisture test

Meets requirements of ANSI J-STD-002

- 55 to + 250



Operating Temperature Range

°C

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: TMC0054R125FE02NI (visit www.vishay.net Vishay Dale parts numbering manual for all options)

GLOBAL MODEL

(6 digits)

VALUE

(5 digits)

TOLERANCE

(1 digit)

PACKAGING CODE

(3 digits)

SPECIAL

(up to 2 digits)

(See Standard Electrical

Specifications Global

Model column

R = Decimal

K = Thousand

15R00 = 15 

10K00 = 10 k

F = 1 %

H = 3 %

J = 5 %

E02 = Lead (Pb)-free, card pack

(TMC005 to TMC050)

E01 = Lead (Pb)-free, skin pack

(TMC100 and TMC250)

NI = Non-inductive

(Dash Number)

From 1 to 99

for options)

as applicable

Historical Part Number example: TMC-5-4.125-1ꢀ-NI

TMC-5

4.125 

1 ꢀ

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE

SPECIAL

Revision: 30-Aug-12

Document Number: 31806

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TMC

Vishay Huntington

www.vishay.com

DIMENSIONS in inches [millimeters]

TMC005, 010, 025, 050

TMC005…NI, 010, 025, 050

DIMENSIONS in inches [millimeters]

GLOBAL

MODEL

0.444

0.005

0.490

0.005

0.600

0.030

1.125

0.062

0.334

0.015

[8.48

0.646

0.015

[16.41

0.320

0.015

[8.13

0.065

0.010

[1.65

0.133

0.010

[3.38

0.078

0.010

[1.98

0.093

0.005

[2.36

0.078

0.015

[1.98

0.050

0.005

[1.27

0.266

0.062

[6.76

1.57]

TMC005

TMC005…NI

[11.28 [12.45 [15.24 [28.58

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

0.800

0.015

[20.32

0.390

0.015

[9.91

0.075

0.010

[1.91

0.165

0.010

[4.19

0.093

0.010

[2.36

0.094

0.005

[2.39

0.102

0.015

[2.59

0.085

0.005

[2.16

0.312

0.062

[7.92

1.57]

0.420

0.015

[10.67

0.381]

0.562

0.005

0.625

0.005

0.750

0.031

1.375

0.062

TMC010

TMC010…NI

[14.27 [15.88 [19.05 [34.93

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

0.719

0.005

0.781

0.005

1.062

0.031

1.938

0.062

0.550

0.015

1.080

0.015

0.546

0.015

0.075

0.010

[1.91

0.231

0.010

[5.87

0.172

0.010

[4.37

0.125

0.005

[3.18

0.115

0.015

[2.92

0.085

0.005

[2.16

0.438

0.062

[11.13

1.57]

TMC025

TMC025…NI

[18.26 [19.84 [26.97 [49.23 [13.97 [27.43 [13.87

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

1.562

0.005

[39.67

0.127]

1.968

0.031

2.781

0.062

0.630

0.015

1.140

0.015

0.610

0.015

0.088

0.010

[2.24

0.260

0.010

[6.60

0.196

0.010

[4.98

0.125

0.005

[3.18

0.107

0.015

[2.72

0.085

0.005

[2.16

0.438

0.062

[11.13

1.57]

0.844

0.005

[21.44

0.127]

TMC050

TMC050…NI

[49.99 [70.64 [16.00 [28.96 [15.49

0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

DIMENSIONS in inches [millimeters]

TMC100, TMC100…NI

0.188 0.010

[4.78 0.254ꢁ

Dia. typ.

Nickel plated

brass nut

ꢂ.50 0.0ꢂ1

[88.90 0.787ꢁ

1.812 0.0ꢂ1

[46.02 0.787ꢁ

stainless steel stud

1.125 0.0ꢂ1

[28.58 0.787ꢁ

2.812 0.0ꢂ1

[71.42 0.787ꢁ

1.75 0.0ꢂ1

[44.45 0.787ꢁ

2.25 0.010

[57.15 0.254ꢁ

0.ꢂ75 0.0ꢂ1

[9.52 0.787ꢁ

0.188 0.0ꢂ1

[4.78 0.787ꢁ

0.989 0.0ꢂ1

[25.12 0.787ꢁ

12 - 24

UNC-2A

Thd. typ.

0.770 0.015

[19.56 0.ꢂ81ꢁ

2.75 0.010

[69.85 0.254ꢁ

5.478 0.09ꢂ

[1ꢂ9.14 2.ꢂ6ꢁ

typ.

TMC250, TMC250…NI

0.188 0.010

[4.78 0.254ꢁ

Dia. typ.

1/4 - 20

UNC-2A thd. typ.

Nickel plated

brass nut

stainless steel stud

2.125 0.0ꢂ1

[5ꢂ.98 0.787ꢁ

4.50 0.0ꢂ1

[114.ꢂ0 0.787ꢁ

1.25 0.062

[ꢂ1.75 1.575ꢁ

ꢂ.0 0.0ꢂ1

[76.20 0.787ꢁ

2.188 0.0ꢂ1

[55.58 0.787ꢁ

2.50 0.010

[6ꢂ.50 0.254ꢁ

0.875 0.010

[22.2ꢂ 0.254ꢁ

ꢂ.0 0.010

[76.20 0.254ꢁ

0.250 0.0ꢂ1

0.955 0.015

1.25 0.062

[ꢂ1.75 1.575ꢁ

[6.ꢂ5 0.787ꢁ [24.26 0.ꢂ81ꢁ

typ.

0.ꢂ12 0.0ꢂ1

[7.92 0.787ꢁ

ꢂ.875 0.010

[98.42 0.254ꢁ

7.0 0.09ꢂ [177.80 2.ꢂ6ꢁ

Revision: 30-Aug-12

Document Number: 31806

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TMC

Vishay Huntington

www.vishay.com

POWER RATING

Vishay TMC resistor wattage ratings are based on mounting to the following heat sink:

TMC005 and TMC010: 4" x 6" x 2" x 0.040" thick aluminum chassis (129 sq. in. surface area)

TMC025:

TMC050:

5" x 7" x 2" x 0.040" thick aluminum chassis (167 sq. in. surface area)

12" x 12" x 0.059" thick aluminum panel (291 sq. in. surface area)

TMC100 and TMC250: 12" x 12" x 0.125" thick aluminum panel (294 sq. in. surface area)

FREE AIR POWER RATING

GLOBAL

MODEL

TMC005

TMC005…NI

TMC010

TMC010…NI

TMC025

TMC025…NI

TMC050

TMC050…NI

TMC100

TMC100…NI

TMC250

TMC250…NI

W at 25 °C

4.5

7.5

12.5

100

AMBIENT TEMPERATURE DERATING

Derating is required for ambient temperatures above 25 °C, see the following graph.

Curves A, B, C apply to operation of unmounted resistors. Curve D applies to all types when mounted to specified heat sink.

A = TMC005 and TMC010 size resistor, unmounted

B = TMC025 size resistor, unmounted

C = TMC050, TMC100 and TMC250 size resistor, unmounted

D = All types mounted to recommended aluminum heat sink

120

100

- 55- 50

150

250

AMBIENT TEMPERATURE IN °C

REDUCED HEAT SINK DERATING

Derating is also required when recommended heat sink area is reduced.

A = TMC005 and TMC010 size resistor

B = TMC025 size resistor

C = TMC050, TMC100 and TMC250 size resistor

100

ꢀ OF RECOMMENDED HEAT SINK AREA

Revision: 30-Aug-12

Document Number: 31806

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TMC

Vishay Huntington

www.vishay.com

MATERIAL SPECIFICATIONS

TMC NON-INDUCTIVE

Element: Copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

Models of equivalent physical and electrical specifications

are available with non-inductive (Ayrton-Perry) winding.

They are identified by model number with special

(TMC005…NI, for example).

Core: Ceramic, steatite or alumina, depending on physical

size

Encapsulant: Silicone molded construction

Housing: Aluminum with hard anodic coating

End Caps: Stainless steel

SPECIAL MODIFICATIONS

A number of special modifications to the aluminum housed

resistor style are available upon request. Special

modifications include:

Standard Terminals: For TMC005 through TMC050 size

terminal finish - Lead (Pb)-free is Ni/Pd/Au, finish is on

copper clad steel core terminal. For TMC100 and TMC250

terminals are threaded stainless steel.

• Terminal configurations and materials

• Resistance values and tolerances

• Low resistance temperature coefficient (RTC)

• Housing configuration

Part Marking: HEI, model, wattage, value, tolerance, date

code

• Threaded mounting holes

• Preconditioning and other additional testing

PERFORMANCE

TEST

CONDITIONS OF TEST

Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C

TEST LIMITS

Thermal Shock

Short Time Overload

(0.5 % + 0.05 ) R

5 x rated power for 5 s

Dielectric Withstanding

Voltage

1000 V_rmsTMC005, TMC010 and TMC025; 2000 Vrms for TMC050;

4500 V_rmsfor TMC100 and TMC250; duration 1 min

(0.2 % + 0.05 ) R

High Temperature Storage

Moisture Resistance

Shock, Specified Pulse

Vibration, High Frequency

Load Life

250 °C for 2 h

(0.5 % + 0.05 ) R

(1.0 % + 0.05 ) R

(0.2 % + 0.05 ) R

(1.0 % + 0.05 ) R

(0.2 % + 0.05 ) R

MIL-STD-202 Method 106, 7b not applicable

MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks

Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each

1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

30 s, 5 pound pull test for TMC005 and TMC010, 10 pound pull test for other sizes

Terminal Strength

Revision: 30-Aug-12

Document Number: 31806

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

TMC100130R0HE01 [VISHAY]

相关型号：

TMC10015R00JE01

TMC1001K540FE01

TMC1001R330FE01

TMC100210R0FE01

TMC10024R90FE01

TMC100255R0FE01

TMC100255R0FE01NI

TMC1002K200JE01

TMC1002R610FE01

TMC100A

TMC100R0510HE01

TMC100R0510HE01NI