T16D227M100CHUS [VISHAY]
Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case;型号: | T16D227M100CHUS |
厂家: | VISHAY |
描述: | Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case |
文件: | 总5页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T16
Vishay
www.vishay.com
Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case
with Glass-to-Tantalum Hermetic Seal for -55 °C to +125 °C
FEATURES
• Enhanced performance, high reliability design
•
Terminations: axial, standard tin / lead (Sn / Pb),
100 ꢀ tin (RoHS-compliant) available
Available
Available
• Model
T16
tantalum-case
electrolytic
capacitors provide all the advantages of
Vishay’s SuperTan® series devices, while
offering improved reverse voltage and
vibration capability
Available
• Increased thermal shock capability of
300 cycles
• Designed for the avionics and aerospace applications
PERFORMANCE CHARACTERISTICS
Refer to: Typical Performance Characteristics
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Note
Capacitance Tolerance: 10 ꢀ, 20 ꢀ standard
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings table.
ORDERING INFORMATION
T16
D
227
M
100
E
Z
S
S
MODEL CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING TERMINATION
RELIABILITY /
SHOCK /
VIBRATION LEVEL
INSULATING
SLEEVE
ESR
CODE
TOLERANCE
AT +85 °C
AND PACKAGING
See
Ratings
and
This is expressed
in picofarads.
The first two
digits are the
significant
K = 10 ꢀ
M = 20 ꢀ
This is expressed in E = tin / lead, bulk,
Z = standard
H = high
S = sleeved
S =
volts. To complete
standard
U = unsleeved standard
the three-digit block, C = 100 ꢀ tin, bulk
zeros precede the
Case
Codes
Table. figures. The third
is the number of
voltage rating.
zeros to follow.
Note
•
Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight
DIMENSIONS in inches [millimeters]
D
E
L1
E
0.0253 0.002 [0.64 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
Weld
Tantalum
L2
CASE CODE
L2
(max.)
WEIGHT (g)
(max.)
D
L1
E
TYPE T16
ST
0.188 0.016
[4.78 0.41]
0.281 0.016
[7.14 0.41]
0.281 0.016
[7.14 0.41]
0.375 0.016
[9.52 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
1.008 + 0.031 / - 0.016
[25.60 + 0.79 / - 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.500 0.250
[38.10 6.35]
2.250 0.250
[57.15 6.35]
2.250
[57.15]
2.250 0.250
[57.15 6.35]
A
T1
0.734 [18.64]
2.6
6.2
B
E
T2
L2
T3
T4
0.922 [23.42]
1.171 [29.75]
1.047 [26.59]
1.343 [34.11]
7.84
11.6
17.7
C
D
0.375 0.016
[9.52 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
2.250 0.250
[57.15 6.35]
Note
•
For insulated parts, add 0.015" [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body
Revision: 06-Jul-2020
Document Number: 40139
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T16
Vishay
www.vishay.com
STANDARD RATINGS
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%)
AC
CAPACITANCE
AT +25 °C
120 Hz
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
RIPPLE
+85 °C
40 kHz
CASE
CODE
PART NUMBER
+85 °C
120 Hz
120 Hz
+25 °C
AND
-55 °C +85 °C +125 °C
(μF)
(Ω)
(Ω)
(mARMS
)
+125 °C
25 VDC AT 85 °C, 15 VDC AT 125 °C
120
560
1100
1200
1800
A
B
E
C
D
T16A127(1)025(2)(3)(4)(5)
T16B567(1)025(2)(3)(4)(5)
T16E118(1)025(2)(3)(4)(5)
T16C128(1)025(2)(3)(4)(5)
T16D188(1)025(2)(3)(4)(5)
1.30
0.83
0.50
0.65
0.50
25
12
7
1
2
3
5
6
5
-42
-65
-60
-70
-72
8
12
18
45
20
20
1250
2000
3200
2400
3000
10
25
20
25
14
20
15
15
7
7
30 VDC AT 85 °C, 20 VDC AT 125 °C
100
470
950
1000
1500
A
B
E
C
D
T16A107(1)030(2)(3)(4)(5)
T16B477(1)030(2)(3)(4)(5)
T16E957(1)030(2)(3)(4)(5)
T16C108(1)030(2)(3)(4)(5)
T16D158(1)030(2)(3)(4)(5)
1.30
0.85
0.50
0.70
0.60
25
15
7
1
2
5
5
-38
-65
-55
-70
-72
8
12
18
35
25
25
1200
1800
3200
2200
2900
10
30
25
35
14
18
15
15
7
7
6
12
50 VDC AT 85 °C, 30 VDC AT 125 °C
68
A
B
E
C
D
T16A686(1)050(2)(3)(4)(5)
T16B227(1)050(2)(3)(4)(5)
T16E457(1)050(2)(3)(4)(5)
T16C477(1)050(2)(3)(4)(5)
T16D687(1)050(2)(3)(4)(5)
1.50
0.90
0.60
0.75
0.70
35
17.5
9
10
8
1
2
3
3
5
5
-25
-50
-45
-45
-58
8
8
12
8
15
15
30
15
20
1050
1800
2900
2100
2700
220
450
470
680
10
25
25
40
10
60 VDC AT 85 °C, 40 VDC AT 125 °C
47
A
B
E
C
D
T16A476(1)060(2)(3)(4)(5)
T16B157(1)060(2)(3)(4)(5)
T16E377(1)060(2)(3)(4)(5)
T16C397(1)060(2)(3)(4)(5)
T16D567(1)060(2)(3)(4)(5)
2.00
1.10
0.60
0.90
0.80
44
20
9
15
10
1
2
3
3
5
5
-25
-40
-33
-45
-58
8
8
9
8
8
12
15
20
15
15
1050
1800
2900
2100
2700
150
370
390
560
10
25
25
40
75 VDC AT 85 °C, 50 VDC AT 125 °C
33
A
B
E
E
C
D
T16A336(1)075(2)(3)(4)(5)
T16B117(1)075(2)(3)(4)(5)
T16E227(1)075(2)(3)(4)(5)
T16E257(1)075(2)(3)(4)(5)
T16C337(1)075(2)(3)(4)(5)
T16D477(1)075(2)(3)(4)(5)
2.50
1.30
0.80
0.80
1.00
0.90
66
24
12
12
12
12
1
2
5
5
3
5
5
-25
-35
-30
-30
-45
-50
5
6
6
6
6
6
9
1050
1650
2500
2500
2100
2700
110
220
250
330
470
10
30
30
30
50
10
15
15
10
10
100 VDC AT 85 °C, 65 VDC AT 125 °C
15
68
120
150
220
A
B
E
T16A156(1)100(2)(3)(4)(5)
T16B686(1)100(2)(3)(4)(5)
T16E127(1)100(2)(3)(4)(5)
T16C157(1)100(2)(3)(4)(5)
T16D227(1)100(2)(3)(4)(5)
3.50
2.10
1.00
1.60
1.20
125
37
20.5
22
1
2
3
3
5
5
-18
-30
-30
-35
-40
3
4
4
6
6
10
12
12
12
12
1050
1650
2200
2100
2700
10
25
25
50
C
D
15
125 VDC AT 85 °C, 85 VDC AT 125 °C
10
47
A
B
C
E
C
D
T16A106(1)125(2)(3)(4)(5)
T16B476(1)125(2)(3)(4)(5)
T16C826(1)125(2)(3)(4)(5)
T16E906(1)125(2)(3)(4)(5)
T16C107(1)125(2)(3)(4)(5)
T16D157(1)125(2)(3)(4)(5)
5.50
2.30
1.80
1.30
1.80
1.60
175
47
40
25
35
20
1
2
3
5
3
5
5
-15
-25
-35
-25
-35
-35
3
5
5
4
5
6
10
12
12
15
12
12
1050
1650
1950
2000
2100
2700
10
25
25
25
50
82
90
100
150
Note
•
Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination / packaging: C = 100 ꢀ tin, bulk; E = standard, tin / lead, bulk
(3) Reliability level: Z = standard (non-ER / 500 g / 50 g / 53.79 g); H = high (non-ER / 500 g / 80 g / 53.79 g)
(4) Insulating sleeve: S = sleeved; U = unsleeved
(5) ESR: S = standard
Revision: 06-Jul-2020
Document Number: 40139
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T16
Vishay
www.vishay.com
TYPICAL PERFORMANCE CHARACTERISTICS OF T16 CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
-55 °C to +85 °C (to +125 °C with voltage derating)
20 ꢀ, 10 ꢀ at 120 Hz, at +25 °C
Operating temperature range
Capacitor tolerance
Capacitor change by temperature
ESR
Limit per Standard Ratings table
Limit per Standard Ratings table, at +25 °C, 120 Hz
Limit per Standard Ratings table, at -55 °C, 120 Hz
Limit per Standard Ratings table
Impedance
DCL (leakage current)
AC ripple current
Reverse voltage
Surge voltage
Limit per Standard Ratings table, at +85 °C and 40 kHz
Reverse voltage shall be in accordance with MIL-PRF-39006, paragraphs 3.23 and 4.8.19.
Surge voltage shall be in accordance with MIL-PRF-39006 and Table II of DLA 13017.
The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under
any conditions including transients and peak ripple at the highest line voltage.
The DC surge voltage is 115 ꢀ of rated DC voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage shall not exceed the specified value in catalog
b) Capacitance shall be within +5 ꢀ, -20 ꢀ of initial value
c) ESR shall not exceed the specified value in catalog
PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Life testing
Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 °C at rated
voltage, or a 2000 h life test at 125 °C test at derated voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage at 85 °C and 125 °C shall not exceed 125 ꢀ of the specified value
b) DC leakage at 25 °C shall not exceed the specified value
c) Capacitance shall be within +10 ꢀ, -20 ꢀ of initial value
d) ESR shall not exceed 200 ꢀ of the specified value
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Seal
MIL-PRF-39006
When the capacitors are tested as specified in MIL-PRF-39006,
there shall be no evidence of leakage.
Moisture resistance
MIL-PRF-39006
Moisture resistance shall be in accordance with MIL-PRF-39006.
Number of cycles: 10 continuous cycles
Barometric pressure
(reduced)
MIL-STD-202, method 105, condition E
Altitude 150 000 feet
Revision: 06-Jul-2020
Document Number: 40139
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T16
Vishay
www.vishay.com
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Shock (specified pulse)
MIL-STD-202, method 213,
The capacitors shall meet the requirements of MIL-PRF-39006.
codes Z and H = test condition D (500 g)
Vibration, high frequency
MIL-STD-202, method 204,
The capacitors shall meet the requirements of MIL-PRF-39006.
code Z = test condition E (50 g peak)
code H = test condition H (80 g peak)
MIL-STD-202, method 214,
test condition II-K (53.79 g RMS)
Random vibration
Thermal shock
The capacitors shall meet the requirements of MIL-PRF-39006.
MIL-STD-202, method 107, condition A
Thermal shock shall be in accordance with MIL-PRF-39006 when
tested for 300 cycles.
Solderability
MIL-STD-202, method 208,
ANSI/J-STD-002, test A
Solderability shall be in accordance with MIL-PRF-39006.
Terminal strength
MIL-STD-202, method 211
Terminal strength shall be in accordance with MIL-PRF-39006.
The capacitors shall meet the requirements of MIL-PRF-39006.
Resistance to solder heat
Terminals
MIL-STD-202, method 210, condition C
MIL-STD-1276
Terminals shall be as specified in MIL-STD-1276. The length and
diameter of the terminals shall be as specified in Dimensions table.
All terminals shall be permanently secured internally and
externally, as applicable. All external joints shall be welded.
Marking
MIL-STD-1285
Marking of capacitors conforms to method I of MIL-STD-1285 and
include capacitance (in μF), capacitance tolerance letter, rated
voltage, date code, lot symbol and Vishay trademark.
SELECTOR GUIDES
Tantalum Selector Guide
Parameter Comparison Guide
www.vishay.com/doc?49054
www.vishay.com/doc?42088
Revision: 06-Jul-2020
Document Number: 40139
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明