SX073H045A4OT [VISHAY]
DIODE RECTIFIER DIODE, Rectifier Diode;
| 型号： | SX073H045A4OT |
| 厂家： | 
VISHAY |
| 描述： | DIODE RECTIFIER DIODE, Rectifier Diode 二极管 |
| 文件： | 总3页 (文件大小：204K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
New Product
SX...H045.4.. Series
Vishay General Semiconductor
Schottky Bare Die
FEATURES
a
c
e
• Planar Schottky (VBRM = 45 V)
• Low forward voltage drop
• High frequency operation
CIRCUIT DIAGRAM
d
b
C (2)
A (1)
C (2)
A (1)
Notes
(1)
Front metallization side: Anode
Back metallization side: Cathode
(2)
MECHANICAL DATA
DIMENSIONS in inches (millimeters)
TYPICAL TOTAL METAL THICKNESS
BONDABLE/
SOLDERABLE
CHIP
THICKNESS
CHIP SIZE
a, b
FRONT SIDE A
BACK SIDE C
DEVICE (1)
ASSEMBLY
c, d
e
METAL THICKNESS METAL THICKNESS
min.
0.071
max.
min.
max.
min.
max.
0.073
0.067
0.069
0.010
0.012
SX073H045A4OT
SX073H045S4PT
SX085H045S4PU
SX110H045A4OU
SX110H045S4PU
Bondable
Solderable
Solderable
Bondable
Solderable
Ti/Ni/Al
Ti/Ni/Ag
Ti/Ni/Ag
Ti/Ni/Al
Ti/Ni/Ag
4.4 μm
5.4 μm
5.4 μm
4.4 μm
5.4 μm
Ti/Ni/Ag
Ti/Ni/Ag
Ti/Ni/Ag
Ti/Ni/Ag
Ti/Ni/Ag
3.3 μm
3.3 μm
3.3 μm
3.3 μm
3.3 μm
(1.803) (1.854) (1.702) (1.753) (0.254) (0.305)
0.071 0.073 0.067 0.069 0.010 0.012
(1.803) (1.854) (1.702) (1.753) (0.254) (0.305)
0.083 0.085 0.079 0.081 0.010 0.012
(2.108) (2.159) (2.007) (2.057) (0.254) (0.305)
0.108 0.110 0.104 0.106 0.010 0.012
(2.743) (2.794) (2.642) (2.692) (0.254) (0.305)
0.108 0.110 0.104 0.106 0.010 0.012
(2.743) (2.794) (2.642) (2.692) (0.254) (0.305)
Note
(1)
Refer to Device Code definition
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BARE DIE
FINISH GOOD (for reference not guarantee for bare die)
MAXIMUM
MINIMUM
MAXIMUM
REVERSE
CURRENT
RM AT VBRM
(μA)
OPERATING
JUNCTION
TEMPERATURE
RANGE
FORWARD DROP
VOLTAGE (1)
VF AT IF
BREAKDOWN
VOLTAGE
VBRM (2) (V)
DEVICE
EQUIVALENT
PRODUCT (3)
PACKAGE
STYLE
(2)
I
AT IR = 1 mA
(V)
(A)
7.5
7.5
10
SX073H045A4OT
SX073H045S4PT
SX085H045S4PU
SX110H045A4OU
SX110H045S4PU
45
45
45
45
45
50
50
0.63
0.63
0.63
0.62
0.62
- 65 °C to + 175 °C
- 65 °C to + 175 °C
- 65 °C to + 175 °C
- 65 °C to + 175 °C
- 65 °C to + 175 °C
MBR15H45CT
MBR15H45CT
MBRF20H45CT
MBR30H45CT
MBR30H45CT
TO-220AB
TO-220AB
ITO-220AB
TO-220AB
TO-220AB
100
80
15
80
15
Notes
(1)
Pulse test: 300 μs pulse width
Pulse test: Pulse width ≤ 40 ms
(2)
(3)
Package equivalent product quality level information will provide per customer request but only for reference no guarantee bare die can meet
the same
Document Number: 89211
Revision: 10-Jun-10
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
New Product
SX...H045.4.. Series
Vishay General Semiconductor
PACKAGING
DEVICE
PACKAGE CODE
DELIVERY MODE
BASE QUANTITY
SX073H045A4.T
SX085H045S4PU
SX110H045A4.U
T
U
U
12 mm tape/4 mm pitch, 7" diameter plastic tape and reel
12 mm tape/4 mm pitch, 7" diameter plastic tape and reel
12 mm tape/4 mm pitch, 7" diameter plastic tape and reel
6000
6000
6000
DEVICE CODE
SX 073
H
045
A
4
P
T
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
Planar Schottky Die
Die dimensions in mils
Process (for Schottky)
R = TJ max. 125 °C
S = TJ max. 150 °C
H = TJ max. 175 °C
Voltage code: Code = VBRM
A = Bondable
S = Solderable
Chip surface metallization (see Mechanical Data table)
Wafer diameter in inches
4 = 4" wafer
6 = 6" wafer
P = Packaged die, high reliability grade (1)
O = Packaged die, commercial grade (1)
N = Non packaged die (2)
Quality level code
Packaging (see Packaging table)
Notes
(1)
Packaged die
• Existing die in qualified package
Non packaged die
(2)
• Existing fab. process
• Non standard die metal
• Die metal has been qualified
• No production in packaged form
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89211
Revision: 10-Jun-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明