SMCG78A-E3 [VISHAY]
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, PLASTIC, SMCG, 2 PIN, Transient Suppressor;![SMCG78A-E3](http://pdffile.icpdf.com/pdf2/p00279/img/icpdf/SMCG110A-E3_1668847_icpdf.jpg)
型号: | SMCG78A-E3 |
厂家: | ![]() |
描述: | DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, PLASTIC, SMCG, 2 PIN, Transient Suppressor 局域网 光电二极管 电视 |
文件: | 总5页 (文件大小:87K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Supressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-215AB (SMCG)
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLCIATIONS
VWM
PPPM
PD
5.0 V to 188 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
1500 W
6.5 W
IFSM
200 A
TJ max.
150 °C
MECHANICAL DATA
Case: DO-215AB (SMCG)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. SMCG188CA).
Electrical characteristics apply in both directions.
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
M3 suffix meets JESD 201 class 1A whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)(2)
Peak pulse power dissipation with a 10/1000 μs waveform
Peak pulse current with a 10/1000 μs waveform
PPPM
(1)
IPPM
See next table
6.5
A
Power dissipation on infinite heatsink TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave uni-directional only
Operating junction and storage temperature range
PD
W
(2)
IFSM
200
A
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 14-Mar-12
Document Number: 89428
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE
MARKING
CODE
BREAKDOWN
VOLTAGE
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
PEAK
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICE TYPE
MODIFIED
GULL WING
V
BR AT IT (V) (1)
PULSE
CURRENT
I
(mA)
(V)
UNI
BI
MIN.
MAX.
ID (μA) (3)
PPM (A) (2)
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
10.3
9.3
VC (V)
(+)SMCG5.0A (5)
(+)SMCG6.0A
(+)SMCG6.5A
(+)SMCG7.0A
(+)SMCG7.5A
(+)SMCG8.0A
(+)SMCG8.5A
(+)SMCG9.0A
(+)SMCG10A
(+)SMCG11A
(+)SMCG12A
(+)SMCG13A
(+)SMCG14A
(+)SMCG15A
(+)SMCG16A
(+)SMCG17A
(+)SMCG18A
(+)SMCG20A
(+)SMCG22A
(+)SMCG24A
(+)SMCG26A
(+)SMCG28A
(+)SMCG30A
(+)SMCG33A
(+)SMCG36A
(+)SMCG40A
(+)SMCG43A
(+)SMCG45A
(+)SMCG48A
(+)SMCG51A
(+)SMCG54A
(+)SMCG58A
(+)SMCG60A
(+)SMCG64A
(+)SMCG70A
(+)SMCG75A
(+)SMCG78A
(+)SMCG85A
(+)SMCG90A
(+)SMCG100A
(+)SMCG110A
(+)SMCG120A
(+)SMCG130A
(+)SMCG150A
(+)SMCG160A
(+)SMCG170A
SMCG188A
GDE GDE
GDG GDG
GDK BDK
GDM GDM
GDP BDP
GDR BDR
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
1000
1000
500
200
100
50
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93
GDT
GDV
GDX
BDT
BDV
BDX
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
GDZ GDZ
GEE BEE
GEG GEG
GEK BEK
GEM BEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GEP
GER
BET
BEV
BEX
BEZ
BFE
GFG BFG
GFK BFK
GFM BFM
GFP
GFR
GFT
GFV
GFX
GFZ
BFP
BFR
BFT
GFV
GFX
GFZ
GGE GGE
GGG GGG
GGK GGK
GGM GGM
GGP GGP
GGR GGR
GGT GGT
GGV GGV
GGX GGX
GGZ GGZ
GHE GHE
GHG GHG
GHK GHK
GHM GHM
GHP GHP
GHR GHR
GHS GHS
96
103
113
121
126
137
146
162
177
193
209
243
259
275
328
85
90
111
123
135
147
159
185
197
209
111
122
133
144
167
178
189
209
100
110
120
130
150
160
170
188
8.5
7.8
7.2
6.2
5.8
5.5
4.6
231
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(+)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
For bi-directional types having VWM of 10 V and less, the ID limit is doubled
All terms and symbols are consistent with ANSI/IEEE CA62.35
For the bi-directional SMCG5.0CA, the maximum VBR is 7.25 V
VF = 3.5 V at IF = 100 A (uni-directional only)
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 14-Mar-12
Document Number: 89428
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
75
UNIT
°C/W
°C/W
(1)
Typical thermal resistance, junction to ambient
Typical thermal resistance, junction to lead
RJA
RJL
15
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
SMCG5.0A-M3/57T
SMCG5.0A-M3/9AT
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
0.211
0.211
57T
9AT
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
3500
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
10
1
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPPM
IPP
2
10/1000 µs Waveform
as defined by R.E.A.
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
td - Pulse Width (s)
t - Time (ms)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
20 000
10 000
Measured at
Zero Bias
75
50
25
1000
100
10
VR, Measured at
Stand-Off
Voltage VWM
Uni-Directional
Bi-Directional
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0
0
25
50
75
100 125
150 175
200
1
10
100
400
TJ - Initial Temperature (°C)
VWM - Reverse Stand-Off Voltage (V)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance Uni-Directional
Revision: 14-Mar-12
Document Number: 89428
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
100
200
100
10
1.0
0.1
TJ = TJ max.
8.3 ms Single Half Sine-Wave
10
0.001
0.01
0.1
1
10
100
1000
1
10
100
tp - Pulse Duration (s)
Number of Cycles at 60 Hz
Fig. 5 - Typical Transient Thermal Impedance
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Uni-Directional Use Only
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-215AB (SMCG)
Mounting Pad Layout
Cathode Band
0.310 (7.87)
0.245 (6.22)
0.220 (5.59)
0.125 (3.17)
0.115 (2.92)
0.125 (3.17)
0.050 (1.27)
0.280 (7.11)
0.260 (6.60)
0.008 (0.20)
0.002 (0.05)
0.016 (0.41)
0.006 (0.15)
0.095 (2.41)
0.075 (1.90)
0.058 (1.47)
0.038 (0.97)
0.040 (1.02)
0.024 (0.61)
0.020
(0.51) Max.
0.400 (10.16)
0.380 (9.64)
Seating Plane
Revision: 14-Mar-12
Document Number: 89428
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00217/img/page/SMCG40CA-51-_1244211_files/SMCG40CA-51-_1244211_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00217/img/page/SMCG40CA-51-_1244211_files/SMCG40CA-51-_1244211_2.jpg)
SMCG78A-E3/51
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_2.jpg)
SMCG78A-E3/57T
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_2.jpg)
SMCG78A-E3/9AT
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG26-HE3-5_1581381_files/SMCG26-HE3-5_1581381_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG26-HE3-5_1581381_files/SMCG26-HE3-5_1581381_2.jpg)
SMCG78A-HE3/57T
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG26-HE3-5_1581381_files/SMCG26-HE3-5_1581381_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG26-HE3-5_1581381_files/SMCG26-HE3-5_1581381_2.jpg)
SMCG78A-HE3/9AT
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00341/img/page/SMCG75A-HR_2101244_files/SMCG75A-HR_2101244_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00341/img/page/SMCG75A-HR_2101244_files/SMCG75A-HR_2101244_2.jpg)
SMCG78A-HR
The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
LITTELFUSE
![](http://pdffile.icpdf.com/pdf2/p00253/img/page/SMCG6-0-E3-5_1532056_files/SMCG6-0-E3-5_1532056_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00253/img/page/SMCG6-0-E3-5_1532056_files/SMCG6-0-E3-5_1532056_2.jpg)
SMCG78A/51
Trans Voltage Suppressor Diode, 1500W, 78V V(RWM), Bidirectional, 1 Element, Silicon, DO-215AB, PLASTIC, SMCG, 2 PIN
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00217/img/page/SMCG40CA-51-_1244211_files/SMCG40CA-51-_1244211_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00217/img/page/SMCG40CA-51-_1244211_files/SMCG40CA-51-_1244211_2.jpg)
SMCG78A/51-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00294/img/page/SMCJ33E3_1782538_files/SMCJ33E3_1782538_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00294/img/page/SMCJ33E3_1782538_files/SMCJ33E3_1782538_2.jpg)
SMCG78AE3
Trans Voltage Suppressor Diode, 1500W, 78V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AB, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
![](http://pdffile.icpdf.com/pdf2/p00255/img/page/SMCJ43CE3-TR_1542592_files/SMCJ43CE3-TR_1542592_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00255/img/page/SMCJ43CE3-TR_1542592_files/SMCJ43CE3-TR_1542592_2.jpg)
SMCG78AE3/TR
Trans Voltage Suppressor Diode, 1500W, 78V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN
MICROSEMI
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMCG6-0AHE3-_1580455_files/SMCG6-0AHE3-_1580455_2.jpg)
SMCG78AHE3/57T
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明