SMCG58AHE3/57T [VISHAY]
TVS DIODE 58V 93V DO215AB;
| 型号： | SMCG58AHE3/57T |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 58V 93V DO215AB 电视 |
| 文件： | 总5页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
SMCG (DO-215AB)
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VBR uni-directional
6.40 V to 231 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VBR bi-directional
6.40 V to 231 V
5.0 V to 188 V
1500 W
VWM
PPPM
PD
6.5 W
MECHANICAL DATA
IFSM (uni-directional only)
200 A
Case: SMCG (DO-215AB)
Molding compound meets UL 94 V-0 flammability rating
TJ max.
150 °C
Base P/N-E3
-
RoHS compliant, industrial grade
Polarity
Uni-directional, bi-directional
SMCG (DO-215AB)
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Package
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. SMCG188CA).
Electrical characteristics apply in both directions.
Polarity: for uni-directional types the band denotes cathode
end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Power dissipation on infinite heatsink, TA = 50 °C
IPPM
See next table
200
A
IFSM
A
PD
6.5
W
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 16-Jan-18
Document Number: 88457
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
MAXIMUM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICEMARKING
CODE
VOLTAGE
DEVICE TYPE
MODIFIED
GULL WING
PEAK PULSE CLAMPING
(1)
V
BR AT IT
(V)
SURGE
VOLTAGEAT
IPPM
CURRENT
(mA)
(V)
ID (μA) (3)
I
PPM (A) (2)
VC (V)
UNI
BI
MIN.
MAX.
(+)SMCG5.0A (5)
(+)SMCG6.0A
(+)SMCG6.5A
(+)SMCG7.0A
(+)SMCG7.5A
(+)SMCG8.0A
(+)SMCG8.5A
(+)SMCG9.0A
(+)SMCG10A
(+)SMCG11A
(+)SMCG12A
(+)SMCG13A
(+)SMCG14A
(+)SMCG15A
(+)SMCG16A
(+)SMCG17A
(+)SMCG18A
(+)SMCG20A
(+)SMCG22A
(+)SMCG24A
(+)SMCG26A
(+)SMCG28A
(+)SMCG30A
(+)SMCG33A
(+)SMCG36A
(+)SMCG40A
(+)SMCG43A
(+)SMCG45A
(+)SMCG48A
(+)SMCG51A
(+)SMCG54A
(+)SMCG58A
(+)SMCG60A
(+)SMCG64A
(+)SMCG70A
(+)SMCG75A
(+)SMCG78A
(+)SMCG85A
(+)SMCG90A
(+)SMCG100A
(+)SMCG110A
(+)SMCG120A
(+)SMCG130A
(+)SMCG150A
(+)SMCG160A
(+)SMCG170A
SMCG188A
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
GFR
GFT
GFV
GFX
GFZ
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHP
GHR
GHS
GDE
GDG
BDK
GDM
BDP
BDR
BDT
BDV
BDX
GDZ
BEE
GEG
BEK
BEM
GEP
GER
BET
BEV
BEX
BEZ
BFE
BFG
BFK
BFM
BFP
BFR
BFT
GFV
GFX
GFZ
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHP
GHR
GHS
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
10
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
1000
1000
500
200
100
50
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
10.3
9.3
9.20
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
96
103
113
121
126
137
146
162
177
193
209
243
259
275
328
85
90
111
123
135
147
159
185
197
209
111
122
133
144
167
178
189
209
100
110
120
130
150
160
170
188
8.5
7.8
7.2
6.2
5.8
5.5
4.6
231
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(+)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
For bi-directional types having VWM of 10 V and less, the ID limit is doubled
All terms and symbols are consistent with ANSI/IEEE C62.35
For the bi-directional SMCG5.0CA, the maximum VBR is 7.25 V
VF = 3.5 V at IF = 100 A (uni-directional only)
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 16-Jan-18
Document Number: 88457
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient (1)
SYMBOL
VALUE
75
UNIT
RJA
°C/ W
Typical thermal resistance, junction to lead
RJL
15
Note
(1)
Measured on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMCG5.0A-E3/57T
SMCG5.0A-E3/9AT
SMCG5.0AHE3/57T (1)
SMCG5.0AHE3/9AT (1)
0.211
0.211
0.211
0.211
57T
9AT
57T
9AT
850
3500
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
3500
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPP
2
IPPM
10/1000 µs Waveform
as defined by R.E.A.
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
td - Pulse Width (s)
t - Time (ms)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
75
20 000
10 000
Measured at
Zero Bias
1000
100
10
VR, Measured at
Stand-Off
Voltage VWM
50
25
Uni-Directional
Bi-Directional
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0
0
25
50
75
100 125
150 175
200
1
10
100
400
TJ - Initial Temperature (°C)
VWM - Reverse Stand-Off Voltage (V)
Fig. 4 - Typical Junction Capacitance Uni-Directional
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Revision: 16-Jan-18
Document Number: 88457
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
100
200
100
10
1.0
0.1
TJ = TJ max.
8.3 ms Single Half Sine-Wave
10
0.001
0.01
0.1
1
10
100
1000
1
10
100
tp - Pulse Duration (s)
Number of Cycles at 60 Hz
Fig. 5 - Typical Transient Thermal Impedance
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current
Uni-Directional Use Only
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMCG (DO-215AB)
Mounting Pad Layout
Cathode Band
0.310 (7.87)
0.245 (6.22)
0.220 (5.59)
0.125 (3.17)
0.115 (2.92)
0.125 (3.17)
0.050 (1.27)
0.280 (7.11)
0.260 (6.60)
0.008 (0.20)
0.002 (0.05)
0.016 (0.41)
0.006 (0.15)
0.095 (2.41)
0.075 (1.90)
0.058 (1.47)
0.038 (0.97)
0.040 (1.02)
0.024 (0.61)
0.020
(0.51) Max.
0.400 (10.16)
0.380 (9.64)
Seating Plane
Revision: 16-Jan-18
Document Number: 88457
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SMCG58C-E3/51
Trans Voltage Suppressor Diode, 1500W, 58V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AB, PLASTIC, SMCG, 2 PIN
VISHAY
SMCG58C/9AT
Trans Voltage Suppressor Diode, 1500W, 58V V(RWM), Unidirectional, 1 Element, Silicon, DO-215AB, PLASTIC, SMCG, 2 PIN
VISHAY
SMCG58CA-E3/51
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
SMCG58CA-E3/57T
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
SMCG58CA-HE3/57T
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
SMCG58CA-HE3/9AT
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-215AB, ROHS COMPLIANT, PLASTIC, SMCG, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明