SMA6J20A-M3/5A [VISHAY]
Trans Voltage Suppressor Diode, 600W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN;型号: | SMA6J20A-M3/5A |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 600W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN 局域网 光电二极管 |
文件: | 总5页 (文件大小:85K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMA6J5.0A thru SMA6J28A
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Available in uni-directional polarity only
• Excellent clamping capability
• AEC-Q101 qualified
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DO-214AC (SMA)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 28 V
MECHANICAL DATA
VBR
6.4 V to 34.4 V
600 W
Case: DO-214AC (SMA)
P
PPM (10 x 1000 μs)
Molding compound meets UL 94 V-0 flammability rating
P
PPM (8 x 20 μs)
4000 W
Base P/N-M3
commercial grade
Base P/NHM3
AEC-Q101 qualified
-
halogen-free, RoHS-compliant, and
PD at TA = 50 °C
4 W
-
halogen-free, RoHS-compliant, and
IFSM
50 A
TJ max.
150 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
Polarity
Uni-directional
DO-214AC (SMA)
Package
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
600
UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
Peak pulse power dissipation with a 8/20 μs waveform
Peak pulse current with a 10/1000 μs waveform (1)(2)
PPPM
W
4000
IPPM
See next table
A
Peak pulse current with a 8/20 μs waveform
Power dissipation on infinite heatsink, TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave
Operating junction and storage temperature range
PD
IFSM
4.0
50
W
A
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 1 and derated above TA = 25 °C per fig. 2.
Mounted on PCB with 5.0 mm x 5.0 mm copper pads attached to each terminal
(2)
Revision: 13-May-14
Document Number: 89460
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA6J5.0A thru SMA6J28A
www.vishay.com
Vishay General Semiconductor
I
INDEX OF SYMBOLS
IF
SYMBOL
VWM
VBR
VC
PARAMETER
Stand-off voltage
Breakdown voltage
VWM
VBR
VC
Clamping voltage
ID
Leakage current at VWM
Peak pulse current
VF
V
ID
IT
IPP
T
Voltage temperature coefficient
Forward voltage drop
Dynamic resistance
VF
IPP
RD
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
(2)
(2)
BREAKDOWN
MAXIMUM
VC AT IPP
10/1000 μs
MAX.
RD
VC AT IPP
RD
VOLTAGE
REVERSE LEAKAGE
T (3)
DEVICE
MARKING
CODE
8/20 μs
(1)
DEVICE
TYPE
V
BR AT IT
ID AT VWM
MIN. MAX.
V
25 °C 85 °C
μA
MAX.
V
MAX.
10-4/°C
5.7
mA
10
10
10
1
V
V
A
A
SMA6J5.0A
SMA6J6.0A
SMA6J6.5A
SMA6J7.5A
SMA6J8.0A
SMA6J8.5A
SMA6J10A
SMA6J11A
SMA6J12A
SMA6J13A
SMA6J15A
SMA6J16A
SMA6J17A
SMA6J18A
SMA6J20A
SMA6J22A
SMA6J24A
SMA6J26A
SMA6J28A
6AE
6AG
6AK
6AP
6AR
6AT
6AX
6AZ
6BE
6BG
6BM
6BP
6BR
6BT
6BV
6BX
6BZ
6CE
6CG
6.4
7.07
7.41
7.96
9.21
9.83
10.4
12.3
13.5
14.7
15.9
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
150
600
100
50
375
1500
250
125
50
50
5
5.0
6.0
6.5
7.5
8.0
8.5
10
11
12
13
15
16
17
18
20
22
24
26
28
9.1
65.9
63.2
58.8
50.8
48.0
45.1
38.2
34.8
31.9
29.4
25.4
23.8
22.5
21.2
19.1
17.4
15.9
14.7
13.6
0.031
0.033
0.038
0.051
0.056
0.064
0.089
0.107
0.128
0.153
0.201
0.229
0.259
0.292
0.361
0.437
0.523
0.614
0.704
13.4
298
290
276
235
220
205
184
172
157
147
123
119
111
102
93
0.021
0.022
0.024
0.033
0.038
0.040
0.040
0.047
0.056
0.054
0.075
0.083
0.094
0.109
0.132
0.152
0.185
0.213
0.253
6.7
9.5
13.7
14.5
17.0
18.2
18.7
19.6
21.5
23.5
23.9
27.7
29.5
31.4
33.2
36.8
40.4
44.3
47.9
51.6
5.9
6.1
6.5
7.0
7.3
7.8
8.1
8.3
8.4
8.8
8.8
9.0
9.2
9.4
9.5
9.6
9.7
9.8
7.2
10.2
11.8
12.5
13.3
15.7
17.2
18.8
20.4
23.6
25.2
26.7
28.3
31.4
34.5
37.8
40.9
44.0
8.33
8.89
9.4
1
20
1
20
11.1
12.2
13.3
14.4
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
1
1
1
1
5
1
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
89
1
1
80
1
1
75
1
1
68
Notes
(1)
(2)
(3)
(4)
Pulse test: tp 50 ms
To calculate maximum clamping voltage at other surge currents, use the following formula: VCLmax. = RD x IPP + VBRmax.
To calculate VBR vs. junction temperature, use the following formula: VBR at TJ = VBR at 25 °C x (1 + T x (TJ - 25)
VF = 3.5 V at IF = 25 A, pulse test: 300 µs pulse width
Revision: 13-May-14
Document Number: 89460
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA6J5.0A thru SMA6J28A
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
120
UNIT
Typical thermal resistance, junction to ambient (1)
RJA
°C/ W
Typical thermal resistance, junction to lead
RJL
25
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMA6J5.0A-M3/61
SMA6J5.0A-M3/5A
SMA6J5.0AHM3/61 (1)
SMA6J5.0AHM3/5A (1)
0.064
0.064
0.064
0.064
61
5A
61
5A
1800
7500
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
150
100
50
tr = 10 µs
tr = 8 µs
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
IPPM
10
Half Value - IPP
IPPM
2
1
td = 1000 µs
td = 20 µs
td
0.1
0.1
0
1
10
100
1000
10 000
0
1.0
2.0
t - Time (ms)
3.0
4.0
Pulse Width (µs) - ½ IPP Exponential Waveform
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
10 000
1000
100
100
75
50
25
0
Measured at Zero Bias
Measured at Stand-off
Voltage VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
10
100
0
25
50
75 100 125 150 175 200
Reverse Voltage (V)
TJ - Initial Temperature
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance
Revision: 13-May-14
Document Number: 89460
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA6J5.0A thru SMA6J28A
www.vishay.com
Vishay General Semiconductor
100
10
1000
SMA6J5.0A to SMA6J8.0A
TA = 150 °C
100
10
SMA6J8.5A to SMA6J28A
1
TA = 150 °C
0.1
1
SMA6J5.0A to SMA6J28A
T
A = 25 °C
0.01
0.1
0.001
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
0.01
0.1
1
10
100
1000
Forward Voltage (V)
t - Pulse Duration (s)
Fig. 5 - Typical Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.087 (2.20)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 13-May-14
Document Number: 89460
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
SMA6J20A-M3/61
Trans Voltage Suppressor Diode, 600W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN
VISHAY
SMA6J20A-TP-HF
Trans Voltage Suppressor Diode, 600W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN
MCC
SMA6J20A/61
DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, PLASTIC, SMA, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明