SHA1.5-6N2RE [VISHAY]
CAPACITOR, TANTALUM, NON SOLID, NON-POLARIZED, 6V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED;型号: | SHA1.5-6N2RE |
厂家: | VISHAY |
描述: | CAPACITOR, TANTALUM, NON SOLID, NON-POLARIZED, 6V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED 电容器 |
文件: | 总7页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SHA
Vishay Tansitor
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
FEATURES
• Subminiature package size and light weight
• Cylindrical case with axial or radial leads
• 2 to 35 VDC
• 0.22µF to 68µF
• Operating temperature range : - 55°C to + 125°C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Utilize high CV technology to extend the range of
capacitance values in each size
• Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55°C to + 125°C
APPLICATIONS
• Hearing aids
Capacitance: Measured at 120 Hz and 25°C with a
maximum of 2.2 VDC bias and 1.0 volt rms signal.
• Portable communications
• Space/avionics
Capacitance Tolerance: Standard tolerance is ± 20% for
ratings 0.1µF and above, and + 40, - 20% for ratings below
0.1µF. Special tolerances are also available.
Dissipation Factor: When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
• Laptop computers.
DC Leakage Current (DCL Max):
MECHANICAL SPECIFICATIONS
When measured with DC voltage applied through a 1,000Ω
resistor for 5 minutes, DC leakage (µA) shall not exceed:
Solder coated nickel leads (type N32 per MIL-STD-1276)
are standard on all case sizes.
At @ 25°C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables
Leads are weldable and/or solderable.
At @ 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
Special leads are available on request (e.g. bare nickle, gold
plated nickle or ribbon leads).
At @ 125°C and 66% of rated voltage: Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables.
Lead length is 1 1/2” [38.1 mm] minimum on nonpolar parts.
Operating Voltage: Full working voltage up to 85°C. From
85°C to 125°C working voltage derates linearly to 66% of
the 85°C working voltage.
On polar parts the negative lead is 1-1/4” [31.8mm] minimum
and the positive lead is 1-1/2” [38.1mm] minimum.
ORDERING INFORMATION
SHA
MODEL
1.0
CAPACITANCE
IN µF
C7
M
35
A*
LEAD
CONFIGURATION
CASE CODE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85°C
E = +40, -20%
M = ± 20%
K = ± 10%
C = Polar
N = Nonpolar
A = Axial
R = Radial
J = ± 5%
Example of Part Number Code: SHA1.0-35C7AM
*To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
For technical questions, contact tantalum@vishay.com
www.vishay.com
68
Document Number: 43004
Revision 13-Jun-02
SHA
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Vishay Tansitor
DIMENSIONS in inches [millimeters]
AXIAL
RADIAL
POLAR STYLE
3rd Dot and Polarity
D
D
d
(+)
2nd Dot
1st Dot
2nd Dot
L
L
1st Dot
Tolerance
Dot
Tolerance
Dot
(-)
(+)
(-)
E
d
CASE
CODE
MAX
L
MAX
D
MAX
E
E TOL
±
d
C0
0.100
[2.54]
0.057
[1.45]
0.030
[0.76]
0.015
[0.38]
0.007
[0.18]
C1
C2
C3
C4
C5
C6
C7
C8
C9
0.110
[2.80]
0.125
[3.18]
0.145
[3.68]
0.160
[4.06]
0.160
[4.06]
0.190
[4.83]
0.200
[5.08]
0.225
[5.72]
0.067
[1.70]
0.067
[1.70]
0.067
[1.70]
0.070
[1.78]
0.077
[1.96]
0.077
[1.96]
0.080
[2.03]
0.100
[2.54]
0.050
[1.27]
0.050
[1.27]
0.050
[1.27]
0.050
[1.27]
0.050
[1.27]
0.050
[1.27]
0.050
[1.27]
0.070
[1.78]
0.015
[0.38]
0.015
[0.38]
0.015
[0.38]
0.015
[0.38]
0.015
[0.38]
0.015
[0.38]
0.015
[0.38]
0.020
[0.51]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.010
[0.25]
0.250
[6.35]
0.150
[3.81]
0.120
[3.05]
0.025
[0.64]
0.016
[0.41]
NON POLAR STYLE
AXIAL
RADIAL
T
T
W
W
d
Tolerance
Dot
Tolerance
Dot
2nd Dot
1st Dot
3rd Dot
2nd Dot
LR
(+)
LA
1st Dot
3rd Dot
(-)
d
E
CASE
CODE
MAX
LA
MAX
LR
MAX
W
MAX
T
E TOL
±
E
d
N1
N2
N3
N4
N5
0.175
[4.45]
0.135
[3.43]
0.120
[3.05]
0.070
[1.78]
0.100
[2.54]
0.020
[0.51]
0.010
[0.25]
0.210
[5.33]
0.160
[4.06]
0.120
[3.05]
0.070
[1.78]
0.100
[2.54]
0.020
[0.51]
0.010
[0.25]
0.240
[6.10]
0.200
[5.08]
0.140
[3.56]
0.080
[2.03]
0.100
[2.54]
0.020
[0.51]
0.010
[0.25]
0.275
[6.99]
0.235
[5.97]
0.190
[4.83]
0.105
[2.67]
0.125
[3.18]
0.020
[0.51]
0.010
[0.25]
0.310
[7.87]
0.270
[6.86]
0.290
[7.37]
0.155
[3.94]
0.200
[5.08]
0.025
[0.64]
0.016
[0.41]
For technical questions, contact tantalum@vishay.com
Document Number: 43004
Revision 13-Jun-02
www.vishay.com
69
SHA
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Vishay Tansitor
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE
MAX
DF (%)
MAX. DCL
@ + 25°C (µA)
CASE
CODE
PART NUMBER
(µF)
2 WVDC @ + 85°C
3.3
15
22
68
10
10
10
10
0.5
C1
C5
C6
C8
SHA3.3-2C1*M
SHA15-2C5*M
SHA22-2C6*M
SHA68-2C8*M
0.5
1.0
1.5
3 WVDC @ + 85°C
2.2
3.3
4.7
6.8
10
10
10
10
10
10
10
10
10
10
0.5
C1
C2
C3
C4
C5
C6
C7
C8
C9
SHA2.2-3C1*M
SHA3.3-3C2*M
SHA4.7-3C3*M
SHA6.8-3C4*M
SHA10-3C5*M
SHA15-3C6*M
SHA22-3C7*M
SHA47-3C8*M
SHA68-3C9*M
0.5
0.5
0.5
0.5
15
1.0
22
1.0
47
1.5
68
5.0
4 WVDC @ + 85°C
1.5
2.2
3.3
4.7
6.8
10
8
8
8
8
8
8
8
8
8
0.5
C1
C2
C3
C4
C5
C6
C7
C8
C9
SHA1.5-4C1*M
SHA2.2-4C2*M
SHA3.3-4C3*M
SHA4.7-4C4*M
SHA6.8-4C5*M
SHA10-4C6*M
SHA15-4C7*M
SHA33-4C8*M
SHA47-4C9*M
0.5
0.5
0.5
0.5
1.0
15
1.0
33
1.5
47
5.0
6 WVDC @ + 85°C
1.0
1.5
2.2
3.3
4.7
6.8
10
6
6
6
6
6
6
6
6
6
0.5
C1
C2
C3
C4
C5
C6
C7
C8
C9
SHA1.0-6C1*M
SHA1.5-6C2*M
SHA2.2-6C3*M
SHA3.3-6C4*M
SHA4.7-6C5*M
SHA6.8-6C6*M
SHA10-6C7*M
SHA22-6C8*M
SHA33-6C9*M
0.5
0.5
0.5
0.5
1.0
1.0
22
1.5
33
5.0
10 WVDC @ + 85°C
0.68
1.0
1.5
2.2
3.3
4.7
6.8
15
6
6
6
6
6
6
6
6
8
0.5
0.5
0.5
0.5
0.5
1.0
1.0
1.5
5.0
C1
C2
C3
C4
C5
C6
C7
C8
C9
SHA.68-10C1*M
SHA1.0-10C2*M
SHA1.5-10C3*M
SHA2.2-10C4*M
SHA3.3-10C5*M
SHA4.7-10C6*M
SHA6.8-10C7*M
SHA15-10C8*M
SHA22-10C9*M
22
*Add A for axial, R for radial
For technical questions, contact tantalum@vishay.com
www.vishay.com
70
Document Number: 43004
Revision 13-Jun-02
SHA
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Vishay Tansitor
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE
MAX
MAX. DCL
DF (%)
CASE
@ + 25°C (µF)
PART NUMBER
CODE
(µF)
15 WVDC @ + 85°C
0.47
0.68
1.0
1.5
2.2
3.3
4.7
15
6
6
6
6
6
6
6
8
0.5
C1
C1
C3
C4
C5
C6
C7
C9
SHA.47-15C1*M
SHA.68-15C1*M
SHA1.0-15C3*M
SHA1.5-15C4*M
SHA2.2-15C5*M
SHA3.3-15C6*M
SHA4.7-15C7*M
SHA15-15C9*M
0.5
0.5
0.5
0.5
1.0
1.0
5.0
20 WVDC @ + 85°C
0.33
0.47
0.68
1.0
6
6
6
6
6
6
6
8
0.5
C1
C2
C3
C4
C5
C6
C7
C9
SHA.33-20C1*M
SHA.47-20C2*M
SHA.68-20C3*M
SHA1.0-20C4*M
SHA1.5-20C5*M
SHA2.2-20C6*M
SHA3.3-20C7*M
SHA10-20C9*M
0.5
0.5
0.5
1.5
0.5
2.2
1.0
3.3
1.0
10
5.0
25 WVDC @ + 85°C
2.2
3.3
6.8
6
6
8
1.0
C7
C8
C9
SHA2.2-25C7*M
SHA3.3-25C8*M
SHA6.8-25C9*M
1.5
5.0
35 WVDC @ + 85°C
0.22
0.33
0.47
0.68
1.0
6
6
6
6
6
6
6
6
0.5
0.5
0.5
0.5
0.5
0.5
1.0
1.5
C1
C2
C3
C4
C5
C6
C7
C8
SHA.22-35C1*M
SHA.33-35C2*M
SHA.47-35C3*M
SHA.68-35C4*M
SHA1.0-35C5*M
SHA1.5-35C6*M
SHA1.5-35C7*M
SHA2.2-35C8*M
1.5
1.5
2.2
*Add A for axial, R for radial
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE
MAX
MAX. DCL
DF (%)
CASE
@ + 25°C (µF)
PART NUMBER
CODE
(µF)
2 WVDC @ + 85°C
3.3
6.8
15
10
10
10
10
0.5
N2
N3
N4
N5
SHA3.3-2N2*M
SHA6.8-2N3*M
SHA15-2N4*M
SHA47-2N5*M
0.5
1.0
47
2.5
4 WVDC @ + 85°C
2.2
8
8
8
8
0.5
0.5
1.0
2.5
N2
N3
N4
N5
SHA2.2-4N2*M
SHA4.7-4N3*M
SHA10-4N4*M
SHA33-4N5*M
4.7
10
33
* Add A for axial, R for radial
For technical questions, contact tantalum@vishay.com
Document Number: 43004
Revision 13-Jun-02
www.vishay.com
71
SHA
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Vishay Tansitor
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE
MAX
MAX. DCL
DF (%)
CASE
@ + 25°C (µF)
PART NUMBER
CODE
(µF)
6 WVDC @ + 85°C
1.5
3.3
6.8
22
6
6
6
6
0.5
N2
N3
N4
N5
SHA1.5-6N2*M
SHA3.3-6N3*M
SHA6.8-6N4*M
SHA22-6N5*M
1.0
1.0
2.5
10 WVDC @ + 85°C
1.0
2.2
4.7
15
6
6
6
6
0.5
N2
N3
N4
N5
SHA1.0-10N2*M
SHA2.2-10N3*M
SHA4.7-10N4*M
SHA15-10N5*M
1.0
1.5
2.5
15 WVDC @ + 85°C
0.68
1.5
3.3
10
6
6
6
6
0.5
N2
N3
N4
N5
SHA.68-15N2*M
SHA1.5-15N3*M
SHA3.3-15N4*M
SHA10-15N5*M
1.0
1.5
2.5
20 WVDC @ + 85°C
0.47
1.0
6
6
6
6
0.5
N2
N3
N4
N5
SHA.47-20N2*M
SHA1.0-20N3*M
SHA2.2-20N4*M
SHA6.8-20N5*M
1.0
2.2
1.5
6.8
2.5
35 WVDC @ + 85°C
0.33
0.68
1.5
6
6
6
0.5
1.0
1.5
N2
N3
N4
SHA.33-35N2*M
SHA.68-35N3*M
SHA1.5-35N4*M
* Add A for axial, R for radial
MARKING
SHA Capacitors case sizes N4 and N5 are print marked:
- Capacitance is in picofarads
All other case sizes are have color dot marking:
Capacitance
Color
Black
Brown
Red
Digit
- 1st and 2nd digits are significant figures
- 3rd digit indicates the number of zeros.
In picofarads, indicated by 3 dots.
1st and 2nd dot give
0
1
2
3
4
5
6
7
8
9
the significant digits.
3rd dot indicates the number
of zeros.
Orange
Yellow
Green
Blue
Capacitance Tolerance
Is indicated by a dot on the
side of the case.
Color
Gold
Silver
None
None
Tolerance
± 5%
± 10%
± 20%
+ 40%/- 20%
Color dot location is shown on
the dimensional sketches.
Black dot is omitted.
Black dot is omitted on black sleeve. Violet
Grey
The positive lead is indicated by a color dot of red
epoxy on the unit.
White
Radial lead style is marked with brown epoxy on the top.
Axial lead style is marked with brown epoxy on the
cathode end.
e.g. Yellow-Violet-Green = 4,700,000 pf
= 4.7 µF
For technical questions, contact tantalum@vishay.com
www.vishay.com
72
Document Number: 43004
Revision 13-Jun-02
SHA
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
Vishay Tansitor
PERFORMANCE AND RELIABILITY
The capacitors are tested in accordance with MIL-PRF-
49137, with specific requirements as follows:
IMPEDANCE vs. FREQUENCY
Temperature Stability: When tested per MIL-PRF-49137/
6, capacitance shall be within +/-15% at -55°C and 85°C,
and +/-10% at 25°C after exposure to temperature extremes.
DF shall be within 200% of initial limit at - 55°C, 150% of
initial limit at 85°C, and meet the initial at 25°C. DCL shall
be within 10 x initial limit at 85°C, and meet the initial limit at
25°C.
10K
5K
(MFD-WVDC)
2K
1K
500
200
Moisture Resistance: (per Method 106 of MIL-STD-202)
After 10 cycles of 24 hours at 25°C to 65°C and 80-98%
RH; capacitance shall be within +/-15% of initial value, DF
within 1.5 x initial limit and leakage within 3 x initial limit.
100
50
20
Life: (per Method 108 of MIL-STD-202) after 1,000 hours at
85°C and rated voltage; capacitance shall be within +/-10%
of initial limit, DF within initial limits, and leakage within 200%
of initial limit.
10
5.0
2.0
1.0
Surge Voltage: (per MIL-PRF-49317) After 1,000 cycles at
85°C and 1.3 x WVDC; capacitance shall be within +/-10%
of initial limit, DF and leakage within initial limits.
0.5
0.2
0.1
Resistance to Soldering Heat: (per Method 210 0f MIL-
STD-202, Condition B) After immersion in 260°C molten
solder to within a 1/4” of the body of the unit, there shall be
no evidence of mechanical or electrical degradation.
100
500
1
2
5
10 20 50 100
FREQUENCY
500
KHz
1
2
5 10
Hz
KHz
MHz
Solderability: (per Method 208 of MIL-STD-202) After
dipping leads in 235°C molten solder to within .125” of the
body of the unit, the solder shall cover 95% of the lead
surface.
LEAKAGE CURRENT - TEMPERATURE
Terminal Strength: (per Method 211 of MIL-STD-202)After
the following test there shall be no loosening of the terminals
or permanent damage to the terminals. Test Condition A:
(Pull Test) 0.010” leads withstand 1 pound, 0.016” leads 2
pounds and 0.007” leads 1/2 pound. Test Condition C: (Bend
Test) All leads shall withstand 3-90° bends with a 1/2 pound
applied force.
1.0
(MFD-WVDC)
CAPACITANCE VS. TEMPERATURE
+10
(MFD-WVDC)
1µF-20V
100µF-10V
+ 5
0.1
0
- 5
-10
0.01
-40
-10
0
+20
+85
TEMPERATURE °C
-40
-10
+25
+100
TEMPERATURE 0°C
+85
For technical questions, contact tantalum@vishay.com
Document Number: 43004
Revision 13-Jun-02
www.vishay.com
73
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
SHA1.5-6N2RJ
CAPACITOR, TANTALUM, NON SOLID, NON-POLARIZED, 6V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
SHA1.5-6N2RK
CAPACITOR, TANTALUM, NON SOLID, NON-POLARIZED, 6V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
SHA1.5-6N2RM
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 6V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
SHA15-2C5AM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2V, 15uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
SHA15-2C5RM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2V, 15uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明