SFH617A-4X001 [VISHAY]
SFH617A - Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 °C Rated;型号: | SFH617A-4X001 |
厂家: | VISHAY |
描述: | SFH617A - Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 °C Rated 输出元件 光电 |
文件: | 总8页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SFH617A
Vishay Semiconductors
www.vishay.com
Optocoupler, Phototransistor Output, High Reliability,
5300 VRMS, 110 °C Rated
FEATURES
• Operating temperature from - 55 °C to + 110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
1
2
4
3
A
C
C
E
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
17918-20
DESCRIPTION
APPLICATIONS
• AC adapter
• SMPS
• PLC
• Factory automation
• Game consoles
The 110 °C rated SFH617A (DIP) feature a high current
transfer ratio, low coupling capacitance and high isolation
voltage. These couplers have a GaAs infrared diode emitter,
which is optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
AGENCY APPROVALS
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6.
• CQC
ORDERING INFORMATION
DIP-4
Option 6
S
F
H
6
1
7
A
-
#
X
0
#
#
T
7.62 mm
Option 7
10.16 mm
Option 9
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
> 8 mm
8 mm typ.
AGENCY CERTIFIED/PACKAGE
UL, BSI, FIMKO, cUL
DIP-4
CTR (%)
40 to 80
63 to 125
100 to 200
160 to 320
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-3X006
SFH617A-3X007T
-
SFH617A-4
DIP-4, 400 mil, option 6
SMD-4, option 7
SFH617A-1X006
SFH617A-2X006
-
SFH617A-4X006
SFH617A-1X007T
-
SMD-4, option 9
-
SFH617A-2X009T
63 to 125
-
VDE, UL, BSI, FIMKO, cUL
DIP-4
40 to 80
100 to 200
160 to 320
SFH617A-1X001
SFH617A-2X001
SFH617A-2X016
SFH617A-2X017T
SFH617A-2X019T (1)
SFH617A-3X001
SFH617A-3X016
SFH617A-3X017T (1)
-
SFH617A-4X001
DIP-4, 400 mil, option 6
SMD-4, option 7
SFH617A-1X016
SFH617A-4X016
-
-
-
-
SMD-4, option 9
Notes
•
Additional options may be possible, please contact sales office.
(1)
Also available in tubes; do not add T to end.
Rev. 2.3, 14-Jan-13
Document Number: 83740
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
IF
6
V
mA
A
Forward current
60
2.5
70
Forward surge current
LED power dissipation
OUTPUT
tp 10 μs
IFSM
Pdiss
at 25 °C
mW
Collector emitter voltage
Emitter collector voltage
Collector current
Collector peak current
Ouput power dissipation
COUPLER
VCEO
VECO
IC
70
7
V
V
50
mA
mA
mW
tp/T = 0.5, tp 10 ms
ICM
100
150
at 25 °C
Pdiss
Isolation test voltage (RMS)
t = 1 min
VISO
RIO
5300
1012
1011
VRMS
V
IO = 500 V, Tamb = 25 °C
Isolation resistance
V
IO = 500 V, Tamb = 100 °C
RIO
Operation temperature
Storage temperature range
Soldering temperature (1)
Tamb
Tstg
Tsld
- 55 to + 110
- 55 to + 150
260
°C
°C
°C
2 mm from case, 10 s
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
IF = 60 mA
VF
IR
1.35
0.01
13
1.65
10
V
V
R = 6 V
μA
pF
V
R = 0 V, f = 1 MHz
CO
OUTPUT
Collector emitter capacitance
V
CE = 5 V, f = 1 MHz
CCE
ICEO
ICEO
ICEO
ICEO
5.2
2
pF
nA
nA
nA
nA
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
50
50
2
Collector emitter leakage current
VCE = 10 V
5
100
100
5
COUPLER
Collector emitter saturation voltage
Coupling capacitance
IF = 10 mA, f = 1 MHz
VCEsat
CC
0.25
0.4
0.4
V
pF
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Rev. 2.3, 14-Jan-13
Document Number: 83740
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
80
UNIT
%
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
CTR
40
CTR
63
125
200
320
%
IF = 10 mA, VCE = 5 V
CTR
100
160
13
%
CTR
%
IC/IF
CTR
30
45
70
90
%
CTR
22
%
IF = 1 mA, VCE = 5 V
CTR
34
%
CTR
56
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
NON-SATURATED
Turn-on time
Rise time
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
IF = 10 mA, VCC = 5 V, RL = 75
IF = 10 mA, VCC = 5 V, RL = 75
IF = 10 mA, VCC = 5 V, RL = 75
IF = 10 mA, VCC = 5 V, RL = 75
IF = 10 mA, VCC = 5 V
ton
tr
3
2
μs
μs
Turn-off time
Fall time
toff
tf
2.3
2
μs
μs
Cut-off frequency
SATURATED
fCO
100
kHz
IF = 20 mA
IF = 10 mA
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
SFH617A-1
SFH617A-2
SFH617A-3
SFH617A-4
ton
ton
ton
ton
tr
3
4.2
4.2
6
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
Turn-on time
Rise time
IF = 5 mA
IF = 20 mA
2
tr
3
IF = 10 mA
tr
3
IF = 5 mA
tr
4.6
18
23
23
25
11
14
14
15
IF = 20 mA
toff
toff
toff
toff
tf
Turn-off time
Fall time
IF = 10 mA
IF = 5 mA
IF = 20 mA
tf
IF = 10 mA
IF = 5 mA
tf
tf
Rev. 2.3, 14-Jan-13
Document Number: 83740
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
+ 5 V
I
I
IF
F
F
0
0
t p
t
IC
R
= 50 Ω
= 0.01
100 %
90 %
G
t
p
T
t
= 50 µs
p
Channel I
Channel II
Oscilloscope
R
C
= 1 MΩ
= 20 pF
10 %
L
L
0
tr
50 Ω
RL
t
td
ton
tf
toff
ts
95 10804-3
tp
td
tr
Pulse duration
Delay time
Rise time
t
t
Storage time
Fall time
Turn-off time
s
f
Fig. 1 - Test Circuit, Non-Saturated Operation
toff (= ts + tf)
ton (= td + tr)
Turn-on time
96 11698
+ 5 V
IC
IF
IF = 10 mA
Fig. 3 - Switching Times
0
RG = 50 Ω
tp
= 0.01
T
tp = 50 µs
Channel I
Channel II
Oscilloscope
RL
CL
1 MΩ
20 pF
≥
≤
50 Ω
1 kΩ
95 10843
Fig. 2 - Test Circuit, Saturated Operation
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
(according to IEC 68 part 1)
55/110/21
Comparative tracking index
Rated impulse voltage
Maximum working voltages
Forward current
CTI
VIOTM
VIORM
ISI
175
399
8
kV
V
Recurring peak voltage
890
275
400
175
mA
mW
°C
Power dissipation
PSO
TSI
Safety temperature
Creepage distance
Clearance distance
Isolation distance
7.0
7.0
0.4
mm
mm
mm
per IEC 60950 2.10.5.1
Note
•
According to DIN EN 60747-5-5 (VDE 0884-5). These optocouplers are suitable for “safe electrical insulation” only within the safety ratings.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Rev. 2.3, 14-Jan-13
Document Number: 83740
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
100 000
10 000
1000
100
Tamb = 25 °C
Tamb = 0 °C
Tamb = - 40 °C
Tamb = - 55 °C
IF = 0 mA
VCE = 40 V
VCE = 24 V
VCE = 12 V
10
Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
Tamb = 110 °C
1
0.1
0.01
0.001
0.1
1
10
100
- 60 - 40 - 20
0
20 40 60 80 100 120
I
F - Forward Current (mA)
T
amb - Ambient Temperature (°C)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 7 - Leakage Current vs. Ambient Temperature
90
1.4
IF = 30 mA
VCE = 5 V
80
IF = 5 mA
1.2
70
IF = 20 mA
1.0
IF = 10 mA
60
IF = 15 mA
0.8
0.6
50
40
30
20
10
0
IF = 10 mA
IF = 5 mA
IF = 1 mA
0.4
0.2
0
0
1
2
3
4
5
6
7
8
- 60 - 40 - 20
0
20 40 60 80 100 120
V
CE - Collector Emitter Voltage (NS) (V)
T
amb - Ambient Temperature (°C)
Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 8 - Normalized CTR (NS) vs. Ambient Temperature
30
1.4
IF = 25 mA
VCE = 0.4 V
IF = 5 mA
1.2
25
1.0
IF = 10 mA
20
IF = 10 mA
0.8
15
0.6
IF = 5 mA
IF = 1 mA
10
0.4
0.2
0
5
0
IF = 2 mA
IF = 1 mA
0
0.1
0.2
0.3
0.4
- 60 - 40 - 20
0
20 40 60 80 100 120
VCE - Collector Emitter Voltage (sat) (V)
T
amb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat)
Fig. 9 - Normalized CTR (sat) vs. Ambient Temperature
Rev. 2.3, 14-Jan-13
Document Number: 83740
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
1000
100
10
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
VCE = 10 V
Tamb = 25 °C
Tamb = 0 °C
VCC = 5 V
Tamb = 50 °C
Tamb = 75 °C
Tamb = - 40 °C
Tamb = - 55 °C
Tamb = 100 °C
Tamb = 110 °C
1
0.1
1
10
100
0.1
1
10
100
IC - Collector Current (mA)
I
F - Forward Current (mA)
Fig. 10 - Normalized CTR (NS) vs. Forward Current
Fig. 13 - CTR Frequency vs. Collector Current
1.4
1000
VCE = 0.4 V
VCE = 5 V, IF = 10 mA
1.2
1.0
0.8
0.6
0.4
0.2
0
Tamb = 25 °C
Tamb = 0 °C
toff
Tamb = 50 °C
Tamb = 75 °C
100
10
1
Tamb = - 40 °C
Tamb = - 55 °C
ton
Tamb = 100 °C
Tamb = 110 °C
0.1
0.1
0.1
1
10
100
1
10
100
I
F - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 11 - Normalized CTR (sat) vs. Forward Current
Fig. 14 - Switching Time vs. Load Resistance
0
VCE = 5 V
- 20
- 40
- 60
- 80
- 100
- 120
- 140
1
10
100
1000
f - Frequency (kHz)
Fig. 12 - CTR Frequency vs. Phase Angle
Rev. 2.3, 14-Jan-13
Document Number: 83740
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH617A
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENISONS in millimeters
4
3
6.5 0.5
Pin 1 identifier
1
2
7.62 0.3
4.58 0.5
0.85 0.1
3.5 0.3
0.5 typ.
0.26
3.3 0.5
0.5 0.1
2.8 0.5
2.54 0.25
7.62 to 9.98
i178027-10
Option 7
Option 6
Option 9
7.62 typ.
7.62 typ.
7.62 typ.
+ 0.25
- 0.3
0.35
0.1 0.1
0.6 min.
3.5 0.3
3.5 0.3
3.5 0.3
0.1 min.
0.6 min.
8 min.
2.7 min.
8.16 0.8
10.16 0.3
10.16 0.3
10.16 typ.
R 0.25
R 0.25
8 min.
11.05
7.7
1.52
1.52
11.05
20802-28
PACKAGE MARKING
SFH617A-3
V YWW 25
Notes
•
•
VDE logo is only marked on option 1 parts. Option information is not marked on the part.
Tape and reel suffix (T) is not part of the package marking.
Rev. 2.3, 14-Jan-13
Document Number: 83740
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
SFH617A-4XSM
Transistor Output Optocoupler, 1-Element, 5300V Isolation, SURFACE MOUNT, PLASTIC PACKAGE-4
ISOCOM
SFH617A-4XSMT&R
Transistor Output Optocoupler, 1-Element, 5300V Isolation, SURFACE MOUNT, PLASTIC PACKAGE-4
ISOCOM
©2020 ICPDF网 联系我们和版权申明