SAC30-E3/54 [VISHAY]
TVS DIODE 30V 48.6V DO204AC;型号: | SAC30-E3/54 |
厂家: | VISHAY |
描述: | TVS DIODE 30V 48.6V DO204AC 电视 |
文件: | 总5页 (文件大小:72K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
®
Low Capacitance TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• 500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-15 (DO-204AC)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 50 V
VBR
7.6 V to 55.5 V
500 W
PPPM
MECHANICAL DATA
PD
3.0 W
Case: DO-15 (DO-204AC)
TJ max.
Polarity
Package
175 °C
Molded epoxy over passivated body
Uni-directional
DO-15 (DO-204AC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1)
Peak pulse current with a 10/1000 μs waveform (fig. 3) (1)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 2)
Operating junction and storage temperature range
SYMBOL
PPPM
VALUE
500
UNIT
W
IPPM
See next table
3.0
A
PD
W
TJ, TSTG
-55 to +175
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Revision: 03-Mar-2020
Document Number: 88379
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
AT
MAXIMUM
REVERSE
LEAKAGE
AT
MAXIMUM MAXIMUM
MAXIMUM
JUNCTION
WORKING
INVERSE
INVERSE
BLOCKING
LEAKAGE
CURRENT
PEAK
STAND-OFF
VOLTAGE (1)
VWM
CLAMPING
VOLTAGE
AT
PEAK
PULSE
INVERSE
BLOCKING
VOLTAGE
PART
NUMBER
IT = 1.0 mA
CAPACITANCE BLOCKING
AT 0 V VOLTAGE
F) WIB (V)
CURRENT
VBR (V)
VWM
(V)
IPP = 5.0 A PER FIG. 3
ID
(μA)
(p
V
V
WIB IIB (mA)
VPIB (V)
VC (V)
IPP (A)
MIN.
SAC5.0
SAC6.0
SAC7.0
SAC8.0
SAC8.5
SAC10
SAC12
SAC15
SAC18
SAC22
SAC26
SAC30
SAC36
SAC45
SAC50
7.60
7.90
5
6
300
300
300
100
50
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
48.6
60.0
77.0
88.0
44
41
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
8.33
7
38
8.89
8
36
9.44
8.5
10
12
15
18
22
26
30
36
45
50
34
11.10
13.30
16.70
20.00
24.40
28.90
33.30
40.00
50.00
55.50
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
29
25
20
15
14
11.1
10.0
8.6
6.8
5.8
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
ORDERING INFORMATION (Example)
PREFERRED PIN
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
13" diameter paper tape and reel
SAC5.0-E3/54
0.432
54
4000
Revision: 03-Mar-2020
Document Number: 88379
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
150
100
50
Current Waveforms
TJ = 25 °C
Pulse Width (td)
Impulse
PPK
tr = 10 µs
Exponential
Decay
“0.5”
td
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
IPPM
PPK
Half Sine
td
10
td = 7 tp
Square
Half Value -
IPPM
I
PP
PPK
2
td
1
10/1000 µs Waveform
as defined by R.E.A.
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
td
0.1
0.1 µs
0
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
0
1.0
2.0
t - Time (ms)
3.0
4.0
td - Pulse Width
Fig. 3 - Pulse Waveform
Fig. 1 - Peak Pulse Power Rating Curve
100
75
50
25
0
Power Dissipation
Peak Power (Single Pulse)
TJ = Initial Temperature
Low Capacitance
TVS
L = 0.375" (9.5 mm)
Lead Lengths
Application Note: Device must be used with
two units in parallel, opposite in polarity as
shown in circuit for AC signal line protection.
0
25
50
75
100
125
150
175
TL - Lead Temperature (°C)
Fig. 4 - AC Line Protection Application
Fig. 2 - Power Derating Curve
SCHEMATIC
Diode
Transient
Voltage
Suppressor
Revision: 03-Mar-2020
Document Number: 88379
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-15 (DO-204AC)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.242 (6.15)
0.258 (6.55)
0.130 (3.3)
0.138 (3.5)
DIA.
1.0 (25.4)
MIN.
Note
•
Dimensions of mold length and diameter do not include mold flash and gate burr, mold flash shall not exceed 0.015 inch per side. These
dimensions are measured at the outermost extreme of the plastic body
Revision: 03-Mar-2020
Document Number: 88379
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
SAC30/23
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SAC30/23-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC30B
500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
LITTELFUSE
SAC30P
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-15, PLASTIC PACKAGE-2, Transient Suppressor
MCC
©2020 ICPDF网 联系我们和版权申明