S392D-G [VISHAY]
RF PIN Diodes - Dual Series;
VISHAY 
S392D-G
Vishay Semiconductors
www.vishay.com
RF PIN Diodes - Dual Series
FEATURES
• Wide frequency range 10 MHz to 1 GHz
• AEC-Q101 qualified
3
• Base P/N-HG3 - green, automotive grade
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
1
2
APPLICATIONS
• Current controlled HF resistance in adjustable
attenuators
MECHANICAL DATA
Case: SOT-23
Weight: approx. 8.1 mg
Packaging codes/options:
08/3K per 7" reel (8 mm tape), 15K/box
PARTS TABLE
PART
INTERNAL
ORDERING CODE
TYPE MARKING
PH4
REMARKS
CONSTRUCTION
S392D-G
S392D-HG3-08
Dual series
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PART
TEST CONDITION
SYMBOL
VALUE
UNIT
V
Reverse voltage
Forward continuous current
VR
IF
30
50
mA
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
on PC board
50 mm x 50 mm x 1.6 mm
Thermal resistance junction to ambient air
RthJA
500
K/W
Junction temperature
Tj
125
°C
°C
°C
Storage temperature range
Operating temperature range
Tstg
Top
- 55 to + 150
- 55 to + 125
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Forward voltage
IF = 20 mA
VF
IR
CD
rf
1
V
Reverse current
V
R = 30 V
0.05
0.5
60
μA
pF
Diode capacitance
Differential forward resistance
Reverse impedance
Minority carrier lifetime
f = 100 MHz, VR = 0 V
f = 100 MHz, IF = 1.5 mA
f = 100 MHz, VR = 0 V
IF = 10 mA, IR = 10 mA
40
5
S392D-G
zr
k
μs
4
Rev. 1.2, 25-Feb-13
Document Number: 83320
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S392D-G
Vishay Semiconductors
www.vishay.com
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
100
10
Tamb = 25 °C
1
Scattering Limit
0.1
0.01
2.0
0
0.4
0.8
1.2
1.6
95 9735
VF - Forward Voltage (V)
Fig. 1 - Forward Current vs. Forward Voltage
10 000
1000
100
f > 20 MHz
Tj = 25 °C
10
1
0.001 0.01
0.1
1
10
100
IF - Forward Current (mA)
22113
Fig. 2 - Differential Forward Resistance vs. Forward Current
20
- Circuit with 10 dB Attenuation
V0 = 40 dBmV
Π
0
f
1 = 100 MHz unmodulated
- 20
- 40
- 60
- 80
0
20
40
60
80
f2 , modulated with 200 kHz, m = 100 % (MHz)
95 9733
Fig. 3 - Typ. Cross Modulation Distortion vs. Frequency f2
Rev. 1.2, 25-Feb-13
Document Number: 83320
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S392D-G
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
3.1 (0.122)
2.8 (0.110)
0.550 ref. (0.022 ref.)
0.5 (0.020)
0.3 (0.012)
0.45 (0.018)
0.35 (0.014)
0.45 (0.018)
0.35 (0.014)
0° to 8°
2.6 (0.102)
2.35 (0.093)
0.45 (0.018)
0.35 (0.014)
Foot print recommendation:
0.7 (0.028)
1 (0.039)
0.9 (0.035)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Rev. 1.2, 25-Feb-13
Document Number: 83320
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号：
S392M53Y5US6TK7R
CAPACITOR, CERAMIC, Y5U, 3900uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
S392M53Y5US6UL7R
Ceramic Capacitor, Ceramic, 20% +Tol, 20% -Tol, Y5U, -56/+22% TC, 0.0039uF, 5324,
VISHAY
©2020 ICPDF网 联系我们和版权申明