S102L57K600B [VISHAY]

RESISTOR, METAL FOIL, 0.3 W, 0.1 %, 2.5 ppm, 57600 ohm, THROUGH HOLE MOUNT, RADIAL LEADED;


型号：	S102L57K600B
厂家：	VISHAY
描述：	RESISTOR, METAL FOIL, 0.3 W, 0.1 %, 2.5 ppm, 57600 ohm, THROUGH HOLE MOUNT, RADIAL LEADED 电阻器
文件：	总5页 (文件大小：144K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S Series

Vishay Foil Resistors

Bulk Metal^®Foil Technology

High-Performance Aerospace and Instrumentation Resistors

FEATURES

• Very low Temperature Coefficient of Resistance (TCR): *

- 55 °C to + 125 °C, 25 °C Ref

- S102C Series: ± 2 ppm/°C nominal, ± 4.5 ppm/°C maximum

- S102K Series: ± 1 ppm/°C nominal, ± 2.5 ppm/°C maximum

• Very Low TCR Tracking: to 0.5 ppm/°C

• Excellent Load Life Stability: to ± 0.005% at 70°C, 2000hrs

• Very Tight Tolerance: ± 0.005%

• Resistance Range: 0.5Ω to 1MΩ

• Excellent Shelf Life Stability:

to Maximum 0.0025 %, 1year

• High Rated Power: to 2W at +125 °C

INTRODUCTION

• Low Voltage Coefficient: (see table 2)

• Non Inductive: (see table 2)

Bulk Metal^®Foil (BMF) Technology outperforms all other

resistor technologies available today for applications that

require high precision and high stability.

• Low Current Noise: (see table 2) “Noise Free Component”

• Rise/Decay Time: (see table 2)

This technology has been pioneered and developed by

VISHAY, products based on this technology are the most

suitable for a wide range of applications. BMF technology

allows us to produce customer orientated products designed

to satisfy challenging and specific technical requirements.

• Low Thermal EMF: (see table 2)

• Terminal Finishes Available:

Lead (Pb)-free (Sn 100%)

Tin/Lead Alloy (Sn 60%, Pb 40%)

Model S Series made from Vishay BMF offers extremely low

TCR, excellent load life stability, tight tolerance, fast response

time, low current noise, low thermal EMF and low voltage

coefficient, all in one resistor.

* For values below 50Ω please contact Application Engineering

APPLICATIONS

The S Series is virtually insensitive to destabillizing factors.

The resistor element is a solid alloy that displays the desirable

bulk properties of its parent material, thus it is inherently

stable and noise free.

• High Precision Amplifiers

• High Precision Instrumentation

• Medical and Test Equipment

• Industrial

Vishay Bulk Metal^®S Series are the modern generation of

precision resistors, their design gives you a unique

combination of characteristics found in no other single

resistor- and they’re all standard.

• Audio (High End Stereo Equipment)

• EB Applications (electron beam scanning and recording

equipment, electron microscopes)

Our Application Engineering Department is prepared to

advise and to make recommendation for non-standard

technical requirements and special applications, please

• Military, Airborne

• Measurement Instrumentation

SALES

• ISRAEL: foilsales.israel@vishay.com

• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com

• AMERICAS: foilsales.usa@vishay.com

• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com

For technical questions in the Americas, contact foilsupport1@vishay.com

For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com

www.vishay.com

Document Number: 63001

Revision 31-Jan-05

S Series

Vishay Foil Resistors

FIGURE 1 - STANDARD IMPRINTING AND DIMENSIONS

Front View

Rear View

Optional Customer Part Number

Print specification, etc. if required

Date Code

Resistance

Value Code

VISHAY

XXXX

XXXXXX

100R01

0.01%

Year Week

S102C

Tolerance

Model Number

Lead Material #22 AWG

Round Solder Coated Copper

*The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board

when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the

unit after all soldering processes.

TABLE 1 - MODEL SELECTION

TIGHTEST TOLERANCE%

VS. LOWEST

MODEL

RESISTANCE MAXIMUM

AMBIENT

AVERAGE

WEIGHT

DIMENSIONS

INCHES mm

NUMBER

RANGE

WORKING POWER RATING

RESISTANCE VALUE

Ω

(Ω)

VOLTAGE @+70°C @+125°C IN GRAMS

*F (INCHES)

S102C

1 to 150K

1 to 100K

1 to 500K

1 to 300K

1 to 750K

1 to 500K

0.5 to 1M

0.5 to 600K

300

350

500

0.6 W

0.3 W

0.6

1.4

1.9

4.0

W: 0.105 ± 0.010 2.67 ± 0.25

L: 0.300 ± 0.010 7.62 ± 0.25

H: 0.326 ± 0.010 8.28 ± 0.25

ST: 0.010 Minimum 0.254 Minimum

SW: 0.040 ± 0.005 1.02 ± 0.13

LL: 1.000 ± 0.125 25.4 ± 3.18

LS: 0.150 ± 0.005⁴3.81 ± 0.13

up to 100K

S102K

0.4 W

0.2 W

over 100K

± 0.005 / 50

± 0.01 / 25

± 0.02 / 12

± 0.05 / 5

± 0.1 / 2

S104D (S104F*)

S104K

1.0 W

0.5 W

W: 0.160 Maximum 4.06 Maximum (0.138)

L: 0.575 Maximum 14.61 Maximum (0.565)

H: 0.413 Maximum 10.49 Ma ximum (0.413)

ST: 0.035 ± 0.005 0.889 ± 0.13

up to 200K

0.6 W

0.3 W

SW: 0.050 ± 0.005 1.27 ± 0.13

over 200K

LL: 1.000 ± 0.125 25.4 ± 3.18

LS: 0.400 ± 0.020 10.16 ± 0.51

S105D (S105F*)

S 105K

1.5 W

0.75 W

W: 0.160 Maximum 4.06 Maximum (0.138)

L: 0.820 Maximum 20.83 Maximum (0.890)

H: 0.413 Maximum 10.49 Maximum (0.413)

ST: 0.035 ± 0.005 0.889 ± 0.13

up to 300K

± 0.5 / 1

0.8 W

0.4 W

SW: 0.050 ± 0.005 1.27 ± 0.13

over 300K

LL: 1.000 ± 0.125 25.4 ± 3.18

LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.02)

S106D

2.0 W

1.0 W

W: 0.260 Maximum 6.60 Maximum

L: 1.200 Maximum 30.48 Maximum

H: 0.413 Maximum 10.49 Maximum

ST: 0.035 ± 0.005 0.889 ± 0.13

SW: 0.050 ± 0.005 1.27 ± 0.13

LL: 1.000 ± 0.125 25.4 ± 3.18

LS: 0.900 ± 0.020 22.86 ± 0.51

up to 400K

S106K

1.0 W

0.5 W

over 400K

*S104F and S105F have different package dimensions (see last

column). All other specifications are the same.

FIG 2 - POWER DERATING CURVE "S" SERIES

**0.200” (5.08mm) lead spacing available - specify S102J for

S102C, and S102L for S102K.

–55°C

+70°C

200%

175%

150%

125%

100%

75%

50%

25%

Double Rated Power

Note its minor outline dimensions variations:

INCHES

Rated Power

0.098 Maximum

0.295 Maximum

0.315 Maximum

0.01 Minimum

0.875 Minimum

0.200 ± 0.003

2.49 Maximum

7.49 Maximum

8.00 Maximum

0.254 Minimum

22.23 Minimum

5.08 ± 0.076

Safe operation

for <150 ppm

∆R after 2,000

hours load-life.

ST:

LL:

–75 –50 –25

+25 +50 +75 +100 +125 +150 +175 +200

Ambient Temperature (°C)

SALES

• ISRAEL: foilsales.israel@vishay.com

• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com

• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com

• AMERICAS: foilsales.usa@vishay.com

For technical questions in the Americas, contact foilsupport1@vishay.com

For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com

www.vishay.com

Document Number: 63001

Revision 31-Jan-05

S Series

Vishay Foil Resistors

Bulk Metal^®Foil Technology

High-Performance Aerospace and Instrumentation Resistors

TABLE 2 - “S” SERIES SPECIFICATIONS

Stability¹

± 0.015%

± 0.005%

Maximum ∆R @ 0.3W/+ 125°C

Maximum ∆R @ 0.1W/+ 70°C

Load Life at 2,000 hours.

± 0.05%

± 0.01%

Maximum ∆R @ 0.3W/+ 125°C

Maximum ∆R @ 0.05W/+ 125°C

Load Life at 10,000 hours.

Shelf Life Stability

Current Noise

± 0.0025% Maximum ∆R after 1 year

± 0.005%

Maximum ∆R after 3 years

0.010µV

(RMS)/Volt of applied voltage (–40dB)

High Frequency Operation

Rise/Decay Time

1.0ns at 1KΩ

0.1µH maximum; 0.08µH typical

Inductance (L)²

1.0pF maximum; 0.5pF typical

Capacitance (C)

< 0.1ppm/V³

Voltage Coefficient

Thermal EMF⁴

0.1µV/°C

1µV/watt

Maximum; 0.05µV/°C typical

(Model S102C)

1. Load life ∆R Maximum can be reduced by 80% through an optional burn-in procedure.

2. Inductance (L) due mainly to the leads.

3. The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero.”)

4. µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.

TABLE 3 - ORDERING INFORMATION

Specify Vishay S Series resistors as follows:

Example:

V = ± 0.005%

T = ± 0.01%

Q = ± 0.02%

A = ± 0.05%

B = ± 0.1%

C = ± 0.25%

D = ± 0.5%

F = ± 1.0%

T = Lead (Pb)-free

none = Tin/Lead alloy

S102C

250R00

MODEL NO.

TERMINATION

RESISTANCE VALUE

TOLERANCE

Resistance Value, in ohms, is expressed by a series of 6 characters, 5 of which represent significant digits while the 6th is

a dual purpose letter that designates both the multiplier and the location of the comma or decimal.

RESISTANCE

RANGE

LETTER

DESIGNATOR

MULTIPLIER

FACTOR

EXAMPLE

10Ω to <1KΩ

1KΩ to 100KΩ

x 1

100R01 = 100.01Ω

5K2310 = 5,231Ω

x 10³

For example: S102C T 250R00 V - Model: S102C; Termination: lead (Pb)-free; Value: 250Ω; Tolerance: 0.005%

SALES

• ISRAEL: foilsales.israel@vishay.com

• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com

• AMERICAS: foilsales.usa@vishay.com

• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com

For technical questions in the Americas, contact foilsupport1@vishay.com

For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com

www.vishay.com

Document Number: 63001

Revision 31-Jan-05

S Series

Vishay Foil Resistors

Bulk Metal^®Foil Technology

High-Performance Aerospace and Instrumentation Resistors

TABLE 4 - ENVIRONMENTAL PERFORMANCE COMPARISON

MIL-PRF-55182

S-SERIES

CHAR J

MAXIMUM ∆R

TYPICAL ∆R

Test Group I

Thermal Shock

Overload

± 0.2%

± 0.01%

± 0.002%

± 0.003%

Test Group II

Resistance Temperature

Characteristic

± 25ppm/°C

+ 4.5ppm/°C

Low Temp Storage

Low Temp Operation

Terminal Strength

± 0.15%

± 0.2%

± 0.01%

± 0.005%

± 0.002%

Test Group III

DWV

± 0.15%

± 0.1%

± 0.4%

± 0.01%

± 0.05%

± 0.005%

± 0.002%

± 0.02%

Resistance to Solder Heat

Moisture Resistance

Test Group IV

Shock

± 0.2%

± 0.01%

± 0.002%

Vibration

Test Group V

Life Test @ 0.3 W/+125°C

2,000 Hours

± 0.5%

± 2.0%

± 0.015%

± 0.05%

± 0.01%

± 0.03%

10,000 Hours

Test Group Va

+70°C Power Rating

± 0.5%

±0.1%

± 0.05%

Test Group VI

High Temperature Exposure

± 2.0%

± 0.1%

± 0.05%

Test Group VII

Voltage Coefficient

0.005%/V

< 0.00001%/V

STANDARD OPERATIONS & TEST CONDITIONS

A. Standard Test Operations:

IMPROVED PERFORMANCE TESTING

Theprecedinginformationisbasedonproductdirectlyoffthe

production line. Improved performance (meaning increased

time stability with load and other stresses) is available

through factory conducted "Improved Performance Testing".

The test routine is usually tailored to the users stabilty

objectives and product that has been screened can be

brought down to a potential load life of less than 50ppm.

By 100% Inspection

•

Short-time overload (6.25 x rated power for 5 seconds)

Resistance – tolerance check

Visual and mechanical

By Sample Inspection

•

TCR

Various screen test routines are available and all anticipated

stresses must be taken into account before settling on one

specific test routine. Our Applications Engineering

Department is prepared to discuss and recommend

appropriate routines given the full spectrum of anticipated

stresses and stability requirements.

Environmental tests per Table 3 on a quarterly basis to

establish performance by similarity.

B. Standard Test Conditions:

•

Lead test point: 0.5" (12.7 mm) from resistor body

Temperature: + 22°C ± 2°C

Relative humidity: per MIL-Std-202

SALES

• ISRAEL: foilsales.israel@vishay.com

• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com

• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com

• AMERICAS: foilsales.usa@vishay.com

For technical questions in the Americas, contact foilsupport1@vishay.com

For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com

www.vishay.com

Document Number: 63001

Revision 31-Jan-05

Legal Disclaimer Notice

Vishay

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,

or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's

terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness

for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify Vishay for any damages resulting from such improper use or sale.

Document Number: 91000

Revision: 08-Apr-05

www.vishay.com

S102L57K600B [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E