RE10LH40D152 [VISHAY]
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC;
| 型号： | RE10LH40D152 |
| 厂家： | 
VISHAY |
| 描述： | Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC 传感器 换能器 |
| 文件： | 总3页 (文件大小：223K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series REC 10 LH
Vishay Sfernice
Precision Linear Transducers,
Designed for Mounting in Hydraulic or Pneumatic Cylinder,
Conductive Plastic Element (Unsealed Series/Ø 10 mm)
FEATURES
• Large range of strokes from 25 to 500 mm
• High accuracy
RoHS
COMPLIANT
• Very good repeatability
• Continuous resolution
• Easy mounting
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
ELECTRICAL SPECIFICATIONS
Theoretical Electrical Travel (TET) = E
From 25 mm to 500 mm in increments of 25 mm
1 ꢀ% ≤ 0.1 ꢀ
≤
Independent Linearity (over TET)
On Request
≤
0.05 ꢀ if E ≥ 100 mm
0.025 ꢀ if E ≥ 200 mm
≤
Actual Electrical Travel (AET)
Total Resistance RT
Resistance Tolerance at 20 °C
Repeatability
TET + 6 mm 0.5
150 Ω/cm
20 ꢀ
≤ 0.01 ꢀ
Maximum Power Rating
Wiper Current
0.05 W/cm at 70 °C, 0 W at 125 °C
1 mA max. continuous, recommended: a few µA
1000 times RT minimum
Load Impedance
Insulation Resistance
Dielectric Strength
> 1000 MΩ, 500 VDC
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical Travel (MT)
MT = TET
Anodized aluminum
Body
Rod Internal Diameter
Operating Force
Electrical Outputs
Oil
10 LH: Ø 12 mm
1 N typical
Wires, L = 300 mm
Insulating mineral hydraulic
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
Pressure
Wiper
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C 5 °C/80 ꢀ TET
Temperature Limits
Speed at 20 °C
- 20 °C to + 80 °C
1.5 m/s max.
www.vishay.com
54
For technical questions, contact: sfer@vishay.com
Document Number: 54020
Revision: 01-Feb-08
Series REC 10 LH
Precision Linear Transducers,
Designed for Mounting in Hydraulic or Pneumatic Cylinder,
Conductive Plastic Element (Unsealed Series/Ø 10 mm)
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance 1 mm
19.9
18.5
AET = TET + 6 1.5
MT = E
4.5
G VIEW
- 0.1
- 0.2
GREEN WIRE
Ø 12
RED WIRE
RESISTIVE TRACK
YELLOW WIRE
L = E + 51 MAX.
15.3
1.7
7
15.3 + 0.1
- 0.1
A
A
13.8 + 0.1
- 0.1
+ 0.2
- 0
Ø 19
+ 0.3
+ 0.1
Ø 12
+ 0.2
- 0
Ø 18
+ 0.1
- 0
1.1
General Tolerance: 1 mm
MOUNTING IN ACTUATOR
ELECTRICAL CONNECTIONS
GREEN WIRE : +
RED WIRE: WIPER
YELLOW WIRE: -
TET
AET
TET = THEARETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
ORDERING INFORMATION/DESCRIPTION
REC
10
LH
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Unsealed
Times 25 mm
A: ≤ 1 ꢀ
First 2 digits are
Special feature
code number
D: ≤ 0.1 ꢀ
E: ≤ 0.05 ꢀ
F: ≤ 0.025 ꢀ
significant numbers
Third indicates
number of zeros
SAP PART NUMBERING GUIDELINES
RE
10 LH
4
D
152
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Document Number: 54020
Revision: 01-Feb-08
For technical questions, contact: sfer@vishay.com
www.vishay.com
55
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
RE10LH40E152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC
VISHAY
RE10LH4D152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-500mm, RECTANGULAR, ROHS COMPLIANT
VISHAY
RE10LH4F152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-500mm, RECTANGULAR, ROHS COMPLIANT
VISHAY
RE10V222MTR13X26
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 2200uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
MERITEK
RE10V332MTA13X31
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 3300uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
MERITEK
©2020 ICPDF网 联系我们和版权申明