RCWE1020 [VISHAY]

Thick Film Surface Mount Chip Resistors,;


型号：	RCWE1020
厂家：	VISHAY
描述：	Thick Film Surface Mount Chip Resistors,
文件：	总4页 (文件大小：93K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RCWE

Vishay Dale

www.vishay.com

Thick Film Surface Mount Chip Resistors,

Wraparound, Extremely Low Value (0.01  to 0.976 )

FEATURES

• Extremely low resistance values 

(0.01  to 0.976 )

• Enhanced power rating due to long side terminal

construction (0612, 1020 types)

• Suitable for current sensing and shunts

• Metal glaze on high quality ceramic

• Protective overglaze

• Lead (Pb)-free solder contacts on Ni barrier layer

• AEC-Q200 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

TEMPERATURE

COEFFICIENT

ppm/°C

RESISTANCE

RANGE



GLOBAL 

MODEL

TOLERANCE

ꢀ

CASE SIZE

P_{70 °C}

E-SERIES ⁽²⁾

400

200

100

700

400

200

100

400

300

200

100

300

200

100

600

300

200

100

500

300

200

100

200

100

600

300

200

100

600

300

200

100

0.033 to 0.05

0.051 to 0.18

0.2 to 0.976

5.0

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

5.0

24; 96

RCWE0402

RCWE0603

0402

0.125

0.2

0.010 to 0.018

0.02 to 0.03

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

5.0

0603

0.033 to 0.105

0.11 to 0.976

0.010 to 0.018

0.02 to 0.03

24; 96

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

2.0, 5.0

1.0, 5.0

5.0

RCWE0805

RCWE0612

RCWE1206

0805

0612

1206

0.25

1.0

0.033 to 0.05

0.051 to 0.976

0.010 to 0.016

0.018 to 0.2

24; 96

0.205 to 0.976

0.010 to 0.018

0.02 to 0.03

24; 96

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

5.0

0.5

0.033 to 0.05

0.051 to 0.976

0.010 to 0.018

0.02 to 0.03

24; 96

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

2.0, 5.0

1.0, 5.0

5.0

RCWE1210

RCWE1020

RCWE2010

1210

1020

2010

1.0

2.0

1.0

0.033 to 0.05

0.051 to 0.976

0.010 to 0.016

0.0162 to 0.976

0.010 to 0.018

0.02 to 0.03

24; 96

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

5.0

0.033 to 0.05

0.051 to 0.976

0.010 to 0.018

0.02 to 0.03

24; 96

1.0, 5.0

0.5, 1.0, 5.0 ⁽¹⁾

RCWE2512

2512

2.0

0.033 to 0.05

0.051 to 0.976

24; 96

Notes

•

Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.

Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020).

Tight tolerance of 0.5 % is available for resistance values above 0.200 .

Use E24 decade values for 5.0 % tolerance parts and E96 decade values for 0.5 % and 1.0 %. Refer to Standard Decade Table

(www.vishay.com/doc?31001).

•

(1)

(2)

Revision: 07-Oct-15

Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE

Vishay Dale

www.vishay.com

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)

GLOBAL MODEL

(8 digits)

VALUE

(4 digits)

TOLERANCE

(1 digit)

TCR

(1 digit)

PACKAGING

(2 digits)

RCWE0402

RCWE0603

RCWE0805

RCWE0612

RCWE1206

RCWE1210

RCWE1020

RCWE2010

RCWE2512

L = m *

D = 0.5 %

F = 1.0 %

G = 2.0 %

J = 5.0 %

K = 100 ppm/ꢀC

N = 200 ppm/ꢀC

M = 300 ppm/ꢀC

Q = 400 ppm/ꢀC

P = 500 ppm/ꢀC

T = 600 ppm/ꢀC

G = 700 ppm/ꢀC

EA = lead (Pb)-free,

R = decimal

10L0 = 0.01 

R470 = 0.47 

Note:

tape/reel

* Use “

L” for resistance

values < 0.1



TECHNICAL SPECIFICATIONS

PARAMETER

UNIT RCWE0402 RCWE0603 RCWE0805 RCWE0612 RCWE1206 RCWE1210 RCWE1020 RCWE2010 RCWE2512

Operating temp.

ꢀC

-55 to +155

range

Maximum operating

voltage

(P x R)^1/2

Insulation voltage



> 75

0.7

> 100

> 200

5.5

> 100

11.5

> 300

> 10⁹

10.5

> 300

17.5

> 300

27.5

> 300

40.5

_ins(1 min)

Insulation resistance

Weight/1000 pieces

(typical)

DIMENSIONS

RCWE0402 to RCWE2512

RCWE0612, RCWE1020

DIMENSIONS in millimeters

SOLDER PAD DIMENSIONS in millimeters

RESISTANCE

MODEL

RANGE



RCWE0402 0.033 to 0.976 1.05 0.05 0.55 0.05 0.35 0.1 0.3 0.15 0.25 0.1

0.7

0.9

0.7

1.0

0.8

0.9

1.3

1.2

1.0

1.3

0.9

1.2

2.3

1.4

2.8

1.6

0.7

1.0

1.4

3.5

1.8

2.6

5.5

3.0

3.6

0.3

0.4

0.8

0.6

1.0

0.8

1.0

1.2

1.6

1.1

2.0

1.4

3.2

1.4

3.8

0.01 to 0.03

0.033 to 0.976

0.01 to 0.03

0.5 0.2

0.3 0.2

0.6 0.2

0.4 0.2

RCWE0603

RCWE0805

1.6 0.1

0.85 0.1 0.5 0.1

1.3 0.1 0.55 0.1

0.3 0.2

2.0 0.15

1.6 0.2

0.35 0.2

0.033 to 0.976

RCWE0612 0.01 to 0.976

0.01 to 0.03

3.2 0.2

0.6 0.1 0.4 0.15 0.25 0.15

0.9 0.2

RCWE1206 0.033 to 0.05 3.1 0.15 1.6 0.15 0.6 0.1

0.8 0.2

0.45 0.2

0.8 0.2

0.4 0.2

0.45 0.2

0.051 to 0.976

0.01 to 0.03

RCWE1210

3.1 0.2

2.5 0.2

5.0 0.2

0.6 0.1

0.4 0.2

0.033 to 0.976

RCWE1020 0.01 to 0.976

0.01 to 0.03

0.6 0.1 0.55 0.15 0.30 0.15

1.6 0.3

RCWE2010 0.033 to 0.05

0.051 to 0.976

0.01 to 0.03

RCWE2512 0.033 to 0.05

0.051 to 0.976

5.0 0.2

2.5 0.15 0.6 0.1

0.7 0.3

2.0 0.3

0.8 0.3

0.6 0.2

6.3 0.2 3.15 0.15 0.6 0.1

0.6 0.2

Revision: 07-Oct-15

Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE

Vishay Dale

www.vishay.com

DERATING

120

100

- 55

- 25

100

125

155

175

Ambient Temperature in °C

PERFORMANCE

TEST

CONDITIONS OF TEST

TEST LIMITS

Thermal shock

MIL-STD-202, method 107, -55 ꢀC to +125 ꢀC, 300 cycles at each extreme

2 x rated power; duration according the model

(1.0 % + 0.0005 ) R

(0.5 % + 0.0005 ) R

(2.0 % + 0.0005 ) R

(1.0 % + 0.0005 ) R

(2.0 % + 0.0005 ) R

Short time overload

High temperature exposure

Temperature cycling

Biased humidity

Mechanical shock

Vibration

MIL-STD-202, method 108, 1000 h at T = 125 ꢀC, 0 % power

JESD 22, method JA-104, 1000 cycles (-55 ꢀC to +125 ꢀC)

MIL-STD-202, method 103, 1000 h 85 ꢀC/85 % RH, 10 % x (P x R)^1/2

MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions

MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz

MIL-STD-202, method 108, 1000 h at T = 125 ꢀC at rated power

Operational life

MIL-STD-202, method 210, +260 ꢀC solder, 10 s to 12 s dwell, 25 mm/s

emergence

Resistance to solder heat

Moisture resistance

(1.0 % + 0.0005 ) R

(2.0 % + 0.0005 ) R

MIL-STD-202, method 106, 0 % power, 7a and 7b not required

PACKAGING

REEL

MODEL

TAPE WIDTH

DIAMETER

180 mm/7"

PITCH

2 mm

4 mm

8 mm

PIECES/REEL

10 000

5000

CODE

RCWE0402

RCWE0603

RCWE0805

RCWE0612

RCWE1206

RCWE1210

RCWE1020

RCWE2010

RCWE2512

8 mm/punched paper

12 mm/embossed plastic

5000

4000

2000

Note

Embossed carrier tape per EIA-481-1A.

•

Revision: 07-Oct-15

Document Number: 20019

For technical questions, contact: ff2cresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 13-Jun-16

Document Number: 91000

RCWE1020 [VISHAY]

相关型号：

RCWE1020R562FKEA

RCWE1206

RCWE120610L0DKEA

RCWE120610L0DMEA

RCWE120610L0DNEA

RCWE120610L0DQEA

RCWE120610L0FKEA

RCWE120610L0FMEA

RCWE120610L0FNEA

RCWE120610L0FQEA

RCWE120610L0JKEA

RCWE120610L0JMEA