P4SMA6.8AHE3_A/I [VISHAY]
Trans Voltage Suppressor Diode, 400W, 5.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN;
| 型号： | P4SMA6.8AHE3_A/I |
| 厂家： | 
VISHAY |
| 描述： | Trans Voltage Suppressor Diode, 400W, 5.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN 局域网 光电二极管 |
| 文件： | 总6页 (文件大小：87K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P4SMA Series
Vishay General Semiconductor
www.vishay.com
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 % (300 W above 91 V)
• Excellent clamping capability
• Very fast response time
DO-214AC (SMA)
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM
6.4 V to 459 V
6.8 V to 540 V
6.8 V to 220 V
400 W, 300 W
3.3 W
TYPICAL APPLICATIONS
V
BR (uni-directional)
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
V
BR (bi-directional)
PPPM
PD
IFSM (uni-directional only)
TJ max.
40 A
MECHANICAL DATA
150 °C
Case: DO-214AC (SMA)
Polarity
Uni-directional, bi-directional
DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
Package
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. P4SMA10CA).
Electrical characteristics apply in both directions.
meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
400
UNIT
W
Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
IPPM
See next table
3.3
A
PD
W
IFSM
40
A
TJ, TSTG
- 65 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 300 W above 91 V
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 10-Jan-14
Document Number: 88367
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
MAXIMUM
PEAK
DEVICE
MARKING
CODE
MAXIMUM
MAXIMUM
VOLTAGE
TEST
CURRENT
IT
STAND-OFF REVERSE
CLAMPING TEMPERATURE
(1)
PART
V
BR AT IT
(V)
VOLTAGE
VWM
LEAKAGE
AT VWM
PULSE
VOLTAGE
AT IPPM
COEFFICIENT
OF VBR
NUMBER
CURRENT
(4)
(2)
(mA)
(V)
ID
IPPM
V
C (V)
(%/°C)
UNI
BI
MIN. MAX.
(μA)
1000
500
200
50
(A)
38.1
35.4
33.1
29.9
27.6
25.6
24.0
22.0
18.9
17.8
15.9
14.4
13.1
12.0
10.7
9.7
8.8
8.0
7.4
6.7
6.2
5.7
5.2
4.7
4.3
3.9
3.5
3.2
2.2
2.0
1.8
1.7
1.4
1.4
1.3
1.2
1.1
0.9
P4SMA6.8A 6V8A 6V8C 6.45
P4SMA7.5A 7V5A 7V5C 7.13
P4SMA8.2A 8V2A 8V2C 7.79
P4SMA9.1A 9V1A 9V1C 8.65
7.14
7.88
8.61
9.55
10.5
11.6
12.6
13.7
15.8
16.8
18.9
21.0
23.1
25.2
28.4
31.5
34.7
37.8
41.0
45.2
49.4
53.6
58.8
65.1
71.4
78.8
86.1
95.5
105
10
10
10
5.80
6.40
7.02
7.78
8.55
9.40
10.2
11.1
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53.0
58.1
64.1
70.1
77.8
85.5
94.0
102
111
128
136
145
154
171
185
214
256
300
342
376
408
434
459
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
104
113
125
137
152
165
179
207
219
234
246
274
328
344
414
482
548
602
658
698
740
0.057
0.061
0.065
0.068
0.073
0.075
0.078
0.081
0.084
0.086
0.089
0.090
0.092
0.090
0.096
0.097
0.098
0.099
0.100
0.101
0.101
0.102
0.103
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.106
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
P4SMA10A
P4SMA11A
P4SMA12A
P4SMA13A
P4SMA15A
P4SMA16A
P4SMA18A
P4SMA20A
P4SMA22A
P4SMA24A
P4SMA27A
P4SMA30A
P4SMA33A
P4SMA36A
P4SMA39A
P4SMA43A
P4SMA47A
P4SMA51A
P4SMA56A
P4SMA62A
P4SMA68A
P4SMA75A
P4SMA82A
P4SMA91A
10A 10C
11A 11C
12A 12C
13A 13C
15A 15C
16A 16C
18A 18C
20A 20C
22A 22C
24A 24C
27A 27C
30A 30C
33A 33C
36A 36C
39A 39C
43A 43C
47A 47C
51A 51C
56A 56C
62A 62C
68A 68C
75A 75C
82A 82C
91A 91C
9.5
10
10.5
11.4
12.4
14.3
15.2
17.1
19.0
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
P4SMA100A 100A 100C 95.0
P4SMA110A 110A 110C 105
P4SMA120A 120A 120C 114
P4SMA130A 130A 130C 124
P4SMA150A 150A 150C 143
P4SMA160A 160A 160C 152
P4SMA170A 170A 170C 162
P4SMA180A 180A 180C 171
P4SMA200A 200A 200C 190
P4SMA220A 220A 220C 209
116
126
137
158
168
179
189
210
231
P4SMA250A 250A
P4SMA300A 300A
P4SMA350A 350A
P4SMA400A 400A
P4SMA440A 440A
P4SMA480A 480A
P4SMA510A 510A
P4SMA540A 540A
-
-
-
-
-
-
-
-
237
285
333
380
418
456
485
513
263
315
368
420
462
504
535
567
0.87
0.73
0.62
0.55
0.50
0.46
0.43
0.41
Notes
(1)
(2)
(3)
(4)
(5)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE CA62.35
For bi-directional types with VR of 10 V and less, the ID limit is doubled
VF = 3.5 V at IF = 25 A (uni-directional only)
Revision: 10-Jan-14
Document Number: 88367
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient air (1)
SYMBOL
VALUE
120
UNIT
RJA
°C/ W
Typical thermal resistance, junction to lead
RJL
30
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
VOLTAGE RANGE
(V)
UNIT WEIGHT
(g)
PACKAGE
CODE
BASE
PREFERRED P/N
DELIVERY MODE
QUANTITY
UNI -
BI -
6.8 to 220
6.8 to 220
6.8 to 220
6.8 to 220
-
P4SMA6.8A-E3/61
0.064
0.064
0.064
0.064
0.064
0.064
6.8 to 540
6.8 to 540
6.8 to 540
6.8 to 540
250 to 540
250 to 540
61
5A
61
5A
H
1800
7500
1800
7500
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
P4SMA6.8A-E3/5A
P4SMA6.8AHE3/61 (1)
P4SMA6.8AHE3/5A (1)
P4SMA250AHE3_A/H (1)
P4SMA250AHE3_A/I (1)
-
I
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
100
75
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
P4SMA6.8A -
P4SMA91A
50
P4SMA100A -
P4SMA220A
25
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
0.1
0.1 µs
0
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
0
25
50
75
100 125
150 175
200
td - Pulse Width (s)
TJ - Initial Temperature (°C)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Revision: 10-Jan-14
Document Number: 88367
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
150
200
TJ = 25 °C
Pulse Width (td)
TJ = TJ max.
tr = 10 µs
8.3 ms Single Half Sine-Wave
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
100
50
IPPM
100
50
0
IPP
Half Value -
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
10
1.0
3.0
4.0
0
2.0
1
5
10
50
100
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Uni-Directional Use Only
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Measured at
Stand-Off
Voltage VWM
1000
100
10
Uni-Directional
Bi-Directional
1
10
100
200
VBR - Breakdown Voltage (V)
Fig. 4 - Typical Junction Capacitance
1000
100
10
1
0.001
0.01
0.1
1
10
100
1000
tp - Pulse Duration (s)
Fig. 5 - Typical Transient Thermal Impedance
Revision: 10-Jan-14
Document Number: 88367
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 10-Jan-14
Document Number: 88367
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明