MDP1403105KFE04 [VISHAY]

Res Net,Thick Film,105K Ohms,1% +/-Tol,-100,100ppm TC,7525 Case;


型号：	MDP1403105KFE04
厂家：	VISHAY
描述：	Res Net,Thick Film,105K Ohms,1% +/-Tol,-100,100ppm TC,7525 Case 电阻器
文件：	总5页 (文件大小：110K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MDP 01, 03, 05

www.vishay.com

Vishay Dale

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

FEATURES

• Isolated, bussed, and dual terminator schematics

available

Available

• 0.160" (4.06 mm) maximum seated height and

rugged, molded case construction

• Thick film resistive elements

• Low temperature coefficient (-55 °C to +125 °C)



100 ppm/°C

• Reduces total assembly costs

• Compatible with automatic inserting equipment

Available

• Wide resistance range (10

• Uniform performance characteristics

• Available in tube pack

 to 2.2 M)

• Material categorization: For definitions of compliance please

see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts

with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL/

NO. OF

PINS

POWER RATING

ELEMENT ⁽¹⁾

P_{70 °C}

TEMPERATURE

COEFFICIENT

(-55 °C to +125 °C)

ꢁꢁm/°C

TCR

RESISTANCE

RANGE



TOLERANCE ⁽³⁾

ꢀ

TRACKING ⁽²⁾

(-55 °C to +125 °C)

ꢁꢁm/°C

WEIGHT

SCHEMATIC

0.125

0.250

0.125

0.250

0.125

10 to 2.2M

Consult factory

10 to 2.2M

Consult factory

100

MDP 14

1, 2, 5

100

1.3

1.5

MDP 16

100

Notes

(1)

(2)

(3)

For resistor power ratings at +25 °C see derating curves

Tighter tracking available

2 ꢀ standard, 1 ꢀ, and 5 ꢀ available

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MDP1403100RGD04 (ꢁreferred ꢁart numbering format)

GLOBAL

MODEL

RESISTANCE

VALUE

TOLERANCE

CODE

PIN COUNT

SCHEMATIC

PACKAGING

SPECIAL

MDP

14 = 14 pin

16 = 16 pin

01 = Bussed

03 = Isolated

00 = Special

E04 = Lead (Pb)-free, tube Blank = Standard

R = 

K = k

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

S = Special

(Dash Number)

D04 = Tin/lead, tube

(up to 3 digits)

From 1 to 999

as applicable

M = M

10R0 = 10 

680K = 680 k

Z = 0  Jumper

1M00 = 1.0 M

0000 = 0  Jumper

Historical Part Number Examꢁle: MDP1403101G (will continue to be acceꢁted)

MDP

101

D04

HISTORICAL MODEL

PIN COUNT

SCHEMATIC

RESISTANCE VALUE TOLERANCE CODE

PACKAGING

New Global Part Numbering: MDP1405121CGD04 (ꢁreferred ꢁart numbering format)

GLOBAL

MODEL

RESISTANCE

VALUE

TOLERANCE

CODE

PIN COUNT

SCHEMATIC

PACKAGING

SPECIAL

MDP

14 = 14 pin

16 = 16 pin

05 = Dual

3 digit impedance code,

followed by alpha

modifier (see Impedance

Codes table)

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

E04 = Lead (Pb)-free, tube Blank = Standard

terminator

(Dash Number)

D04 = Tin/lead, tube

(up to 3 digits)

From 1 to 999

as applicable

Historical Part Number Examꢁle: MDP1405221271G (will continue to be acceꢁted)

MDP 14 05 221

271

D04

HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING

Note

•

For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).

Revision: 12-Sep-13

Document Number: 31511

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MDP 01, 03, 05

www.vishay.com

Vishay Dale

DIMENSIONS in inches (millimeters)

0.310 0.010

(7.87 0.254)

0.120 0.005

(3.05 0.127)

0.010 (0.254)

0.250 0.005

(6.35 0.127)

0.030

(0.762) Typ.

Pin #1

Identification

0.010 + 0.005

- 0.002

(0.254 + 0.127

- 0.051)

0.130 + 0.015

0.075 0.015

(1.90 0.381)

0.018 0.003

(0.457 0.076)

- 0.010

(3.30 + 0.381

- 0.254)

Pin #1

0.290 Min.

0.320 Nom.

0.360 Max.

(7.37 Min.

8.13 Nom.

9.14 Max.)

0.100 0.010

(2.54 0.254)

Non-Accumulative Tol.

"C" Spaces

0.010 (0.254)

0.050 0.005

(1.27 0.127)

GLOBAL MODEL

MDP 14

0.750 (19.05)

0.850 (21.59)

0.600 (15.24)

0.700 (17.78)

MDP 16

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

MDP14

1.73

MDP16

Package Power Rating (Maximum at +70 °C)

Voltage Coefficient of Resistance

Dielectric Strength

V_eff

V_AC



1.92

< 50 ppm typical

200

Insulation Resistance

> 10 000M minimum

-55 to +125

Operating Temperature Range

Storage Temperature Range

°C

-55 to +150

MECHANICAL SPECIFICATIONS

Marking Resistance to Solvents

Permanency testing per MIL-STD-202, method 215

Per MIL-STD-202, method 208E

Molded epoxy

Solderability

Body

Terminals

Weight

Solder plated leads

14 pin = 1.3 g; 16 pin = 1.5 g

IMPEDANCE CODES

CODE

500B

750B

800C

990A

101C

111C

121B

121C

131A

R₁()

R₂()

130

200

210

260

240

270

390

270

330

CODE

141A

181A

191A

221B

281B

381B

501C

102A

202B

R₁()

270

330

560

620

1.5K

R₂()

270

120

130

160

180

220

390

470

680

560

1.2K

2.7K

3.3K

6.2K

Note

For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530).

•

Revision: 12-Sep-13

Document Number: 31511

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MDP 01, 03, 05

www.vishay.com

Vishay Dale

CIRCUIT APPLICATIONS

01 Schematic

13 and 15 resistors with one pin common

The MDPXX01 circuit provides a choice of 13 and 15 nominally equal

resistors, each connected between a common pin (14 and 16) and a

discrete PC board pin. Commonly used in the following applications:

• •

• • • • •

•

• TTL Input Pull-down

• MOS/ROM Pull-up/Pull-down

• Open Collector Pull-up

• “Wired OR” Pull-up

• Digital Pulse Squaring

• TTL Unused Gate Pull-up

• High Speed Parallel Pull-up

MDP1401

MDP1601

Pin #1

• Power Driven Pull-up

03 Schematic

7 or 8 isolated resistors

The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,

each resistor isolated from all others and wired directly across.

Commonly used in the following applications:

• Long-line Impedance Balancing

• LED Current Limiting

• ECL Output Pull-down

• TTL Input Pull-down

• “Wired OR” Pull-up

• Power Driven Pull-up

• Powergate Pull-up

• Line Termination

MDP1403

MDP1603

Pin #1

05 Schematic

TTL dual-line terminator; pulse squaring

The MDPXX05 circuit contains 12 and 14 series pair of resistors. Each

series pair is connected between ground and a common line. The

junction of these resistor pairs is connected to the input terminals. The

05 circuits are designed for TTL dual-line termination and pulse

squaring.

R2 R2



MDP1405, MDP1605

Pin #1

Note

Standard E24 resistance values stocked. Consult factory.

•

DERATING

16 Pin Package

14 Pin Package

3.00

2.70

Single Resistor

0.380

0.190

01 and 05

- 50

+ 25

+ 70

+ 125 + 150

Ambient Temperature °C

Revision: 12-Sep-13

Document Number: 31511

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MDP 01, 03, 05

www.vishay.com

Vishay Dale

PERFORMANCE

MAX. R

(TYPICAL TEST LOTS)

TEST

CONDITIONS

1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h

4 h at +25 °C ambient temperature

Power Conditioning

Thermal Shock

0.50 ꢀ R

0.25 ꢀ R

0.50 ꢀ R

0.25 ꢀ R

1.00 ꢀ R

0.25 ꢀ R

5 cycles between -65 °C and +125 °C

2.5 x rated working voltage 5 s

Short Time Overload

Low Temperature Operation

Moisture Resistance

Resistance to Soldering Heat

Shock

45 min at full rated working voltage at -65 °C

240 h with humidity ranging from 80 ꢀ RH to 98 ꢀ RH

Leads immersed in +350 °C solder to within 1/16" of device body for 3 s

Total of 18 shocks at 100 g’s

Vibration

12 h at maximum of 20 g’s between 10 Hz and 2000 Hz

1000 h at +70 °C, rated power applied 1.5 h “ON,

0.5 h “OFF” for full 1000 h period. Derated according to the curve.

Load Life

Terminal Strength

Insulation Resistance

Dielectric Withstanding Voltage

4.5 pound pull for 30 s

10 000 M (minimum)

No evidence of arcing or damage (200 V_RMSfor 1 min)

Revision: 12-Sep-13

Document Number: 31511

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

MDP1403105KFE04 [VISHAY]

相关型号：

MDP1403107KFE04

MDP140310K0GE04

MDP140310K5FE04

MDP140310R0F

MDP140310R0FD04

MDP140310R0FE04

MDP140310R0GD04

MDP140310R0GE04

MDP140310R0JD04

MDP140310R0JE04

MDP140310R0SD04

MDP140310R0SE04