MCRL0100 [VISHAY]
Wirewound Resistors, Industrial Power, Tubular, Metal Case, MCRL;型号: | MCRL0100 |
厂家: | VISHAY |
描述: | Wirewound Resistors, Industrial Power, Tubular, Metal Case, MCRL |
文件: | 总4页 (文件大小:167K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCR
Vishay Milwaukee
www.vishay.com
Wirewound Resistors, Industrial Power, Tubular,
Metal Case, MCRL
FEATURES
• High power to size ratio
• Flameproof inorganic compound
• All welded construction
• Heat sink mountable to steel panel at least
10" x 10" x 0.04" (254 mm x 254 mm x 1.02 mm)
• Heat transfer increased by use of thermally conductive
grease or epoxy
• Wirewound
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
POWER RATING
HISTORICAL
MODEL
RESISTANCE RANGE TOLERANCE TERMINAL
GLOBAL MODEL
WITH HEAT SINK WITHOUT HEAT SINK
Ω
ꢀ
STYLE
W
45
W
20
40
50
65
MCRL0045
MCRL0070
MCRL0100
MCRL0125
12M16
12M40
12M59
12M89
1.1 to 2750
0.2 to 22K
0.2 to 66K
0.25 to 76K
5, 10
5, 10
5, 10
5, 10
A
H
H
H
70
100
125
DIMENSIONS in inches (millimeters)
D
D
WEIGHT
(TYP.)
g
GLOBAL
A
B
C
DISTANCE BETWEEN
TERMINAL (REF.)
MODEL
MCRL0045
MCRL0070
MCRL0100
MCRL0125
1 (25.4)
1.438 (36.513)
3 (76.2)
1.875 (47.625)
3.375 (85.725)
4.563 (115.90)
6.438 (163.525)
5/16
1 1/4
2 7/16
4 1/8
0.312
1.25
2.44
4.12
33
77
2.5 (63.5)
3.688 (93.675)
5.562 (141.275)
4.125 (104.775)
6 (152.4)
108
185
TERMINAL STYLE in inches (millimeters)
A
D
A
C
D
C
Type A
B
Type H
B
DIMENSIONS
Width (A)
A (3/16" LUG)
0.1875 (4.7625)
0.375 (9.525)
0.13 (3.302)
H (1/4" SQC)
0.25 (6.35)
Height (B)
0.625 (15.875)
0.065 (1.651)
0.032 (0.8128)
Diameter (C)
Thickness (D)
0.02 (0.508)
Revision: 17-Jun-14
Document Number: 31834
1
For technical questions, contact: vishaymilwaukeeresistor@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCR
Vishay Milwaukee
www.vishay.com
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
RESISTOR CHARACTERISTICS
Power rating
W
20 to 125
Resistance range
Ω
0.2 to 76K
Resistance tolerance
TCR
%
ppm/°C
°C
5 for above 1 Ω, 10 for below 1 Ω
400, 180, 130, 20 (varies by wattage and resistance)
Operating temperature
Temperature rise
-40 to +300
°C
275 above an ambient of 25 °C
Maximum altitude
Short-term overload (surge)
Surge windings
f.a.s.l. (m.a.s.l.)
derate above 4921 f.a.s.l. (1500 m.a.s.l.)
10 x rated power for 5 s
available
Maximum working voltage
Insulation resistance
Dielectric voltage
(P x R)1/2
Ω
1M
VRMS
up to 1500 (upon request)
Creepage
inch (mm)
0.50 (12.7) typical
Terminal sleeves
available for all sizes, increases creepage distance for 600 V applications
Inductance
μH
lb
0.2 to 800 (varies by wattage and resistance)
Non-inductive winding
Terminal strength
available
n/a
Electrical or mechanical customization
available: www.vishay.com/doc?31859
DERATING CURVE
120
100
80
60
40
20
0
0
50
100
150
200
250
300
350
25
AMBIENT TEMPERATURE IN °C
MATERIAL SPECIFICATIONS
Element
copper-nickel, nickel-chrome, iron-chrome-aluminum
electrical porcelain
Core
Potting compound
Standard terminals
Part marking
electrical cement or special high temperature silicone
stainless steel
value, date code, MRC
Revision: 17-Jun-14
Document Number: 31834
2
For technical questions, contact: vishaymilwaukeeresistor@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCR
Vishay Milwaukee
www.vishay.com
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: MCRL007022K00JHB00 (MCRL0070 22K 5 ꢀ 1/4SQC B)
M
C
R
L
0
0
7
0
2
2
K
0
0
J
H
B
0
0
MODEL
(3 digits)
TYPE
(1 digit)
SIZE
(4 digits)
VALUE
(5 digits)
TOLERANCE
(1 digit)
TERMINAL
(1 digit)
PACKAGING
(1 digit)
SPECIAL
(2 digits)
MCR
L = Cement 0045 =
R = Decimal
K = Thousand
R1500 = 0.15 Ω
1K500 = 1.5 kΩ
J = 5.0 %
K = 10 %
A = 3/16" lug
(3/16L)
B = A extended
length (3/16XL)
H = 1/4" single
quick-connect
(1/4SQC)
B = Bulk
00 = Standard
NI = Non-inductive
SW = Surge winding
45 W
0100 =
100 W
Available Check datasheet
sizes:
0045
0070
0100
0125
for available
value range
Revision: 17-Jun-14
Document Number: 31834
3
For technical questions, contact: vishaymilwaukeeresistor@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明