MBRF1050HE3/45 [VISHAY]
DIODE 10 A, 50 V, SILICON, RECTIFIER DIODE, TO-220AC, ROHS COMPLIANT, PLASTIC, ITO-220AC, 2 PIN, Rectifier Diode;型号: | MBRF1050HE3/45 |
厂家: | VISHAY |
描述: | DIODE 10 A, 50 V, SILICON, RECTIFIER DIODE, TO-220AC, ROHS COMPLIANT, PLASTIC, ITO-220AC, 2 PIN, Rectifier Diode 局域网 功效 瞄准线 二极管 |
文件: | 总5页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MBR(F,B)1035 thru MBR(F,B)1060
www.vishay.com
Vishay General Semiconductor
Schottky Barrier Rectifier
FEATURES
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
TO-220AC
ITO-220AC
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 245 °C (for TO-263AB package)
2
2
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
1
1
MBR10xx
MBRF10xx
PIN 1
• AEC-Q101 qualified
PIN 1
CASE
PIN 2
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PIN 2
TO-263AB
K
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
2
1
MBRB10xx
PIN 1
K
HEATSINK
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
PIN 2
Molding compound meets UL 94-V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
10 A
35 V, 60 V
150 A
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
VF
0.57 V, 0.70 V
150 °C
TJ max.
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR1035
MBR1045
MBR1050
MBR1060
UNIT
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (Fig.1)
VRRM
35
45
50
60
V
A
IF(AV)
10
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
150
A
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
IRRM
dV/dt
TJ
1.0
0.5
Voltage rate of change (rated VR)
10 000
V/μs
°C
- 65 to + 150
- 65 to + 175
Operating junction and storage temperature range
TSTG
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
VAC
1500
V
Revision: 13-Jun-12
Document Number: 88669
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR(F,B)1035 thru MBR(F,B)1060
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MBR1535 MBR1545 MBR1550 MBR1560 UNIT
IF = 10 A
IF = 10 A
IF = 20 A
IF = 20 A
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
-
0.80
0.70
0.95
0.85
0.57
0.84
0.72
(1)
Maximum instantaneous forward voltage
VF
V
0.10
15
Maximum instantaneous reverse current
at DC blocking voltage
(2)
IR
Rated VR
mA
Notes
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
Pulse test: Pulse width 40 ms
(2)
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR
MBRF
4.0
MBRB
2.0
UNIT
Typical thermal resistance from juntion to case
RJC
2.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY DELIVERY MODE
MBR1045-E3/45
1.80
1.94
1.33
1.33
1.80
1.94
1.33
1.33
45
45
45
81
45
45
45
81
50/tube
50/tube
50/tube
800/reel
50/tube
50/tube
50/tube
800/reel
Tube
Tube
MBRF1045-E3/45
MBRB1045-E3/45
MBRB1045-E3/81
MBR1045HE3/45 (1)
MBRF1045HE3/45 (1)
MBRB1045HE3/45 (1)
MBRB1045HE3/81 (1)
Tube
Tape and reel
Tube
Tube
Tube
Tape and reel
Note
(1)
AEC-Q101 qualified
Revision: 13-Jun-12
Document Number: 88669
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR(F,B)1035 thru MBR(F,B)1060
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
12
100
Resistive or Inductive Load
10
8
TJ = 125 °C
10
1
0.1
TJ = 75 °C
6
TJ = 25 °C
4
MBR1035 - MBR1045
MBR1050 - MBR1060
0.01
0.001
2
0
MBR1035 - MBR1045
MBR1050 - MBR1060
0
50
100
150
0
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
175
150
125
100
75
10 000
1000
100
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
50
MBR1035 - MBR1045
MBR1050 - MBR1060
25
0.1
1
10
100
0.1
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
100
100
10
1
TJ = 150 °C
10
1
Pulse Width = 300 µs
1 % Duty Cycle
TJ = 25 °C
0.1
0.01
MBR1035 - MBR1045
MBR1050 - MBR1060
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 13-Jun-12
Document Number: 88669
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR(F,B)1035 thru MBR(F,B)1060
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
ITO-220AC
0.404 (10.26)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.415 (10.54) MAX.
0.384 (9.75)
0.154 (3.91) DIA.
0.185 (4.70)
0.076 (1.93) REF.
0.370 (9.40)
0.360 (9.14)
0.148 (3.74) DIA.
0.175 (4.44)
0.055 (1.39)
7° REF.
0.113 (2.87)
0.076 (1.93) REF.
0.045 (1.14)
0.103 (2.62)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.135 (3.43) DIA.
45° REF.
0.122 (3.08) DIA.
0.145 (3.68)
0.671 (17.04)
0.651 (16.54)
0.600 (15.24)
0.135 (3.43)
7° REF.
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
PIN
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.350 (8.89)
0.330 (8.38)
0.625 (15.87)
1
2
PIN
1.148 (29.16)
1.118 (28.40)
1
2
7° REF.
0.191 (4.85)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.560 (14.22)
0.057 (1.45)
0.045 (1.14)
PIN 1
PIN 2
0.045 (1.14)
0.530 (13.46)
CASE
0.105 (2.67)
0.095 (2.41)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.037 (0.94)
0.025 (0.64)
0.027 (0.68)
0.022 (0.56)
0.014 (0.36)
0.015 (0.38)
0.028 (0.71)
0.020 (0.51)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
0.190 (4.83)
Mounting Pad Layout
0.055 (1.40)
0.045 (1.14)
0.160 (4.06)
0.42 (10.66) MIN.
K
0.055 (1.40)
0.047 (1.19)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
0.624 (15.85)
1
K
2
0.591 (15.00)
0.670 (17.02)
0 to 0.01 (0 to 0.254)
0.591 (15.00)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.15 (3.81) MIN.
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.140 (3.56)
0.110 (2.79)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
Revision: 13-Jun-12
Document Number: 88669
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
MBRF1060
Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0
KERSEMI
MBRF1060-E3/45
DIODE 10 A, 60 V, SILICON, RECTIFIER DIODE, TO-220AC, ROHS COMPLIANT, PLASTIC, ITO-220AC, 2 PIN, Rectifier Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明