IRF9630S [VISHAY]
Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, SMD-220, 3 PIN;
| 型号： | IRF9630S |
| 厂家： | 
VISHAY |
| 描述： | Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, SMD-220, 3 PIN 开关 晶体管 |
| 文件： | 总8页 (文件大小：184K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
Power MOSFET
FEATURES
PRODUCT SUMMARY
• Surface mount
• Available in tape and reel
VDS (V)
DS(on) ()
Qg max. (nC)
-200
• Dynamic dV/dt rating
• Repetitive avalanche rated
• P-channel
R
VGS = -10 V
0.80
Available
Available
29
5.4
15
Qgs (nC)
gd (nC)
• Fast switching
• Ease of paralleling
Q
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
Configuration
Single
S
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
D2PAK (TO-263)
G
DESCRIPTION
Third generation power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and
cost-effectiveness.
D
G
S
D
The D2PAK (TO-263) is a surface mount power package
capable of accommodating die size up to HEX-4. It provides
the highest power capability and the lowest possible
on-resistance in any existing surface mount package. The
D2PAK (TO-263) is suitable for high current applications
because of its low internal connection resistance and can
dissipate up to 2.0 W in a typical surface mount application.
P-Channel MOSFET
ORDERING INFORMATION
Package
D2PAK (TO-263)
D2PAK (TO-263)
Lead (Pb)-free and Halogen-free
SiHF9630S-GE3
IRF9630SPbF
SiHF9630S-E3
SiHF9630STRL-GE3 a
IRF9630STRLPbF a
SiHF9630STL-E3 a
Lead (Pb)-free
Note
a. See device orientation.
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
-200
20
UNIT
Drain-Source Voltage
Gate-Source Voltage
VDS
V
VGS
T
C = 25 °C
-6.5
Continuous Drain Current
VGS at -10 V
ID
TC = 100 °C
-4.0
A
Pulsed Drain Current a
IDM
-26
Linear Derating Factor
0.59
0.025
500
W/°C
Linear Derating Factor (PCB mount) e
Single Pulse Avalanche Energy b
Avalanche Current a
EAS
IAR
mJ
A
-6.4
Repetitive Avalanche Energy a
EAR
7.4
mJ
Maximum Power Dissipation
T
C = 25 °C
74
PD
W
V/ns
°C
Maximum Power Dissipation (PCB mount) e
Peak Diode Recovery dV/dt c
TA = 25 °C
3.0
dV/dt
-5.0
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak temperature) d
TJ, Tstg
-55 to +150
300
for 10 s
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. VDD = -50 V, starting TJ = 25 °C, L = 17 mH, Rg = 25 , IAS = -6.5 A (see fig. 12).
c. ISD -6.5 A, dI/dt 120 A/μs, VDD VDS, TJ 150 °C.
d. 1.6 mm from case.
e. When mounted on 1" square PCB (FR-4 or G-10 material).
S16-0754-Rev. D, 02-May-16
Document Number: 91085
1
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYP.
MAX.
UNIT
Maximum Junction-to-Ambient
RthJA
RthJA
RthJC
-
62
Maximum Junction-to-Ambient
-
-
40
°C/W
(PCB mount) a
Maximum Junction-to-Case (Drain)
1.7
Note
a. When mounted on 1" square PCB (FR-4 or G-10 material).
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX. UNIT
Static
Drain-Source Breakdown Voltage
VDS
VDS/TJ
VGS(th)
IGSS
VGS = 0, ID = -250 μA
Reference to 25 °C, ID = -1 mA
VDS = VGS, ID = -250 μA
-200
-
-
-
V
V/°C
V
VDS Temperature Coefficient
-
-0.24
Gate-Source Threshold Voltage
Gate-Source Leakage
-2.0
-
-
-
-
-
-
-4.0
100
- 100
-500
0.80
-
VGS
VDS = -200 V, VGS = 0 V
VDS = -160 V, VGS = 0 V, TJ = 125 °C
VGS = -10 V
ID = -3.9 A b
VDS = -50 V, ID = -3.9 A b
=
20 V
-
-
nA
Zero Gate Voltage Drain Current
IDSS
μA
-
Drain-Source On-State Resistance
Forward Transconductance
Dynamic
RDS(on)
gfs
-
2.8
S
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Ciss
Coss
Crss
Qg
-
-
-
-
-
-
-
-
-
-
700
200
40
-
-
-
VGS = 0 V,
DS = -25 V,
f = 1.0 MHz, see fig. 5
V
pF
-
29
5.4
15
-
ID = -6.5 A, VDS = -160 V,
see fig. 6 and 13 b
Qgs
Qgd
td(on)
tr
V
GS = -10 V
-
nC
-
12
27
28
24
-
VDD = -100 V, ID = -6.5 A,
ns
Rg = 12 , RD = 15 , see fig. 10 b
Turn-Off Delay Time
Fall Time
td(off)
tf
-
-
D
Between lead,
Internal Drain Inductance
Internal Source Inductance
LD
-
4.5
-
6 mm (0.25") from
package and center of
die contact
nH
G
LS
Rg
-
7.5
-
-
S
Gate Input Resistance
f = 1 MHz, open drain
0.6
3.7
Drain-Source Body Diode Characteristics
MOSFET symbol
showing the
integral reverse
p - n junction diode
D
Continuous Source-Drain Diode Current
Pulsed Diode Forward Current a
IS
-
-
-
-
-6.5
-26
A
G
ISM
S
Body Diode Voltage
VSD
trr
TJ = 25 °C, IS = -6.5 A, VGS = 0 V b
-
-
-
-
-6.5
300
2.9
V
Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge
Forward Turn-On Time
200
1.9
ns
μC
TJ = 25 °C, IF = -6.5 A, dI/dt = 100 A/μs b
Qrr
ton
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. Pulse width 300 μs; duty cycle 2 %.
S16-0754-Rev. D, 02-May-16
Document Number: 91085
2
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
3.0
2.5
VGS
ID = - 6.5 A
VGS = - 10 V
Top
- 15 V
- 10 V
- 8.0 V
- 7.0 V
- 6.0 V
- 5.5 V
- 5.0 V
101
100
10-1
2.0
1.5
1.0
0.5
0.0
- 4.5 V
Bottom - 4.5 V
20 µs Pulse Width
TC = 25 °C
10-1
100
101
- 60 - 40 - 20
0
20 40 60
100 120 140 160
80
- VDS, Drain-to-Source Voltage (V)
91085_01
TJ, Junction Temperature (°C)
91085_04
Fig. 1 - Typical Output Characteristics, TC = 25 °C
Fig. 4 - Normalized On-Resistance vs. Temperature
1200
VGS
VGS = 0 V, f = 1 MHz
Top
- 15 V
- 10 V
- 8.0 V
- 7.0 V
- 6.0 V
- 5.5 V
- 5.0 V
- 4.5 V
Ciss = Cgs + Cgd, Cds Shorted
Crss = Cgd
Coss = Cds + Cgd
101
1000
800
600
400
200
0
Ciss
- 4.5 V
Bottom
100
Coss
Crss
20 µs Pulse Width
TC = 150 °C
10-1
10-1
100
101
100
101
- VDS, Drain-to-Source Voltage (V)
91085_02
- VDS, Drain-to-Source Voltage (V)
91085_05
Fig. 2 - Typical Output Characteristics, TC = 150 °C
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
20
ID = - 6.5 A
V
DS = - 160 V
DS = - 100 V
DS = - 40 V
16
101
V
150 °C
25 °C
V
12
8
100
4
20 µs Pulse Width
For test circuit
see figure 13
V
DS = - 50 V
0
4
5
6
7
8
9
10
0
10
25
30
5
15
20
91085_03
- VGS, Gate-to-Source Voltage (V)
QG, Total Gate Charge (nC)
91085_06
Fig. 3 - Typical Transfer Characteristics
S16-0754-Rev. D, 02-May-16
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
Document Number: 91085
3
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
101
100
10-1
150 °C
25 °C
VGS = 0 V
4.5
3.5
0.5
1.5
2.5
25
50
75
100
125
150
- VSD, Source-to-Drain Voltage (V)
91085_07
TC, Case Temperature (°C)
91085_09
Fig. 7 - Typical Source-Drain Diode Forward Voltage
Fig. 9 - Maximum Drain Current vs. Case Temperature
RD
103
5
VDS
Operation in this area limited
by RDS(on)
VGS
2
D.U.T.
102
Rg
-
+
VDD
5
10 µs
2
- 10 V
10
100 µs
1 ms
Pulse width ≤ 1 µs
Duty factor ≤ 0.1 %
5
2
1
5
Fig. 10a - Switching Time Test Circuit
td(on) tr td(off) tf
10 ms
TC = 25 °C
TJ = 150 °C
Single Pulse
2
VGS
0.1
2
5
2
5
2
5
2
5
0.1
1
10
102
103
10 %
- VDS, Drain-to-Source Voltage (V)
91085_08
Fig. 8 - Maximum Safe Operating Area
90 %
VDS
Fig. 10b - Switching Time Waveforms
10
1
D = 0.5
0.2
0.1
PDM
0.05
0.1
t1
0.02
0.01
t2
Single Pulse
(Thermal Response)
Notes:
1. Duty Factor, D = t1/t2
2. Peak Tj = PDM x ZthJC + TC
10-2
10-5
10-4
10-3
10-2
0.1
1
10
t1, Rectangular Pulse Duration (s)
91085_11
Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
S16-0754-Rev. D, 02-May-16
Document Number: 91085
4
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
L
VDS
QG
Vary tp to obtain
required IAS
- 10 V
QGS
QGD
R g
D.U.T.
IAS
-
V
+
DD
VG
- 10 V
0.01 Ω
tp
Charge
Fig. 12a - Unclamped Inductive Test Circuit
Fig. 13a - Basic Gate Charge Waveform
Current regulator
Same type as D.U.T.
IAS
50 kΩ
12 V
0.2 µF
VDS
0.3 µF
-
V
+
DS
D.U.T.
VDD
tp
VGS
VDS
- 3 mA
IG
ID
Fig. 12b - Unclamped Inductive Waveforms
Current sampling resistors
Fig. 13b - Gate Charge Test Circuit
1200
ID
Top
- 2.9 A
- 4.1 A
1000
800
600
400
200
0
Bottom - 6.5 A
VDD = - 50 V
25
125
75
100
150
50
91085_12c
Starting TJ, Junction Temperature (°C)
Fig. 12c - Maximum Avalanche Energy vs. Drain Current
S16-0754-Rev. D, 02-May-16
Document Number: 91085
5
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF9630S, SiHF9630S
www.vishay.com
Vishay Siliconix
Peak Diode Recovery dV/dt Test Circuit
D.U.T.
+
Circuit layout considerations
• Low stray inductance
• Ground plane
• Low leakage inductance
current transformer
-
+
-
+
-
Rg
+
-
• dV/dt controlled by Rg
• ISD controlled by duty factor “D”
• D.U.T. - device under test
VDD
Note
• Compliment N-Channel of D.U.T. for driver
Driver gate drive
P.W.
Period
Period
D =
P.W.
VGS = - 10 Va
D.U.T. lSD waveform
Reverse
recovery
current
Body diode forward
current
dI/dt
D.U.T. VDS waveform
Diode recovery
dV/dt
VDD
Re-applied
voltage
Body diode forward drop
Inductor current
ISD
Ripple ≤ 5 %
Note
a. VGS = - 5 V for logic level and - 3 V drive devices
Fig. 14 - For P-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?91085.
S16-0754-Rev. D, 02-May-16
Document Number: 91085
6
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TO-263AB (HIGH VOLTAGE)
A
B
(Datum A)
3
4
A
A
E
c2
H
L1
4
Gauge
plane
0° to 8°
4
B
5
Detail A
Seating plane
D
H
L
C
C
A1
L3
L4
Detail “A”
1
2
3
L2
Rotated 90° CW
B
B
scale 8:1
A
2 x b2
2 x b
c
E
M
M
B
0.010
A
M
0.004
B
2 x e
Base
metal
5
D1
4
Plating
(c)
b1, b3
5
c1
(b, b2)
Lead tip
4
E1
Section B - B and C - C
Scale: none
View A - A
MILLIMETERS
INCHES
MILLIMETERS
INCHES
DIM.
A
MIN.
4.06
0.00
0.51
0.51
1.14
1.14
0.38
0.38
1.14
8.38
MAX.
4.83
0.25
0.99
0.89
1.78
1.73
0.74
0.58
1.65
9.65
MIN.
0.160
0.000
0.020
0.020
0.045
0.045
0.015
0.015
0.045
0.330
MAX.
0.190
0.010
0.039
0.035
0.070
0.068
0.029
0.023
0.065
0.380
DIM.
D1
E
MIN.
6.86
MAX.
MIN.
MAX.
-
10.67
-
0.270
0.380
0.245
-
0.420
-
A1
b
9.65
6.22
E1
e
b1
b2
b3
c
2.54 BSC
0.100 BSC
H
14.61
15.88
2.79
1.65
1.78
0.575
0.625
0.110
0.066
0.070
L
1.78
0.070
L1
L2
L3
L4
-
-
-
-
c1
c2
D
0.25 BSC
0.010 BSC
4.78
5.28
0.188
0.208
ECN: S-82110-Rev. A, 15-Sep-08
DWG: 5970
Notes
1. Dimensioning and tolerancing per ASME Y14.5M-1994.
2. Dimensions are shown in millimeters (inches).
3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the
outmost extremes of the plastic body at datum A.
4. Thermal PAD contour optional within dimension E, L1, D1 and E1.
5. Dimension b1 and c1 apply to base metal only.
6. Datum A and B to be determined at datum plane H.
7. Outline conforms to JEDEC outline to TO-263AB.
Document Number: 91364
Revision: 15-Sep-08
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
IRF9630SPBF
Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, TO-263, 3 PIN
INFINEON
IRF9630STRL
Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, TO-263, 3 PIN
INFINEON
IRF9630STRLPBF
TRANSISTOR 6.5 A, 200 V, 0.8 ohm, P-CHANNEL, Si, POWER, MOSFET, TO-263AB, ROHS COMPLIANT, TO-263, D2PAK-3, FET General Purpose Power
VISHAY
IRF9630STRR
Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, TO-263, 3 PIN
VISHAY
IRF9630STRR
Power Field-Effect Transistor, 6.5A I(D), 200V, 0.8ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, TO-263, 3 PIN
INFINEON
©2020 ICPDF网 联系我们和版权申明