HLM01510Z5K100JJ [VISHAY]
RESISTOR, WIRE WOUND, 15 W, 5 %, 30 ppm, 5100 ohm, CHASSIS MOUNT;型号: | HLM01510Z5K100JJ |
厂家: | VISHAY |
描述: | RESISTOR, WIRE WOUND, 15 W, 5 %, 30 ppm, 5100 ohm, CHASSIS MOUNT 电阻器 |
文件: | 总5页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HL, NHL FLAT and HLM, NHLM
Vishay Dale
Wirewound Resistors,
Industrial Power, Flat (HL), Miniature Flat (HLM)
FEATURES
• High temperature silicon coating
• Mounting accommodations ideally suited to
high density packaging
Pb-free
Available
• Self-stacking hardware for horizontal or vertical
placement
• Withstands high vibrations without loosening
• Mounting hardware functions as a heat sink
allowing greater heat dissipation and less
derating of stacked units
e3
RoHS*
TYPE HL FLAT STYLE
COMPLIANT
• Available in non-inductive styles (type NHL and NHLM)
with Aryton-Perry winding
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RANGE Ω
GLOBAL
HISTORICAL
MODEL
POWER RATING P25 °C
WEIGHT (typical)
g
MODEL
W
5 ꢀ
10 ꢀ
HL024
HL-24
1.0 - 11K
1.0 - 1.2K
1.0 - 26K
1.0 - 3K
1.0 - 54K
1.0 - 6.8K
1.0 - 77K
1.0 - 9.4K
0.10 - 11K
1.0 - 1.2K
0.10 - 26K
1.0 - 3K
0.10 - 54K
1.0 - 6.8K
0.10 - 77K
1.0 - 9.4K
30
40
55
70
95
20.14
30.07
51.25
60.48
76.51
NHL024
NHL-24
HL035
NHL035
HL055
NHL055
HL070
NHL070
HL095
NHL095
HL-35
NHL-35
HL-55
NHL-55
HL-70
NHL-70
HL-95
NHL-95
1.0 - 99.9K
1.0 -12.4K
0.10 - 99.9K
1.0 - 12.4K
TYPE HLM MINIATURE FLAT STYLE
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RANGE Ω
GLOBAL
HISTORICAL
MODEL
POWER RATING P25 °C
WEIGHT (typical)
g
MODEL
W
5 ꢀ
10 ꢀ
HLM010
HLM-10
1.0 - 15K
1.0 - 1.8K
1.0 - 26K
1.0 - 3.6K
1.0 - 71K
1.0 - 9.8K
0.10 - 15K
1.0 - 1.8K
0.10 - 26K
1.0 - 3.6K
0.10 - 71K
1.0 - 9.8K
10
15
20
0.41
0.47
0.74
NHLM010
NHLM-10
HLM015
NHLM015
HLM020
NHLM020
HLM-15
NHLM-15
HLM-20
NHLM-20
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NHLM01010Z10R00JJ (preferred part number format)
N
H
L
M
0
1
0
1
0
Z
1
0
R
0
0
J
J
GLOBAL
MODEL
TERMINAL
DESIGNATION
TERMINAL RESISTANCE
TOLERANCE
PACKAGING CODE
SPECIAL
FINISH
VALUE
NHLM010
09
10
16
E = Lead
(Pb)-free
Z = Tin/lead
N = Nickel
R = Decimal
K = Thousand
10R00 = 10.0 Ω
1K000 = 1 kΩ
J = 5.0 ꢀ
E = Lead (Pb)-free skin pack
J* = Skin pack (J01)
(Dash Number)
(up to 2 digits)
From 1 - 99
K = 10.0 ꢀ
(See “Standard
Electrical
Specifications”
table above for
additional P/N’s)
* Tin/lead for type “Z”, lead (Pb)-free for type “N”
as applicable
Historical Part Number Example: NHLM-10-10Z 10 Ω 5 ꢀ J01 (will continue to be accepted)
NHLM-10
10Z
10 Ω
5 ꢀ
J01
HISTORICAL MODEL
TERMINAL/FINISH
RESISTANCE VALUE
TOLERANCE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
72
For technical questions, contact: ww2bresistors@vishay.com
Document Number: 30209
Revision: 13-Jul-07
HL, NHL FLAT and HLM, NHLM
Wirewound Resistors,
Industrial Power, Flat (HL), Miniature Flat (HLM)
Vishay Dale
DIMENSIONS in inches [millimeters]
TYPE HL FLAT STYLE
DIMENSIONS in inches [millimeters]
DISTANCE
BETWEEN
TERMINALS
(REF.)
TERMINAL
DESIGNATION
A
0.063
[1.59]
B
C
0.031
[0.79]
MODEL
HL024
0.063
[1.59]
STANDARD OPTIONAL
0.625 [15.88]
1.250
2.500
2.000
0.718
[18.24]
1.468
09Z
09Z
09Z
09Z
09Z
16N
16N
16N
16N
16N
1.188 [30.16]
max.
NHL024 [31.75] [63.50] [50.80]
HL035 2.000 3.250 2.750
NHL035 [50.80] [82.55] [69.85]
HL055 3.500 4.750 4.250
NHL055 [88.90] [120.65] [107.95]
HL070 4.750 6.000 5.500
0.594 [15.08]
[37.29]
2.968
0.196 [4.98] Dia. typ.
A
B
[75.39]
4.218
0.563 0.030
[14.29 0.794]
0.438 0.030
[11.11 0.794]
C
NHL070 [120.65] [152.40] [139.70] [107.14]
HL095 6.000 7.250 6.750 5.468
NHL095 [152.40] [184.15] [171.45] [138.89]
0.313 [7.94] Dia.
TYPE HLM MINIATURE FLAT STYLE
0.126 [3.20] Dia. typ.
DIMENSIONS in inches [millimeters]
0.412
[10.46]
max.
DISTANCE
A
0.063
[1.59]
B
C
STANDARD
TERMINAL
DESIGNATION
MODEL
BETWEEN
TERMINALS
(REF.)
0.063
[1.59]
0.031
[0.79]
0.375 [9.52]
HLM010
0.750
1.312
[33.32]
1.562
1.000
[25.40]
1.250
0.406
[10.31]
0.656
A
B
10Z
10Z
10Z
NHLM010 [19.05]
HLM015 1.000
NHLM015 [25.40]
HLM020 2.062
0.343 [8.71]
max.
0.250 [6.35]
[39.67]
2.625
[31.75]
2.313
[16.66]
1.718
C
NHLM020 [52.37]
[66.68]
[58.75]
[43.64]
0.218 [5.54]
Dia. typ.
TERMINAL DIMENSIONS
DIMENSIONS in inches [millimeters]
DIMENSION
TERMINAL TYPE
TERM 09
TERM 10
0.125
[3.18]
0.188
[4.76]
0.063
[1.60]
0.020
[0.51]
TERM 16
0.188
[4.76]
0.500
[12.70]
0.104
[2.64]
0.020
[0.51]
0.188
[4.76]
0.563
[14.29]
0.050
[1.27]
0.020
[0.51]
A
C
D
A
B
C
D
A
C
D
Style 09
and 10
B
Style 16
B
TERMINAL FINISH
“E” Finish - 100 ꢀ Sn coated steel. “Z” Finish - 60/40 Sn/Pb coated
steel. “N” Finish - Nickel coated steel. Finish for terminal style 16 is
limited to nickel plated steel (N).
Document Number: 30209
Revision: 13-Jul-07
For technical questions, contact: ww2bresistors@vishay.com
www.vishay.com
73
HL, NHL FLAT and HLM, NHLM
Wirewound Resistors,
Industrial Power, Flat (HL), Miniature Flat (HLM)
Vishay Dale
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
HL, HLM RESISTOR CHARACTERISTICS
90 for 0.1 Ω to 0.99 Ω; 50 for 1 Ω to 9.9 Ω; 30 for 10 Ω and above
1000, from terminal to mounting hardware
10 x rated power for 5 s
Temperature Coefficient
Dielectric Withstanding Voltage
Short Time Overload
ppm/°C
VAC
-
Maximum Working Voltage
Insulation Resistance
V
(P x R)1/2
Ω
1000 MΩ minimum dry, 100 MΩ minimum after moisture test
- 55 to + 350
Operating Temperature Range
°C
POWER RATING
EXCLUSIVE BRACKET DESIGN
Vishay HL flat and HLM resistor wattage ratings are
based on mounting horizontally to 10" x 10" x 0.04"
[254.0 mm x 254.0 mm x 1.02 mm] steel plate in 25 °C
ambient with no air flow.
Mounting strap fits snugly through resistor core and is
bound against unit by two eccentric spacers. The bracket
eliminates expensive cements and improves heat transfer
and power handling capabilities.
MATERIAL SPECIFICATIONS
NHL, NHLM NON-INDUCTIVE
Element: Copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding.
They are identified by adding the letter N to the front of the
HL and HLM type designation (NHLM020, for example). For
NHL and NHLM models maximum resistance values are
lower, see STANDARD ELECTRICAL SPECIFICATIONS
table.
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “Z” terminals are tinned steel
Terminal Bands: Steel
Part Marking: DALE, model, wattage, value, tolerance, date
code
www.vishay.com
74
For technical questions, contact: ww2bresistors@vishay.com
Document Number: 30209
Revision: 13-Jul-07
HL, NHL FLAT and HLM, NHLM
Wirewound Resistors,
Industrial Power, Flat (HL), Miniature Flat (HLM)
Vishay Dale
Derating is required for ambient temperatures above 25 °C per the following graph.
120
100
80
60
40
20
0
- 65 - 50
0
50
150
250
350
25
AMBIENT TEMPERATURE IN °C
Derating
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Rated power applied until thermally stable,
then a minimum of 15 min at - 55 °C
Thermal Shock
(2.0 ꢀ + 0.05 Ω) ΔR
Short Time Overload
10 x rated power for 5 s
(2.0 ꢀ + 0.05 Ω) ΔR
(0.1 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(0.2 ꢀ + 0.05 Ω) ΔR
(0.2 ꢀ + 0.05 Ω) ΔR
(3.0 ꢀ + 0.05 Ω) ΔR
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
1000 Vrms, 1 min
- 55 °C for 24 h
250 h at + 350 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks
Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 h each
1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”
Shock, Specified Pulse
Vibration, High Frequency
Load Life
Document Number: 30209
Revision: 13-Jul-07
For technical questions, contact: ww2bresistors@vishay.com
www.vishay.com
75
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
HLM020
RESISTOR, WIRE WOUND, 20 W, 5; 10 %, 30; 50; 90 ppm, 0.1 ohm - 71000 ohm, CHASSIS MOUNT, LEAD/ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明