FS-20SCBE25R00JE [VISHAY]
RES 25 OHM 20W 5% WW RAD;
| 型号： | FS-20SCBE25R00JE |
| 厂家： | 
VISHAY |
| 描述： | RES 25 OHM 20W 5% WW RAD |
| 文件： | 总3页 (文件大小：141K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FS
www.vishay.com
Vishay Huntington
Wirewound Resistors, Industrial Power,
Silicone Coated, Printed Circuit Board Mount
FEATURES
• High temperature silicone coating
• Eliminates lead forming to keep parts off of PC
board
• Built in standoffs provide PC board heat
protection and opposing feet to avoid rocking
• Available in non-inductive style (special “NI”)
with Ayrton-Perry winding
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE
RANGE
RESISTANCE
RANGE
POWER RATING
WEIGHT
(typical)
g
GLOBAL
HISTORICAL
MODEL
P25 °C
MODEL
W
5 ꢀ
10 ꢀ
0.1 to 6K
FS-003
FS-05A
FS-005
FS-05S
FS-010
FS-10S
FS-020
FS-20S
FS-3
FS-5A
FS-5
3
5
1.0 to 6K
1.16
2.12
3.36
4.60
6.24
6.60
8.82
11.36
1.0 to 15K
1.0 to 17.5K
1.0 to 20.5K
1.0 to 29K
1.0 to 58K
1.0 to 60K
1.0 to 95K
0.1 to 15K
0.1 to 17.5K
0.1 to 20.5K
0.1 to 29K
0.1 to 58K
0.1 to 60K
0.1 to 95K
7
FS-5S
FS-10
FS-10S
FS-20
FS-20S
8
10
12
20
20
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
FS RESISTOR CHARACTERISTICS
260 for 20 and above, 400 for 1 to 19.99 ,
special TC’s available please contact factory
Temperature Coefficient
ppm/°C
Short Time Overload
-
VAC
V
10 x rated power for 5 s
1000, from terminal to mounting hardware
(P x R)1/2
Dielectric Withstanding Voltage
Maximum Working Voltage
Operating Temperature Range
°C
-55 to +350
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: FS-010CBE1K000JE (visit www.vishay.net SAP parts manual for all options)
F
S
-
0
1
0
C
B
E
1
K
0
0
0
J
E
TERMINAL
DESIGNATION
(2 digits)
TERMINAL
FINISH
(1 digit)
GLOBAL MODEL
(6 digits)
VALUE
(5 digits)
TOLERANCE
(1 digit)
PACKAGING CODE
(1 digit)
SPECIAL
(up to 2 digits)
(see Standard
Electrical
Specifications
Global Model
column for
options)
CB
E = lead
(Pb)-free
R = decimal
K = thousand
1R500 = 1.5
1K500 = 1.5 k
J = 5 ꢀ
K = 10 ꢀ
E = lead (Pb)-free
cell and bulk pack
(dash number)
from 1 to 99 as
applicable
NI = non-inductive
Historical Part Number example: FS-10-1K-5 ꢀ
FS-10
1K
5 ꢀ
TOLERANCE
HISTORICAL MODEL
RESISTANCE VALUE
SPECIAL
Revision: 03-Apr-2019
Document Number: 31845
1
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FS
www.vishay.com
Vishay Huntington
DIMENSIONS in inches [millimeters]
Note
•
Recommended mounting hole is 0.078 diameter.
DIMENSIONS in inches [millimeters]
CORE
C
0ꢁ0ꢂ2
1ꢁ5ꢃ7
STANDARD MOUNTING
CENTERS
MODEL
D
MAXꢁ
E
MAXꢁ
F
A
0ꢁ0ꢂ2
1ꢁ5ꢃ7
B
0ꢁ0ꢄ1
0ꢁꢃ.7
MAXꢁ
[
0ꢁ015 [ 0ꢁꢄ.17
[
[
FS-003
FS-002
1.000
[25.4]
0.200
[5.08]
0.360
[9.14]
0.450
[11.43]
0.281
[7.14]
0.400
[10.16]
0.600
[15.24]
1.125
[28.58]
0.200
[5.08]
0.360
[9.14]
0.450
[11.43]
0.281
[7.14]
0.400
[10.16]
0.900
[22.86]
FS-05A
FS-005
FS-006
1.000
[25.4]
0.312
[7.94]
0.360
[9.14]
0.600
[15.24]
0.410
[10.41]
0.500
[12.7]
0.600
[15.24]
1.125
[28.58]
1.750
[44.45]
2.125
[53.98]
0.312
[7.94]
0.312
[7.94]
0.312
[7.94]
0.360
[9.14]
0.360
[9.14]
0.360
[9.14]
0.600
[15.24]
0.600
[15.24]
0.600
[15.24]
0.410
[10.41]
0.410
[10.41]
0.410
[10.41]
0.500
[12.7]
0.500
[12.7]
0.500
[12.7]
0.900
[22.86]
1.300
[33.02]
1.700
[43.18]
FS-05S
FS-010
FS-10S
FS-015
FS-020
2.000
[50.8]
0.437
[11.11]
0.19
[4.82]
0.725
[18.41]
0.531
[13.49]
0.531
[13.49]
1.700
[43.18]
2.375
[60.325]
0.437
[11.11]
0.19
[4.82]
0.725
[18.41]
0.531
[13.49]
0.531
[13.49]
2.200
[55.88]
FS-20S
Notes
•
•
The pin configuration on the terminals for the FS-10S and smaller products is on the center of the terminal.
The pin configuration on the terminals for the FS-015 and larger products is on the edge of the terminal
MATERIAL SPECIFICATIONS
DERATING
120
Element: copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
100
80
60
40
20
Core: ceramic, steatite
Coating: special high temperature silicone
Standard Terminals: tinned alloy 42
Terminal Bands: alloy 42
Part Marking: HEI, model, wattage, value, tolerance, date
code
NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Ayrton-Perry) winding.
They are identified by adding the letters “NI” to the end of
the part number in the special section. For non-inductive
models the maximum resistance values are one-half the
standard part.
0
- 55 - 50
0
50
150
250
350
25
AMBIENT TEMPERATURE IN °C
Revision: 03-Apr-2019
Document Number: 31845
2
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明