F17724822004 [VISHAY]
Film Capacitor, RADIAL LEADED, ROHS COMPLIANT;
| 型号： | F17724822004 |
| 厂家： | 
VISHAY |
| 描述： | Film Capacitor, RADIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总12页 (文件大小：128K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
Interference Suppression Film Capacitors
MKT Radial Potted Type
FEATURES
• 15 mm to 37.5 mm lead pitch
• AEC-Q200 qualified for C 470 nF
• Supplied loose in box, taped on reel
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
High stability grade for continuous across the
line X2 applications.
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
E12 series 0.01 μF to 2.2 μF
preferred values acc. to E6
Capacitance range (E12 series)
Capacitance tolerance
Rated AC voltage
10 %, 20 % ( 5 % on request)
310 VAC; 50 Hz to 60 Hz
800 VDC at 85 °C
630 VDC at 110 °C
Permissible DC voltage
Climatic testing class acc. to IEC 60068-1
Maximum application temperature
40/110/56/C
110 °C
IEC 60384-14 ed-3 and EN 60384-14
IEC 60065 pass. flamm. class C
CSA-E384-14
Reference standards
UL 60384-14
Dielectric
Polyester film
Metallized
Electrodes
Series construction
Construction
Encapsulation
Leads
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type;
code for dielectric material; manufacturer location; manufacturer’s logo;
year and week; safety approvals
Marking
Note
•
For more detailed data and test requirements, contact rfi@vishay.com
DIMENSIONS in millimeters
l
w
h
lt
Pitch
P
ꢀ0.
Ø dt
Revision: 22-Aug-12
Document Number: 28161
1
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
COMPOSITION OF CATALOG NUMBER
CAPACITANCE
MULTIPLIER
(numerically)
(nF)
ꢀ01
1
2
3
.
5
Example:
.68 = 68ꢀ nF
1ꢀ
1ꢀꢀ
F 1772 X XX X X X X
TYPE
PACKAGING (Taped on reel) (1)
PACKAGING (Loose)
Code
229ꢀ
2291
296ꢀ
2261
29ꢀꢀ
29ꢀ1
297ꢀ
2971
Code details Tolerance
Code
Code details
Tolerance
1ꢀ ꢁ
1ꢀ ꢁ
1ꢀ ꢁ
H: 1605 mm
H: 1805 mm
H: 1605 mm
H: 1805 mm
H: 1605 mm
H: 1805 mm
H: 1605 mm
H: 1805 mm
2ꢀ ꢁ
2ꢀ ꢁ
2ꢀ ꢁ
2ꢀ ꢁ
1ꢀ ꢁ
1ꢀ ꢁ
1ꢀ ꢁ
1ꢀ ꢁ
2ꢀꢀ./216.
2ꢀꢀꢀ/216ꢀ
2ꢀ15/2165
2ꢀ3ꢀ/2163
22ꢀ./226.
22ꢀꢀ/226ꢀ
2215/2265
223ꢀ/2263
Lead length . - 1 mm
Lead length 6 - 1 mm
Lead length 15 - 1 mm
Lead length 3ꢀ + 5 mm
Lead length . - 1 mm
Lead length 6 - 1 mm
Lead length 15 - 1 mm
Lead length 3ꢀ + 5 mm
1ꢀ ꢁ
2ꢀ ꢁ
2ꢀ ꢁ
2ꢀ ꢁ
2ꢀ ꢁ
Notes
•
(1)
For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
Taped on reel pitch 27.5 mm is not available
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
310 V
Rated AC voltage (URAC
)
Permissible DC voltage (URDC
)
630 V
Tangent of loss angle
100 x 10-4 at 1 kHz
Rated voltage pulse slope at (dU/dt)R 435 VDC
R between leads, for C 0.33 μF at 100 V; 1 min
RC between leads, C > 0.33 μF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
C 0.47 μF
100 V/μs
> 15 000 M
> 5000 s
> 30 000 M
2200 V; for 1 min
2150 V; for 1 min
2120 V; 1 min
110 °C
C > 0.47 μF
Withstanding (AC) voltage between leads and case
Maximum application temperature
Note
•
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28139
Revision: 22-Aug-12
Document Number: 28161
2
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
DIMENSIONS
SPQ
URAC
(V)
CAP.
(μF)
PITCH
(mm)
MASS (3)
(g)
ORDERING
(pieces)
w x h x l
CODE (1)(2)
MAX. (mm)
SHORT LEAD
dt = 0.60 mm 0.06 mmꢀ C-tol. = 10 %
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
15
15
15
15
15
15
15
15
15
15
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
6.0 x 12.0 x 17.5
6.0 x 12.0 x 17.5
1.4
1.4
1.4
1.4
1.4
1.4
1.4
2.0
2.0
2.0
750
750
750
750
750
750
750
500
500
500
F177231020..
F177231220..
F177231520..
F177231820..
F177232220..
F177232720..
F177233320..
F177233920..
F177234720..
F177235620..
dt = 0.80 mm 0.08 mmꢀ C-tol. = 10 %
0.068
0.082
0.10
0.12
0.15
0.15
0.18
0.22
0.22
0.27
0.33
0.33
0.39
0.47
0.47
0.56
0.68
0.68
0.82
1.0
15
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
7.0 x 16.5 x 26.0
7.0 x 16.5 x 26.0
10.0 x 16.5 x 17.5
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
13.5 x 22.5 x 18.0
10.0 x 19.5 x 26.0
11.0 x 21.0 x 31.0
12.0 x 22.0 x 26.0
11.0 x 21.0 x 31.0
11.0 x 21.0 x 31.0
15.5 x 26.5 x 26.5
13.0 x 23.0 x 31.0
13.0 x 23.0 x 31.0
15.5 x 26.5 x 26.5
15.0 x 25.0 x 31.5
14.5 x 24.5 x 41.5
18.0 x 28.0 x 31.0
15.5 x 28.5 x 41.5
15.5 x 28.5 x 41.5
21.0 x 31.0 x 31.0
18.0 x 32.5 x 41.5
2.4
2.7
450
300
325
300
300
235
235
235
200
170
185
170
125
110
125
125
110
110
110
110
100
80
F177236820..
F177238220..
F177241020..
F177241220..
F1772415216.
F177241520..
F177241820..
F1772422216.
F177242220..
F177242720..
F1772433216.
F177243320..
F177243920..
F17724472160
F177244720..
F177245620..
F1772468216.
F177246820..
F177248220..
F1772510216.
F177251020..
F177251220..
F1772515216.
F177251520..
F177251820..
F1772522216.
F177252220..
15
15
2.7
15
2.7
15
2.7
22.5
22.5
15
4.1
4.1
3.0
22.5
22.5
15
4.6
6.7
5.5
310
22.5
27.5
22.5
27.5
27.5
22.5
27.5
27.5
22.5
27.5
37.5
27.5
37.5
37.5
27.5
37.5
6.7
9.1
13.0
9.1
9.1
13.5
12.9
12.9
13.5
15.0
18.9
19.0
24.0
24.0
28.0
31.6
1.0
1.2
1.5
85
1.5
70
1.8
70
2.2
70
2.2
60
dt = 0.60 mm 0.06 mmꢀ C-tol. = 20 %
0.010
0.015
0.022
0.033
0.047
0.068
0.10
15
15
15
15
15
15
15
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
6.0 x 12.0 x 17.5
1.4
1.4
1.4
1.4
1.4
2.0
2.0
750
750
750
750
750
600
600
F177231022..
F177231522..
F177232222..
F177233322..
F177234722..
F177236822..
F177241022..
Revision: 22-Aug-12
Document Number: 28161
3
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
DIMENSIONS
SPQ
URAC
(V)
CAP.
(μF)
PITCH
(mm)
MASS (3)
(g)
ORDERING
(pieces)
w x h x l
CODE (1)(2)
MAX. (mm)
SHORT LEAD
dt = 0.80 mm 0.08 mmꢀ C-tol. = 20 %
0.15
0.15
0.22
0.22
0.33
0.33
0.47
0.47
0.68
0.68
1.0
15
8.5 x 15.0 x 17.5
6.0 x 15.5 x 26.0
10.0 x 16.5 x 17.5
7.0 x 16.5 x 26.0
13.5 x 22.5 x 18.0
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
9.0 x 19.0 x 31.5
12.0 x 22.0 x 26.0
11.0 x 21.0 x 31.0
15.5 x 26.5 x 26.5
15.0 x 25.0 x 31.5
18.0 x 28.0 x 31.5
14.5 x 24.5 x 41.5
21.0 x 31.0 x 31.0
15.5 x 28.5 x 41.5
2.7
3.3
325
260
300
235
185
190
170
160
110
125
110
100
85
F1772415226..
F177241522...
F1772422226..
F177242222...
F1772433226.
F177243322..
F1772447226..
F177244722..
F1772468226..
F177246822..
F1772510226..
F177251022..
F1772515226.
F177251522..
F1772522226.
F177252222..
22.5
15
4.5
22.5
15
4.1
5.5
22.5
22.5
27.5
22.5
27.5
22.5
27.5
27.5
37.5
27.5
37.5
5.3
6.7
310
6.8
13.4
12.9
13.5
15.0
19.0
18.9
28.0
24.0
1.0
1.5
1.5
80
2.2
70
2.2
70
Notes
(1)
These capacitors can be delivered on continuous tape and reel.
The ordering code is:
F1772-...-2900 at H = 16.5 mm
F1772-...-2901 at H = 18.5 mm
F1772-...-2970 at H = 16.5 mm
F1772-...-2971 at H = 18.5 mm
(2)
(3)
Further information about packaging quantities with different lead length and/or taped versions, see document “Packing Quantities”
www.vishay.com/doc?27608
Weight for short lead product only
• SPQ = Standard Packing Quantity
• For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed 3)
310 VAC
0.01 μF to 2.2 μF X2
40005079
UL 60384-14
310 VAC
310 VAC
310 VAC
0.01 μF to 2.2 μF X2
0.01 μF to 2.2 μF X2
0.01 μF to 2.2 μF X2
E354321
E354321
CSA-E 384-14
CB test-certificate
DE 1-40110/A1
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
Revision: 22-Aug-12
Document Number: 28161
4
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm; h = 0.1 mm
• For products with pitch = 37.5 mm, w = l = 0.7 mm; h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax0 = w + Δw
Eccentricity
CBA116
Imax0 = I + ΔI
hmax0 = h + Δh
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film
Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = - 25 °C to + 35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 22-Aug-12
Document Number: 28161
5
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
CHARACTERISTICS
1ꢀ1
1ꢀꢀ
6
1 kHz
.
2
max0
1ꢀ-1
ꢀ
- 2
typical
1ꢀ-2
1ꢀ-3
- .
- 6
min0
- 6ꢀ
- 2ꢀ
2ꢀ
6ꢀ Tamb (°C) 1ꢀꢀ
ꢀ0ꢀ5
1ꢀꢀ
ꢀ0ꢀ1
ꢀ01
ꢀ05 10ꢀ
50ꢀ 1ꢀ
5ꢀ
f (MHz)
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
1ꢀ2
1ꢀ3
1ꢀ2
1ꢀ1
3
2
1
1ꢀ1
1ꢀꢀ
X2
C ≤ ꢀ033 µF (curve 1)
ꢀ033 µF < C ≤ 102 µF (curve 2)
102 µF < C ≤ 202 µF (curve 3)
1ꢀ-1
1ꢀ1
1ꢀ2
1ꢀ3
1ꢀ.
1ꢀ2
1ꢀ3
1ꢀ.
1ꢀ5
f (Hz)
C (nF)
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
1ꢀ3
1ꢀ.
22ꢀꢀ nF
1ꢀꢀꢀ nF
1ꢀ3
1ꢀ2
.7ꢀ nF
1ꢀꢀ nF
.7 nF
1ꢀ2
1ꢀ1
1ꢀꢀ
1ꢀ nF
T
amb ≤ 11ꢀ °C
Tamb ≤ 11ꢀ °C
1ꢀ1
1ꢀ1
1ꢀ-1
1ꢀ1
1ꢀ2
1ꢀ3
1ꢀ.
1ꢀ5
1ꢀ2
1ꢀ3
1ꢀ.
1ꢀ5
f (Hz)
f (Hz)
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
Revision: 22-Aug-12
Document Number: 28161
6
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
1ꢀ5
1ꢀ.
1ꢀ3
1ꢀ2
6ꢀ
Tamb (°C) 1ꢀꢀ
- 6ꢀ
- 2ꢀ
2ꢀ
Insulation resistance as a function of ambient temperature (typical curve)
APPLICATION NOTES AND LIMITING CONDITIONS
• For X2 electromagnetic interference suppression where a higher stabililty grade is needed for continuous across the line
applications (50 Hz/60 Hz) with a maximum mains voltage of 310 VAC
.
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• For series impedance applications we refer to application note: www.vishay.com/doc?28153
• The maximum ambient temperature must not exceed 110 °C.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14
ed 3 and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapter “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
Revision: 22-Aug-12
Document Number: 28161
7
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: Cotton wool
Immersion time: 5 min 0.5 min
4.6 Rapid change of temperature
A = - 40 °C
B = + 110 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection
4.7 Vibration
Visual examination
No visible damage
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢀ
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/sꢀ
Duration of pulse: 11 ms
4.9.2 Final measurements
Visual examination
Capacitance
No visible damage
|C/C| 5 % of the value measured initally
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Specific Reference”
of this specification
Revision: 22-Aug-12
Document Number: 28161
8
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.11 Climatic sequence
Capacitance
4.11.1 Initial measurements
Measured in 4.4.2 and 4.9.2
Tangent of loss angle
Measured initally in C1A and C1B
4.11.2 Dry heat
Temperature: 110 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db, first cycle
4.11.4 Cold
Temperature: - 40 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db, remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.11.1
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.11.1
Voltage proof
No permanent breakdown or flash-over
1350 VDC 1 min between terminations
50 % of values specified in section
“Insulation Resistance” of this specification
Insulation resistance
SUB-GROUP C2
4.12 Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements
4.12.3 Final measurements
Capacitance
Tangent of loss angle: 1 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.12.1
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.12.1
Voltage proof
No permanent breakdown or flash-over
1350 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 22-Aug-12
Document Number: 28161
9
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C3
CONDITIONS
PERFORMANCE REQUIREMENTS
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.13 Impulse voltage
3 successive impulses, full wave, peak
voltage:
No self healing breakdowns or flash-over
X2: 2.5 kV for C 1 μF
X2: 2.5 kV/C for C > 1 μF
Max. 24 pulses
4.14 Endurance
Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased to
1000 V (RMS) for 0.1 s via resistor of
47 5 %
4.14.7 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 5 % compared to values measured
in 4.13.1
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.13.1
Voltage proof
No permanent breakdown or flash-over
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations and
case
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge
10 000 cycles
Charged to 435 VDC
Discharge resistance:
435 VDC
------------------------------------------
R =
1.5 x CdU dt
4.15.1 Initial measurements
4.13.3 Final measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
Capacitance
|C/C| 10 % compared to values measured
in 4.15.1
Tangent of loss angle
Increase of tan
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.15.1
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 22-Aug-12
Document Number: 28161
10
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C5
CONDITIONS
PERFORMANCE REQUIREMENTS
4.16 Radio frequency characteristic
Resonance frequency
0.9 times the value as specified in section
“Resonant Frequency” of this specification.
SUB-GROUP C6
4.17 Passive flammability
Class C
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 30 s. No burning particle must drop from
the sample.
Test duration for actual volume V in mmꢁ:
V 250: 5 s
250 < V 500: 10 s
500 < V 1750: 20 s
V > 1750: 30 s
One flame application
12 mm
~ 8 mm
.50ꢀ°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 2.5 kV discharges on the test
The cheese cloth around the capacitors shall
not burn with a flame.
capacitor connected to URAC
.
No electrical measurements are required.
Revision: 22-Aug-12
Document Number: 28161
11
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
F17724822901
Film Capacitor, Polyester, 630V, 10% +Tol, 10% -Tol, 0.82uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
VISHAY
F1772510202000
CAPACITOR, METALLIZED FILM, POLYESTER, 1 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
F1772510202900
CAPACITOR, METALLIZED FILM, POLYESTER, 1 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
F17725102160
Interference Suppression Film Capacitor - Class X2 Radial MKT 310 VAC - High Stability Grade
VISHAY
©2020 ICPDF网 联系我们和版权申明