ER120-405 [VISHAY]
DC Filter Capacitors; 直流滤波电容器型号: | ER120-405 |
厂家: | VISHAY |
描述: | DC Filter Capacitors |
文件: | 总4页 (文件大小:397K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ER
Vishay ESTA
DC Filter Capacitors
RIPPLE
The sum of the peak ripple voltage and the DC voltage
should not exceed the rated voltage. Refer to graph fig. 1 for
permissible peak-to-peak ripple voltage as a percentage of
rated voltage for various frequencies.
30
20
%
P
E
10
0
TYPE ER
10
100
Fig. 1
1000
10 000
FREQUENCY Hz
Capacitors offer unusually good electrical characteristics,
coupled with very small size. The ER range of capacitors are
manufactured using a mixed dielectric material that consists
of polyester/polypropylene. The container is a rolled
seamed tinplate case that is hermetically sealed. The
construction is designed to prevent internal movement
when subjected to shock and vibration.
POWER FACTOR
The power factor is variable, and a function of temperature
and frequency. See fig 2. Nominal value < 0.5 % at 20 °C.
at 20 °C
Power Factor
vs.
Note
Temperature
2 %
•
The impregnant used is a non toxic highly refined, purified and
inhibited mineral oil.
1 kHz
1 %
50 Hz
APPLICATIONS
The ER range of capacitors are specifically designed for DC
applications.
0 %
65 80
- 20
0
40
Fig. 2
DIELECTRIC RESISTANCE
• Audio coupling
(Parallel resistance) is indicated by the graph of insulance
(MΩ x μF) vs temperature fig 3. The insulance (MΩ x μF) is
nominally 10 000 s at + 20 °C. (Measurements taken after
1 minute with an applied voltage of 500 V).
• Pulse forming networks
• Oscillator circuits
• Arc and spark suppression
• RF by-pass
105
• Tuned filters
104
• Energy storage
• Integrating circuits
• Low and high pass filters
• High voltage smoothing
103
Insulance vs. Temperature
Typical Values
102
- 40
0
40
80
Fig. 3
Capacitors required for AC applications and high discharge
rates can also be designed from the ER range.
LIFE EXPECTANCY
Consult Vishay Electronic GmbH, Division Roederstein
ESTA and Hybrids for your specific requirements.
ER type capacitors are designed for a life exceptancy of
50 000 h at 65 °C. To achieve the same life expectancy
at 85 °C derate to 60 % of rated voltage fig 4.
TEMPERATURE RANGE
Temperature range is - 55 °C to + 85 °C. The nominal
voltage rating is applicable from - 55 °C to + 85 °C.
105
104
103
Derating is required for higher operating temperatures.
TEMPERATURE COEFFICIENT
Capacitance will increase by 2 % per 100 °C temperature
change.
102
50
150 °C
Rated Voltage
100
Fig. 4
Document Number: 13013
Revision: 11-Aug-10
For technical questions, contact: esta@vishay.com
www.vishay.com
1
ER
Vishay ESTA
DC Filter Capacitors
CAPACITANCE RANGE
0.01 μF to 100 μF. The tolerance is 10 %. Other tolerances
are available on request. Nominal values measured at 1 kHz.
TYPE DESCRIPTION
CAP.
PART NUMBER
μF
A
B
C
D
E
1000 VDC WKG
VOLTAGE RANGE
ER10-104
ER10-504
ER10-105
ER10-405
ER10-605
ER10-106
ER10-256
ER10-506
1500 VDC WKG
ER15-104
ER15-504
ER15-205
ER15-405
ER15-805
ER15-106
ER15-126
ER15-256
ER15-506
2000 VDC WKG
ER20-104
ER20-254
ER20-504
ER20-105
ER20-205
ER20-405
ER20-605
ER20-106
ER20-126
ER20-206
3000 VDC WKG
ER30-104
ER30-504
ER30-105
ER30-105X
ER30-205
ER30-405
ER30-605
ER30-805
ER30-106
ER30-206
ER30-256
ER30-104
4000 VDC WKG
ER40-104
ER40-254
ER40-504
ER40-105
ER40-205
ER40-405
ER40-805
ER40-106
ER40-206
ER40-306
0.1
0.5
1.0
4.0
6.0
10.0
25.0
50.0
50
50
75
75
95
115
155
155
48
48
48
60
60
80
85
130
28
28
28
54
54
48
67
100
20
20
20
25
25
40
40
50
20
20
20
35
35
35
35
35
1000 VDC to 40 000 VDC other values on request.
TEST VOLTAGE
Terminal/terminal (Vt/t)
For DC rating < 20 kV
Vt/t = 2.0 x rated voltage 60 s
For DC rating > 20 kV
0.1
0.5
2.0
4.0
8.0
10.0
12.0
25.0
50.0
60
60
75
115
95
115
135
115
180
48
48
54
54
85
85
85
130
130
28
28
48
48
67
67
67
100
100
20
20
22
22
40
40
40
50
50
20
20
35
35
35
35
35
35
35
Vt/t = 1.5 x rated voltage 60 s
WEIGHT
The approximate weight in kg of capacitors in the ER range
can be estimated by multiplying the volume of the capacitor
container by 1.45 (1) x 10 -6
.
TERMINATIONS
Add suffix W to part No. To indicate wire terminations.
0.1
0.25
0.5
1.0
2.0
4.0
6.0
10.0
12.0
20.0
60
60
60
95
75
115
135
115
135
115
48
48
48
48
54
54
60
85
85
130
28
28
28
28
48
48
54
67
67
100
20
20
20
20
22
22
25
40
40
50
20
20
20
20
35
35
35
35
35
35
CAPACITANCE
Capacitance tolerance of 20 % is standard with those
marked (1)
.
FLASHOVER
Up to 5000 V rating, the capacitor terminals will withstand
125 % of the rated voltage without flashover at a pressure
of 85 mm Hg., equivalent to 50 000 feet altitude. Above
5000 V rating, the capacitor terminals will withstand 125 %
of the rated voltage at a pressure of 500 mg Hg, equivalent
to 10 000 feet altitude.
0.1
0.5
1.0
1.0
2.0
4.0
6.0
8.0
10.0
20.0
25.0
0.1
60
75
115
75
115
155
180
155
95
155
180
60
48
48
48
54
54
60
80
85
130
130
130
48
28
28
28
48
48
54
48
67
100
100
100
28
20
20
20
22
22
25
40
40
50
50
50
20
20
20
20
35
35
35
35
35
35
35
35
20
LIFE TESTS
Conducted at 85 °C for 500 h. The voltage applied will be
140 % of the rated voltage.
M6
0.1
0.25
0.5
1.0
2.0
4.0
8.0
10.0
20.0
30.0
60
75
95
48
48
48
54
54
28
28
28
48
48
20
20
20
22
22
40
50
50
50
50
20
20
20
35
35
35
35
35
35
35
1 mm
95
135
115
115
135
230
320
C
M
85
67
130
130
130
130
100
100
100
100
D
B
K
L
Fig. 5
www.vishay.com
2
For technical questions, contact: esta@vishay.com
Document Number: 13013
Revision: 11-Aug-10
ER
Vishay ESTA
DC Filter Capacitors
TYPE DESCRIPTION
TYPE DESCRIPTION
CAP.
μF
CAP.
μF
PART NUMBER
A
B
C
D
E
PART NUMBER
A
B
C
D
E
5000 VDC WKG
ER50-104
ER50-254
ER50-105
ER50-405
ER50-805
ER50-106
ER50-206
ER50-506
6000 VDC WKG
ER60-104
ER60-254
ER60-504
ER60-105
ER60-205
ER60-405
ER60-605
ER60-805
ER60-106
ER60-126
ER60-206
8000 VDC WKG
ER80-503
ER80-104
ER80-254
ER80-504
ER80-105
ER80-205
ER80-405
ER80-605
ER80-805
ER80-156
10 000 VDC WKG
ER100-503
ER100-104
ER100-504
ER100-105
ER100-205
ER100-405
ER100-605
ER100-805
ER100-156
12 000 VDC WKG
ER120-503
ER120-104
ER120-254
ER120-105
ER120-205
ER120-405
15 000 VDC WKG
ER150-103
ER150-203
ER150-503
ER150-104
ER150-254
ER150-504
ER150-504X
ER150-105
ER150-205
20 000 VDC WKG
ER200-103
ER200-503X
ER200-104
ER200-254
ER200-504
ER200-105
ER200-205
ER200-405
25 000 VDC WKG
ER250-503
ER250-104X
ER250-254
ER250-504
30 000 VDC WKG
ER300-303
ER300-104
ER300-104X
ER300-504
ER300-105
40 000 VDC WKG
ER400-303
ER400-503
ER400-503X
0.1
0.25
1.0
60
48
48
28
28
20
20
22
40
50
50
50
75
20
20
35
35
35
35
35
35
0.05
0.10
0.25
1.0
75
85
85
67
67
40
40
40
75
75
75
60
60
60
60
60
60
75
100
105
145
240
280
115
155
135
155
290
295
54
48
85
67
4.0
85
67
130
130
190
100
100
120
8.0
130
130
130
180
100
100
100
180
2.0
10.0
20.0
50.0
4.0
(1)
(1)
(1)
(1)
0.01
0.02
0.05
0.10
0.25
0.50
0.50
1.0
60
60
60
60
54
54
60
60
60
60
60
60
60
60
60
(1)
(1)
0.1
0.25
0.5
65
54
54
48
48
35
35
35
35
35
35
35
35
35
35
60
85
60
54
80
105
125
190
105
160
190
80
48
100
100
100
135
180
250
290
345
180
80
48
40
40
50
50
50
50
50
50
125
85
67
40
40
75
75
75
1.0
85
67
85
67
2.0
130
130
130
130
130
130
220
100
100
100
100
100
100
164
130
130
159
100
100
120
4.0
6.0
2.0
8.0
10.0
12.0
20.0
(1)
0.01
0.05
0.1
70
80
85
48
67
60
60
85
40
40
105
190
160
300
250
305
85
67
60
0.25
0.5
85
67
40
60
(1)
(1)
(1)
(1)
0.05
0.1
58
65
60
60
54
54
60
60
60
60
60
60
60
60
60
60
130
130
180
240
100
100
180
180
75
60
1.0
75
60
0.25
0.5
85
60
54
2.0
90
100
100
140
120
120
200
270
345
280
60
54
4.0
100
1.0
85
67
40
50
50
50
50
75
2.0
130
130
130
130
180
100
100
100
100
180
(1)
0.05
0.1
110
95
85
67
70
70
70
70
4.0
130
130
130
100
100
100
65
65
65
6.0
0.25
0.5
130
250
8.0
15.0
(1)
(1)
0.03
0.1
0.1
0.5
1.0
120
200
120
315
295
85
85
67
67
70
70
0.05
0.1
0.5
1.0
2.0
4.0
6.0
8.0
15.0
58
80
80
48
48
40
54
40
40
50
50
50
75
75
60
60
60
60
60
60
60
60
60
65
130
130
180
100
100
180
65
65
75
70
140
160
140
260
350
300
350
80
48
70
85
67
100
130
130
130
190
180
100
100
100
120
180
(1)
(1)
0.03
0.05
0.05
160
210
125
85
85
67
67
70
70
70
130
100
65
Note
(1) These capacitors are fitted with one high voltage terminal and case terminal. An additional terminal for connection to case is
available as an optional extra. Add suffix M to part number.
Document Number: 13013
Revision: 11-Aug-10
For technical questions, contact: esta@vishay.com
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明