DFNA5-1T5 [VISHAY]
RES NETWORK 4 RES MULT OHM 8VDFN;型号: | DFNA5-1T5 |
厂家: | VISHAY |
描述: | RES NETWORK 4 RES MULT OHM 8VDFN |
文件: | 总3页 (文件大小:102K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DFN (Divider)
Vishay Dale Thin Film
www.vishay.com
Dual Flat No Lead Molded Precision Thin Film Divider,
Surface Mount Resistor Network
FEATURES
• 0.8 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 4 mm x 4 mm size 50 % board
savings over SOIC packages
• Low TCR 25 ppm, TCR tracking to 5 ppm
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DFN series of thin film precision dividers surface mount
resistor networks offer a wide ratio range that is listed in the
standard resistance offering table. The 4 mm x 4 mm
0.8 mm pitch dual flat no lead package feature 50 % savings
TYPICAL PERFORMANCE
in board space over traditional SOIC packages. The DFN
dividers are ideal for applications that require tight TC
tracking and ratio tolerances over temperature.
ABSOLUTE
25
TRACKING
5
TCR
TOL.
ABSOLUTE
0.1
RATIO
0.05
SCHEMATIC
8
1
7
6
5
4
STANDARD RESISTANCE OFFERING (R1/R2)
RATIO
100:1
50:1
25:1
20:1
10:1
5:1
R1
100K
50K
25K
20K
10K
10K
10K
R2
1K
1K
1K
1K
1K
2K
5K
R1
R2 R2 R1
2
3
2:1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Passivated nichrome
-
-
-
Pin/Lead Number
Resistance Range
TCR: Absolute
8
1000 to 100 k per element
25 ppm/ꢀC
-55 ꢀC to +125 ꢀC
TCR: Tracking
5 ppm/ꢀC
-55 ꢀC to +125 ꢀC
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
0.1 %
+25 ꢀC
0.05 %
+25 ꢀC
100 mW
Maximum at +70 ꢀC
100 mW x number of resistors
R 0.05 %
Maximum at +70 ꢀC
2000 h at +70 ꢀC
R 0.015 %
2000 h at +70 ꢀC
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
< 0.1 ppm/V
-
100 V max. not to exceed P x R
-55 ꢀC to +125 ꢀC
-55 ꢀC to +150 ꢀC
< - 30 dB
-
-
-
-
Thermal EMF
< 0.08 μV/ꢀC
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
1 year at + 25 ꢀC
1 year at + 25 ꢀC
R 0.002 %
Revision: 28-May-15
Document Number: 60110
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN (Divider)
Vishay Dale Thin Film
www.vishay.com
DIMENSIONS AND IMPRINTING in millimeters
3.500 0.050
Exposed Pad
4.000 0.050
8
5
0.300 0.050
0.800 BSC
(1) Part Number
5
6
7
8
to be 4 Characters
DFNA
xxxx
MMYY
2.700 0.050
Exposed Pad
4.000 0.050
4
3
2
1
Date
Code
(MMYY)
Pin 1 Indentification
Chamfer 0.300 x 45°
2.400
Ref.
1
4
Pin 1 Dot
by Marking
0.400 0.050
(4 mm x 4 mm)
BOTTOM VIEW
TOP VIEW
A
Max. 0.900
Nom. 0.850
A
0.000 - 0.050
0.203 Ref.
Min.
0.800
SIDE VIEW
Notes
(1)
100-1 resistance ratio part marking to be 100-
Contact factory for package outlines for higher pin count or custom configurations
(2)
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Passivated nichrome
Ceramic
Molded epoxy
Copper alloy
Terminals
Plating
100 % matte tin
Per MIL-PRF-914
Marking Resistance to Solvents
GLOBAL PART NUMBER INFORMATION
D
F
N
A
5
-
1
U
F
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
PACKAGING
DFNA
(Lead (Pb)-free)
(e3)
2-1
5-1
10-1
20-1
25-1
50-1
100-1
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (3)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Note
(3)
Preferred packaging code
Revision: 28-May-15
Document Number: 60110
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
DFNS1-KECPI155.52MHZXB100
PECL 100K Output Clock Oscillator, 155.52MHz Nom, ROHS COMPLIANT, SMD, 6 PIN
CTS
©2020 ICPDF网 联系我们和版权申明