CSC06A01103G [VISHAY]
RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP-6;
| 型号： | CSC06A01103G |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP-6 电阻器 |
| 文件： | 总4页 (文件大小：477K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CSC
Vishay Dale
Thick Film Resistor Networks
Single-In-Line, Coated SIP 01, 03, 05 Schematics
FEATURES
• 0.195" [4.95mm] "A", 0.250" [6.35mm] "B",
or 0.350" [8.89mm] "C" Profile maximum seated height
• "A" profile standard in 6 thru 10 pins
• Highly stable thick film
• Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C
• Reduces total assembly costs
• Resistor elements protected by tough epoxy conformal coating
• Wide resistance range
• Available in bag pack or tube pack
STANDARD ELECTRICAL SPECIFICATIONS
MODEL/
SCHEMATIC
PROFILE
RESISTOR
POWER RATING
Max. @ 70°C*
RESISTANCE
RANGE
Ω
STANDARD
TOLERANCE
%
TEMPERATURE
COEFFICIENT
(- 55°C to + 125°C) (- 55°C to + 125°C)
TCR
TRACKING
OPERATING
VOLTAGE
VDC Max.
CSC01
CSC03
CSC05
A
B
C
0.20 W
0.22 W
0.28 W
10 - 2.2M
10 - 2.2M
10 - 2.2M
± 2
± 2
± 2
± 100ppm/°C
± 100ppm/°C
± 100ppm/°C
± 50ppm/°C
± 50ppm/°C
± 150ppm/°C
100
100
100
A
B
C
0.30 W
0.37 W
0.50 W
A
B
C
0.25 W
0.28 W
0.35 W
* For resistor power ratings @ + 25°C see derating curves.
• See derating curves for Package Power Rating. Higher power rated “C” Profile available.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Veff
CSC Series
< 50ppm typical
200
Voltage Coefficient of Resistance
Dielectric Strength
VAC
Ω
Isolation Resistance (03 Schematic)
Operating Temperature Range
> 100M
°C
- 55 to + 125
ORDERING INFORMATION
01 and 03 Schematics
01
03
08
A
101
RESISTANCE
VALUE
CSC
MODEL
G
NUMBER OF
PINS
PACKAGE CODE
TOLERANCE
SCHEMATIC
First 2 digits are
significant figures.
Last digit specifies
number of zeros to
follow.
A = 0.195" [4.95mm] Height
0.100" [2.54mm] Lead Spacing
B = 0.250" [6.35mm] Height
0.100" [2.54mm] Lead Spacing
C = 0.350" [8.89mm] Height
0.100" [2.54mm] Lead Spacing
G= ± 2%
01 = Pin #1
common to all
resistors
03 = Isolated
resistors
05 Schematic
CSC
MODEL
A
08
05
221
RESISTANCE
VALUE R1
331
RESISTANCE
VALUE R2
G
PACKAGE CODE
NUMBER OF
PINS
SCHEMATIC
TOLERANCE
A = 0.195" [4.95mm] Height
0.100" [2.54mm] Lead Spacing
B = 0.250" [6.35mm] Height
0.100" [2.54mm] Lead Spacing
C = 0.350" [8.89mm] Height
0.100" [2.54mm] Lead Spacing
First two digits are significant
figures. The third digit
specifies the number of
zeros to follow.
G= ± 2%
www.vishay.com
34
For Technical Questions, contact: ff2aresistors@vishay.com
Document Number: 31509
Revision 25-Oct-00
CSC
Thick Film Resistor Networks, Single-In-Line, Coated SIP
Vishay Dale
DIMENSIONS in inches [millimeters]
A
Max.
0.098 [2.49] Max.
C
Max.
Pin
#1
0.130 ± 0.010
[3.30 ± 0.254]
0.045
[1.14]
0.012 ± 0.003
[0.305 ± 0.076]
(Leads are Along
Centerline of Body)
0.032
[0.813]
0.050 [1.27] Max.
0.018 ± 0.003
[0.457 ± 0.076]
0.100 ± 0.010 [2.54 ± 0.254]
Non-Accumulative
B
NUMBER OF
MODEL RESISTORS A (Maximum)
01 Schematic
B
C (Maximum)
CSC05
CSC06
CSC07
CSC08
CSC09
CSC10
CSC11*
4
5
0.490 [12.45] 0.400 [10.16]
0.590 [14.99] 0.500 [12.70]
0.690 [17.53] 0.600 [15.24]
0.790 [20.07] 0.700 [17.78]
0.890 [22.61] 0.800 [20.32]
0.990 [25.15] 0.900 [22.86]
"A" Profile = 0.195 [4.95]
"B" Profile = 0.250 [6.35]
"C" Profile = 0.350 [8.89]
6
7
8
1
2
3
n-1
n
9
10
1.09 [27.69]
1.00 [25.40]
03 Schematic
NUMBER OF
RESISTORS
MODEL
CSC06
CSC08
CSC10
A (Maximum)
B
C (Maximum)
"A" Profile = 0.195 [4.95]
3
4
5
0.590 [14.99] 0.500 [12.70]
0.790 [20.07] 0.700 [17.78]
0.990 [25.15] 0.900 [22.86]
"B" Profile = 0.250 [6.35]
"C" Profile = 0.350 [8.89]
1
2
3
4
n-1
n
NUMBER OF
RESISTORS
05 Schematic
B
MODEL
CSC05
CSC06
CSC07
CSC08
CSC09
CSC10
CSC11*
A (Maximum)
0.490 [12.45]
0.590 [14.99]
0.690 [17.53]
0.790 [20.07]
0.890 [22.61]
0.990 [25.15]
1.09 [27.69]
C (Maximum)
0.400 [10.16]
0.500 [12.70]
0.600 [15.24]
0.700 [17.78]
6
R2
R1
8
"A" Profile = 0.195 [4.95]
"B" Profile = 0.250 [6.35]
10
12
14
16
18
0.800 [20.32] "C" Profile = 0.350 [8.89]
0.900 [22.86]
1
2
3
n-1
n
1.00 [25.40]
* "B" and "C" Profiles only.
STOCKED RESISTANCE VALUES IN OHMS
(“G” TOLERANCE)
MECHANICAL SPECIFICATIONS
Marking Resistance
to Solvents:
Permanency testing per MIL-STD-
202, Method 215.
Solderability:
Per MIL-STD-202, Method 208E,
RMA flux.
Standard E-24 resistance values stocked. Consult factory.
Body:
High alumina, epoxy coated.
Copper alloy, tin-lead plated.
Many dual terminator resistance values stocked. Consult
factory
Terminals:
Document Number: 31509
Revision 25-Oct-00
For Technical Questions, contact: ff2aresistors@vishay.com
www.vishay.com
35
CSC
Vishay Dale
Thick Film Resistor Networks, Single-In-Line, Coated SIP
"A" Profile
"A" PROFILE + 70°C PACKAGE RATINGS
CSC10A Package
1.90
CSC10A
CSC09A
CSC08A
CSC07A
CSC06A
CSC05A
1.25 watts
1.12 watts
1.00 watts
0.87 watts
0.75 watts
0.62 watts
CSC08A Package
CSC06A Package
1.50
1.15
Single Resistor
03 Schematic
01 and 05 Schematics
.45
.30
- 50
+ 25
+ 70 + 125 + 150
Derating
Ambient Temperature °C
"B" Profile
"B" PROFILE + 70°C PACKAGE RATINGS
CSC10B Package
2.50
2.00
1.50
1.75 watts
1.60 watts
1.45 watts
1.30 watts
1.15 watts
1.00 watts
0.80 watts
0.60 watts
CSC11B
CSC10B
CSC09B
CSC08B
CSC07B
CSC06B
CSC05B
CSC04B
CSC08B Package
CSC06B Package
Single Resistor
03 Schematic
.60
.38
01 and 05 Schematics
- 50
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
"C" Profile
"C" PROFILE + 70°C PACKAGE RATINGS
CSC10C Package
3.30
2.60
2.00
2.30 watts
2.12 watts
1.90 watts
1.70 watts
1.50 watts
1.30 watts
1.00 watts
0.79 watts
CSC11C
CSC10C
CSC09C
CSC08C
CSC07C
CSC06C
CSC05C
CSC04C
CSC08C Package
CSC06C Package
Single Resistor
03 Schematic
.75
.45
01 and 05 Schematics
- 50
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
www.vishay.com
36
For Technical Questions, contact: ff2aresistors@vishay.com
Document Number: 31509
Revision 25-Oct-00
CSC
Thick Film Resistor Networks, Single-In-Line, Coated SIP
Vishay Dale
CIRCUIT APPLICATIONS
"A" Profile = 5, 7 and 9 resistors with one pin common
01 Schematic
The CSCxxx-01 single-in-line resistor networks provide the user with nomi-
nally equal resistors, each connected to a common pin (Pin No. 1). Com-
monly used in the following applications:
• "Wired OR" Pull-up
• Open Collector Pull-up
• TTL Input Pull-down
• Power Gate Pull-up
• MOS/ROM Pull-up/Pull-down
• TTL Unused Gate Pull-up
1
2
3
n-1
n
* "B" and "C" Profiles available. Odd pin available in 5, 7, 9, and 11.
"A" Profile = 2 through 5 isolated resistors
03 Schematic
The CSCxxx-03 single-in-line resistor networks provide the user with nomi-
nally equal resistors. Each resistor is isolated from all others. Commonly
used in the following applications:
• "Wired OR" Pull-up
• Long-Line Impedance Balancing
• LED Current Limiting
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
• ECL Output Pull-down
• TTL Input Pull-down
1
2
3
4
n-1
n
* "B" and "C" Profiles available.
05 Schematic
Pulse squaring and TTL dual-line terminators
R2
R1
The CSCxxx-05 circuits contain series pairs of resistors. Each series pair is
connected between two common lines. The junction of these resistor pairs
isconnectedtotheinputterminals. The05circuitsaredesignedforTTLdual-
line termination and pulse squaring.
* "B" and "C" Profiles available. Odd pin available in 5, 7, 9 and 11.
1
2
3
n-1
n
PERFORMANCE
CONDITIONS
MAX. ∆R (Typical Test Lots)
TEST
5 cycles between - 65°C and + 125°C
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 1.00% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 1.00% ∆R
Thermal Shock
2.5 x rated working voltage, 5 seconds
Short Time Overload
45 minutes at full rated working voltage at - 65°C
240 hours with humidity ranging from 80% RH to 98% RH
Leads immersed in + 350°C solder to within 1/16" of body for 3 seconds
Total of 18 shocks at 100 G's
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
12 hours at maximum of 20 G's between 10 and 2,000 Hz
Vibration
1,000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour
“OFF” for full 1000 hour period. Derated according to the curve.
Load Life
4.5 pound pull for 30 seconds
± 0.25% ∆R
Terminal Strength
10,000 Megohm (minimum)
—
—
Insulation Resistance
No evidence of arcing or damage (200 V RMS for 1 minute)
Dielectric Withstanding Voltage
Document Number: 31509
Revision 25-Oct-00
For Technical Questions, contact: ff2aresistors@vishay.com
www.vishay.com
37
相关型号：
CSC06A0110K0GEJ
RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP, ROHS COMPLIANT
VISHAY
CSC06A0110K0GEK
RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP, ROHS COMPLIANT
VISHAY
CSC06A011K00GEK
RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP, ROHS COMPLIANT
VISHAY
CSC06A01220KGEK
RESISTOR, NETWORK, FILM, BUSSED, 0.75 W, THROUGH HOLE MOUNT, SIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明