CRA06E08364K9FTA [VISHAY]
RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT;型号: | CRA06E08364K9FTA |
厂家: | VISHAY |
描述: | RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT 电阻器 |
文件: | 总4页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CRA06E, CRA06S
Vishay
Thick Film Resistor Array
FEATURES
• Convex terminal array available with either
scalloped corners (E version) or square corners
(S version)
• Wide ohmic range: 10R to 1M0
• 4 or 8 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with Lead (Pb)-free
and lead containing soldering processes
• Compatible with "Restriction of the use of Hazardous
Substances" (RoHS) directive 2002/95/EC (issue 2004)
CRA06E and CRA06S Thick Film resistor arrays are
constructed on a high grade ceramic body with convex
terminations. A small package enables the design of high
density circuits. The single component reduces board space,
component counts and assembly costs.
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE
P70 °C
MODEL
CIRCUIT
VOLTAGE MAX.
COEFFICIENT
ppm/K
RANGE
E-SERIES
V≅
%
Ω
W
100
200
1
24 + 96
24
0.063
50
10R - 1M0
CRA06E
CRA06S
03
2;
5
Zero-Ohm-Resistor available; Rmax. = 50 mΩ, Imax. = 1 A
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRA06E & S
Rated Dissipation at 70 °C (2)
Limiting Element Voltage (1)
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
W per element
0.063
50
100
V≅
Vdc/ac peak
°C
- 55 to + 155
> 109
Ω
Notes
(1)
(2)
Rated voltage: P × R
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rates dissipation applies only if the permitted film temperature of 155 °C is not exceed.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRA06S08347K0JTA (3)
C
R
A
0
6
S
0
8
3
4
7
K
0
J
T
A
CIRCUIT
TOLERANCE
PACKAGING (4)
SPECIAL
MODEL
VALUE
TERMINAL STYLE
PIN
CRA06
Up to 2 digits
S
E
04
08
3 = 03
R = Decimal
K = Thousand
F = 1 ꢀ
G = 2 ꢀ
TA
TC
M = Million
J = 5 ꢀ
0000 = 0 Ω Jumper
Z = 0 Ω Jumper
PRODUCT DESCRIPTION: CRA06S 08 03 473 J RT1 e3
03
473
J
CRA06S
08
RT1
e3
PACKAGING (4)
MODEL
TOLERANCE
TERMINAL COUNT
CIRCUIT TYPE
03
RESISTANCE VALUE
LEAD (Pb)-FREE
e3 = Pure tin
Termination finish
473 = 47 kΩ
4702 = 47 kΩ
10R0 = 10 Ω
100 = 10 Ω
000 = 0 Ω Jumper
F = 1 ꢀ
G = 2 ꢀ
J = 5 ꢀ
RT1
RT6
CRA06S
CRA06E
04
08
Z = 0 Ω Jumper
First two digits (3 for 1 ꢀ)
are significant. Last
digit is the multiplier.
Notes
(3) Preferred way for ordering products is by use of the PART NUMBER
(4) Please refer to table PACKAGING, see next page
www.vishay.com
252
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
Document Number: 31002
Revision: 13-Oct-08
CRA06E, CRA06S
Thick Film Resistor Array
Vishay
AVAILABLE TYPES AND RANGES
TEMPERATURE
MODEL
TERMINAL COUNT
CIRCUIT
TOLERANCE
COEFFICIENT
100 ppm/K
200 ppm/K
100 ppm/K
200 ppm/K
100 ppm/K
200 ppm/K
1 %
5 %; 2 %
1 %
04
08
08
03
CRA06S
03
03
5 %; 2 %
1 %
CRA06E
5 %; 2 %
PACKAGING
PACKAGING CODE
PAPER TAPE
PRODUCT DESCRIPTION
MODEL
TAPE WIDTH
DIAMETER
PITCH
PIECES/REEL
PART NUMBER
180 mm/7"
4 mm
4 mm
5000
TA
RT1
RT6
CRA06
8 mm
330 mm/13"
20 000
TC
CIRCUIT
120
100
80
03 CIRCUIT
60
40
20
8 pin
4 pin
0
- 55
- 25
0
25
50
75
70
100
125
155 175
Ambient Temperature in °C
Derating
DIMENSIONS
S-Version
E-Version
1
103
103
PIN 1
e
a
a
e
DIMENSIONS [in millimeters]
SOLDER PAD DIMENSIONS [in millimeters]
PIN
NO#
MODEL
L
A
A1
0.38 0.61
0.38
0.38 0.61
B
B*
0.3
0.3
0.3
P
T
W
MODEL
CRA06S
PINS
c
w
d
p
a
b
e
CRA06S
CRA06E
CRA06S
4
8
8
1.6
3.2
3.2
0.3
0.3
0.3
0.8
0.8
0.8
0.5
0.5
0.5
0.1
1.5
1.5
1.5
0.15
4
0.8
3.1
0.36
0.44
1.15
-
CRA06E
CRA06S
8
0.8
3.1
0.36
0.8
0.44
1.15
0.63
TOL. 0.15 0.15 0.15 0.15 0.15
0.1
Document Number: 31002
Revision: 13-Oct-08
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
www.vishay.com
253
CRA06E, CRA06S
Thick Film Resistor Array
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R) (1)
TEST
(clause)
CONDITIONS OF TEST
STABILITY
STABILITY
CLASS 2 OR BETTER
CLASS 1 OR BETTER
Stability for product types:
10 Ω to 1 MΩ
10 Ω to 1 MΩ
CRA06E/CRA06S
Resistance (4.5)
-
1 %
2 %; 5 %
20/- 55/20 °C and
20/125/20 °C
Temperature coefficient (4.8.4.2)
100 ppm/K
200 ppm/K
U = 2.5 × (P70 x R)1/2
≤ 2 x Umax.; 0.5 s
Overload (4.13)
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
Aging 4 h at 155 °C, dryheat
solder bath method; 235 °C; 2 s
visual examination
Good tinning (≥ 95 % covered)
no visible damage
Solderability (4.17.5) (2)
Solder bath method;
(260 5) °C; (10 1) s
Resistance to soldering heat (4.18.2)
Rapid change of temperature (4.19)
Damp heat, steady state (4.24)
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
(2 % R + 0.1 Ω)
30 min at LCT = - 55 °C;
30 min at UCT = 125 °C; 5 cycles
(0.25 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(40 2) °C; 56 days;
(93 3) % RH
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
Climatic sequence (4.23)
(1 % R + 0.05 Ω)
(2 % R + 0.1 Ω)
U = (P70 x R)1/2
U = Umax.; whichever is less severe
U = (P70 x R)1/2
U = Umax.; whichever is less severe
1.5 h ON; 0.5 h OFF;
Endurance at 70 °C (4.25.1)
(1 % R + 0.05 Ω)
(2 % R + 0.1 Ω)
70 °C; 1000 h
Extended endurance (4.25.1.8)
Duration extended to 8000 h
UCT = 125 °C; 1000 h
(2 % R + 0.1 Ω)
(1 % R + 0.05 Ω)
(4 % R + 0.1 Ω)
(2 % R + 0.1 Ω)
Endurance at upper category
temperature (4.25.3)
Notes
(1)
Figures are given for a single element
Solderability is specified for 2 years after production or requalification. Permitted storage time is 20 years
(2)
APPLICABLE SPECIFICATIONS
• EN 60115-1
• EN 140400
• EN 140401-802
• IEC 60068-2-X
• EIA 481
Generic Specification
Sectional Specification
Detail Specification
Variety of environmental test procedures
Packaging of SMD components
www.vishay.com
254
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
Document Number: 31002
Revision: 13-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
CRA06E08364K9FTC
RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT
VISHAY
CRA06E083910RJTA
RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明