CRA06E08333R0FTA [VISHAY]

RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT;


型号：	CRA06E08333R0FTA
厂家：	VISHAY
描述：	RESISTOR, NETWORK, FILM, ISOLATED, 0.063W, SURFACE MOUNT, CHIP, ROHS COMPLIANT 电阻器
文件：	总4页 (文件大小：106K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CRA06E, CRA06S

www.vishay.com

Vishay

Thick Film Chip Resistor Array

FEATURES

• Convex terminal array available with either

scalloped corners (E version) or square corners

(S version)

• Wide ohmic range: 10  to 1 M

• 4 or 8 terminal package with isolated resistors

• AEC-Q200 qualified

CRA06E and CRA06S Thick Film resistor arrays are

constructed on a high grade ceramic body with convex

terminations. A small package enables the design of high

density circuits. The single component reduces board

space, component counts and assembly costs.

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING LIMITING ELEMENT TEMPERATURE

RESISTANCE

RANGE



TOLERANCE

ꢁ

MODEL

CIRCUIT

P₇₀

VOLTAGE MAX.

COEFFICIENT

ppmꢀ/

SERIES

V

100

200

E24; E96

E24

0.063

10R to 1M

CRA06E

CRA06S

2; 5

Zero-Ohm-Resistor: R_max.= 50 m, I_max.= 1 A

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

CRA06E AND CRA06S

Rated dissipation at 70 °C ⁽¹⁾

Limiting element voltage ⁽²⁾

Insulation voltage (1 min)

Category temperature range

Insulation resistance

W per element

0.063

V

V_{DC/AC PEAK}

100

°C

-55 to +155

> 10⁹



Notes

(1)

(2)

Rated voltage: P x R

The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the

printed-circuit board (thermal resistance). The rates dissipation applies only if the permitted film temperature of 155 °C is not exceed

PART NUMBER AND PRODUCT DESCRIPTION

Part Number: CRA06S08347/0JTA ⁽¹⁾

MODEL

CRA06

TERMINAL STYLE

CIRCUIT

VALUE

TOLERANCE

PACKAGING ⁽²⁾

SPECIAL

3 = 03

R = decimal

/ = thousand

M = million

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

Up to 2 digits

0000 = 0  jumper

Z = 0  jumper

Product Description: CRA06S 08 03 -05 473 J RT1 e3

CRA06S

473

RT1

MODEL

TERMINAL COUNT

CIRCUIT TYPE

RESISTANCE VALUE

TOLERANCE

PACKAGING

LEAD (Pb)-FREE

CRA06E

CRA06S

1R0 = 1 

10R = 10 

47/ = 47 k

1M0 = 1 M

0R0 = jumper

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

RT1

RT6

e3 = pure tin

termination finish

Z = 0  jumper

First two digits (3 for

1 ꢀ) are significant. Last

digit is the multiplier

Notes

(1)

Preferred way for ordering products is by use of the PART NUMBER

Please refer to table PACKAGING, see next page

(2)

Revison: 28-Feb-17

Document Number: 31002

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRA06E, CRA06S

www.vishay.com

Vishay

AVAILABLE TYPES AND RANGES

TEMPERATURE

MODEL

TERMINAL COUNT

CIRCUIT

TOLERANCE

COEFFICIENT

100 ppm/K

200 ppm/K

100 ppm/K

200 ppm/K

100 ppm/K

200 ppm/K

1 ꢀ

2 ꢀ; 5 ꢀ

1 ꢀ

CRA06S

2 ꢀ; 5 ꢀ

1 ꢀ

CRA06E

2 ꢀ; 5 ꢀ

PACKAGING

MODEL

PAC/AGING CODE

PAPER TAPE

TAPE WIDTH

PITCH

PIECES ꢀ REEL

PRODUCT

PART NUMBER

DESCRIPTION

180 mm/7"

4 mm

5000

RT1

RT6

CRA06

330 mm/13"

20 000

CIRCUIT

120

100

03 CIRCUIT

8 pin

4 pin

-55

-25

100

125

155

Ambient Temperature in °C

Derating

DIMENSIONS

S-Version

E-Version

103

PIN 1

DIMENSIONS in millimeters

REFLOW SOLDER PAD DIMENSIONS in millimeters

MODEL

NO#

A₁

0.38 0.61

0.38

0.38 0.61

0.3

MODEL

CRA06S

PINS

CRA06S

CRA06E

CRA06S

1.6

3.2

0.3

0.8 0.5

1.5

0.8

3.1 0.36

0.44 1.15

CRA06E

CRA06S

0.8

3.1 0.36 0.8 0.44 1.15 0.63

TOL. 0.15 0.15 0.15 0.15 0.15 0.1 0.1 0.15

Revison: 28-Feb-17

Document Number: 31002

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRA06E, CRA06S

www.vishay.com

Vishay

TEST PROCEDURES AND REQUIREMENTS

EN 60115-1

REQUIREMENTS

PERMISSIBLE CHANGE (RꢀR) ⁽¹⁾

TEST

(clause)

CONDITIONS OF TEST

STABILITY

CLASS 2 OR BETTER

CLASS 1 OR BETTER

Stability for product types:

CRA06E ꢀ CRA06S

10  to 1 M

Resistance (4.5)

1 ꢀ

2 ꢀ; 5 ꢀ

200 ppm/K

(20 / -55 / 20) °C and

(20 / 125 / 20) °C

Temperature coefficient (4.8.4.2)

100 ppm/K

U = 2.5 x (P₇₀x R)^1/2

 2 x U_max.; 0.5 s

Overload (4.13)

(0.25 ꢀ R + 0.05 )

(0.5 ꢀ R + 0.05 )

Aging 4 h at 155 °C, dry heat

solder bath method; 235 °C; 2 s

visual examination

Good tinning ( 95 ꢀ covered)

no visible damage

Solderability (4.17.5) ⁽²⁾

Solder bath method;

(260 5) °C; (10 1) s

Resistance to soldering heat (4.18.2)

Rapid change of temperature (4.19)

Damp heat, steady state (4.24)

(0.25 ꢀ R + 0.05 )

(0.5 ꢀ R + 0.05 )

(2 ꢀ R + 0.1 )

30 min at LCT = -55 °C;

30 min at UCT = 125 °C; 5 cycles

(0.25 ꢀ R + 0.05 )

(1 ꢀ R + 0.05 )

(40 2) °C; 56 days;

(93 3) ꢀ RH

16 h at UCT = 125 °C; 1 cycle at 55 °C;

2 h at LCT = -55 °C;

1 h/1 kPa at 15 °C to 35 °C;

5 cycles at 55 °C

Climatic sequence (4.23)

(1 ꢀ R + 0.05 )

(2 ꢀ R + 0.1 )

U = (P₇₀x R)^1/2

U = U_max.; whichever is less severe

U = (P₇₀x R)^1/2

U = U_max.; whichever is less severe

1.5 h ON; 0.5 h OFF;

Endurance at 70 °C (4.25.1)

(1 ꢀ R + 0.05 )

(2 ꢀ R + 0.1 )

70 °C; 1000 h

Extended endurance (4.25.1.8)

Duration extended to 8000 h

(2 ꢀ R + 0.1 )

(1 ꢀ R + 0.05 )

(4 ꢀ R + 0.1 )

(2 ꢀ R + 0.1 )

Endurance at upper category

temperature (4.25.3)

UCT = 125 °C; 1000 h

Notes

(1)

Figures are given for a single element

Solderability is specified for 2 years after production or requalification. Permitted storage time is 20 years

(2)

APPLICABLE SPECIFICATIONS

• EN 60115-1

• EN 140400

• EN 140401-802

• IEC 60068-2-X

• EIA 481

Generic specification

Sectional specification

Detail specification

Variety of environmental test procedures

Packaging of SMD components

Revison: 28-Feb-17

Document Number: 31002

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 08-Feb-17

Document Number: 91000

相关型号：