CMF60100K00FHR6 [VISHAY]
RES 100K OHM 1W 1% AXIAL;型号: | CMF60100K00FHR6 |
厂家: | VISHAY |
描述: | RES 100K OHM 1W 1% AXIAL |
文件: | 总5页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMF Industrial
www.vishay.com
Vishay Dale
Metal Film Resistors, Axial, Industrial, Precision
FEATURES
• Small size - conformal coated
• Flame retardant epoxy coating
• Controlled temperature coefficient
• Excellent high frequency characteristics
• Exceptionally low noise; typically 0.10 μV/V
• Low voltage coefficient to 5 ppm/V
• Special tolerance and or TC matching
available on request
Available
Available
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details
Vishay Dale Model CMF is also available as Military Qualified Styles RN and RL. See Vishay Dale’s CMF (Military RN and RL)
datasheet (www.vishay.com/doc?31027) for the MIL-SPEC ratings / attributes. (Except for marking, the Industrial and Military
versions are exactly the same).
STANDARD ELECTRICAL SPECIFICATIONS
MAXIMUM
WORKING
VOLTAGE (1)
V
POWER
POWER
RATING
RESISTANCE
RANGE
TEMPERATURE
COEFFICIENT
ꢁꢁm/°C
GLOBAL
MODEL
HISTORICAL
MODEL
RATING
TOLERANCE
ꢀ
(2)
(2)
P70 °C
P125 °C
W
W
10 to 2.5M
10 to 2.5M
10 to 2.5M
10 to 22M
10 to 2.5M
10 to 2.5M
10 to 5M
1 to 22.1M
0.5 to 50M
0.5 to 50M
0.1 to 50M
0.2 to 50M
10 to 2.5M
10 to 2.5M
10 to 10M
1 to 10M
0.5 to 10M
0.5 to 10M
0.1 to 10M
0.2 to 50M
10 to 2.5M
10 to 2.5M
10 to 10M
1 to 15M
0.5 to 22M
0.5 to 22M
0.1 to 22M
0.2 to 50M
10 to 2.5M
10 to 2.5M
10 to 10M
1 to 15M
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5, 1, 2, 5
25
50
100
150, 200
25
CMF50
CMF55
CMF-50
CMF-55
200
250
0.25
0.125
1, 2, 5
1, 2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5
1, 2, 5
50
50
1, 2, 5
1, 2, 5
1
2, 5
100
150
200
300
200
25
0.5
0.25
2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5
1, 2, 5
50
50
1, 2, 5
1, 2, 5
1
2, 5
100
150
200
300
200
25
CMF60
CMF-60
500
1
0.5
2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5
1, 2, 5
50
50
1, 2, 5
1, 2, 5
1
2, 5
100
150
200
300
200
25
CMF65
CMF70
CMF-65
CMF-70
500
500
1.5
1
2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5
1, 2, 5
50
50
1.75
1.25
1, 2, 5
1, 2, 5
2, 5
2, 5
2, 5
2, 5
100
150, 200
100
150, 200
100
150, 200
1 to 22M
5 to 5M
1 to 5M
5 to 10M
CMF07
CMF20
CMF-07
CMF-20
250
500
0.5
1
-
-
1 to 10M
Notes
(1)
(2)
Continuous working voltage shall be P x R or maximum working voltage, whichever is less
See the load life shift due to power and derating table for a summary of the more common combinations of power rating, case size and
ambient operating temperature that prevail in various industrial and military resistor specifications. The “performance” table quantifies the
load life stability under these combinations
Revision: 10-Nov-2020
Document Number: 31018
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CMF Industrial
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CMF55301R00FKRE (ꢁreferred ꢁart numbering format)
C
M
F
5
5
3
0
1
R
0
0
F
K
R
E
GLOBAL
MODEL
RESISTANCE
VALUE
TOLERANCE
CODE
TEMPERATURE
COEFFICIENT (1)
PACKAGING
SPECIAL
(See Standard
Electrical
Specifications
table)
R =
K = k
M = M
B = 0.1 ꢀ
C = 0.25 ꢀ
D = 0.5 ꢀ
F = 1 ꢀ
E = 25 ppm
H = 50 ppm
K = 100 ppm
L = 150 ppm
N = 200 ppm
M = 300 ppm
EK = lead (Pb)-free, bulk
EA = lead (Pb)-free, T/R (full)
EB = lead (Pb)-free,
Blank = standard
(Dash number)
(Up to 3 digits)
R10000 = 0.1
680K00 = 680 k
1M0000 = 1.0 M
T/R (1000 pieces)
From 1 to 999
as applicable
70 = color banded,
5 bands ( 1 ꢀ)
80 = color banded,
4 bands ( 2 ꢀ)
88 = hot solder dip
G = 2 ꢀ
BF = tin / lead, bulk
RE = tin / lead, T/R (full)
R6 = tin / lead, T/R (1000 pieces)
J = 5 ꢀ
Historical Part Number Examꢁle: CMF-553010FT-1 (will continue to be acceꢁted)
CMF-55
3010
F
T-1
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
TEMPERATURE COEFFICIENT
PACKAGING
Notes
•
For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544)
Tolerances of 0.5 ꢀ (D), 0.25 ꢀ (C) and 0.1 ꢀ (B) are available only in 50 ppm and 25 ppm temperature coefficients
(1)
DIMENSIONS in inches (millimeters)
1.500 0.125 (1)
(38.10 3.18)
A
C
(Max.)
D
B
C
GLOBAL MODEL
CMF50
A
B
D
(Max.)
0.150 0.020
(3.81 0.51)
0.065 0.015
(1.65 0.38)
0.090 0.008
(2.29 0.20)
0.145 0.015
(3.68 0.38)
0.180 0.015
(4.57 0.38)
0.180 0.015
(4.57 0.38)
0.090 0.008
(2.29 0.20)
0.145 0.015
(3.68 0.38)
0.016 0.002 (2)
(0.41 0.05)
0.187 (4.75)
0.290 (7.37)
0.425 (10.80)
0.687 (17.45)
0.687 (17.45)
0.290 (7.37)
0.425 (10.80)
0.240 0.020 (3)
(6.10 0.51)
0.025 0.002
CMF55
(0.64 0.05)
0.344 0.031
(8.74 0.79)
0.562 0.031
(14.27 0.79)
0.562 0.031
(14.27 0.79)
0.240 0.020
(6.10 0.51)
0.025 0.002 (4)
(0.64 0.05)
CMF60
0.025 0.002
(0.64 0.05)
0.032 0.002
(0.81 0.05)
0.025 0.002
(0.64 0.05)
0.032 0.002
(0.81 0.05)
CMF65
CMF70
CMF07
0.375 0.040
(9.53 1.02)
CMF20
Notes
(1)
Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape
spacing and lead trim.
(2)
(3)
(4)
Available with 0.020" (0.51 mm) lead [CMF50..38]
0.260" 0.020" (6.60 mm 0.51 mm) for values > 5 M
Available with 0.032" (0.813 mm) lead [CMF60..95]
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
V
Veff
ppm/V
VAC
CMF50
200
CMF55
250
CMF07
250
CMF60
500
> 500
CMF20
500
CMF65
500
CMF70
500
Maximum Working Voltage
Insulation Voltage (1 Min)
Voltage Coefficient (Max.)
Dielectric Strength
5 (measured between 10 ꢀ and full rated voltage)
450
450
450
750
1011
-55 to +175
750
900
900
5
Insulation Resistance
Operating Temperature Range
Terminal Strength (Pull Test)
°C
lb
2
2
5
2
5
2
0.10 μV/V over a decade of frequency, with low and intermediate resistance values
typically below 0.05 μV/V
Noise
dB
g
Weight (Max.)
0.12
0.28
0.28
0.50
0.60
1.00
1.10
Revision: 10-Nov-2020
Document Number: 31018
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CMF Industrial
www.vishay.com
Vishay Dale
TEMPERATURE COEFFICIENT CODES
GLOBAL TC CODE
HISTORICAL TC CODE
TEMPERATURE COEFFICIENT
E
T-9
T-2
T-1
T-0
T-00
M
25 ppm/°C
50 ppm/°C
100 ppm/°C
150 ppm/°C
200 ppm/°C
300 ppm/°C
H
K
L
N
M
LOAD LIFE SHIFT DUE TO POWER AND DERATING (AT +70 °C AND AT +125 °C)
The power rating for the CMF parts is tied to the derating temperature, the heat rise of the parts, and the R for the load life performance.
When the tables/graphs below are used together they show that when the parts are run at their higher power ratings, the parts will run hotter,
which has the potential of causing the resistance of the parts to shift more over the life of the part.
LOAD LIFE SHIFT VS. POWER RATING
MAXIMUM R (TYPICAL TEST LOTS)
LOAD LIFE
0.15 ꢀ
0.5 ꢀ
1.0 ꢀ
0.15 ꢀ
0.5 ꢀ
1.0 ꢀ
MODEL
POWER RATING AT +70 °C
POWER RATING AT +125 °C
CMF50
1/20 W and 1/10 W
1/8 W
1/4 W
1/2 W
3/4 W
3/4 W
1/4 W
1/20 W
1/10 W
1/8 W
1/4 W
1/4 W
1/10 W
1/8 W
1/4 W
1/2 W
1/2 W
1/8 W
CMF55, CMF07
CMF60, CMF20
CMF65
1/10 W and 1/8 W
1/8 W and 1/4 W
1/4 W and 1/2 W
1/4 W and 1/2 W
1/2 W
1/4 W
1/2 W
3/4 W and 1 W
1 W and 1-1/2 W
1 W and 1-3/4 W
3/4 W and 1 W
3/4 W and 1-1/4 W
CMF70
CMF resistors have an operating temperature range of -55 °C to +175 °C. They must be derated at high ambient temperatures according to
the derating curve.
120
100
80
120
100
80
60
40
20
0
CMF50
CMF55,
CMF07
CMF60,
CMF20
CMF65,
CMF70
60
40
20
0
0
0.125 0.25 0.375 0.5 0.625 0.75 0.875
1
1.125
- 50
0
- 55
- 25
25
50 70 75 100 125 150 165 175 200
APPLIED POWER IN W
AMBIENT TEMPERATURE IN °C
DERATING
THERMAL RESISTANCE
Examꢁle:
When a CMF55 part is run at 1/8 W in a 70 °C ambient environment, the resistor will generate enough heat that the surface temperature of
the part will reach about 19 °C over the ambient temperature, and over the life of the part this could cause the resistance value to shift up to
0.15 ꢀ.
If the same resistor was instead run at 1/4 W in a 70 °C environment, the element will heat up to about 30 °C over ambient, and over the life
of the part the resistance value could shift roughly 0.5 ꢀ.
And if the resistor was run at it maximum power rating of 1/2 W in a 70 °C environment, it will heat up to about 58 °C over ambient, and you
could see the resistance value shift roughly 1 ꢀ over the life of the part.
MATERIAL SPECIFICATIONS
Flame retardant epoxy, formulated for superior
Element
Vacuum-deposited nickel-chrome alloy
Coating
moisture protection
Continuous satisfactory coverage when tested
in accordance with MIL-R-10509
Core
Fire-cleaned high purity ceramic
Solderability
Revision: 10-Nov-2020
Document Number: 31018
3
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CMF Industrial
www.vishay.com
Vishay Dale
SPECIAL MODIFICATIONS
1. Terminals may be supplied in any commercial material with several type finishes.
2. Special pre-conditioning (power aging, temperature cycling, etc.) to customer specifications.
3. Non-helixed resistors can be supplied for critical high frequency applications.
4. Fusible, flameproof versions available.
MARKING
Temperature coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm, M = 300 ppm
CMF50: (3 lines) CMF55, CMF60, CMF65, CMF70: (5 lines)
3.01
Value
DALE
Manufacturer’s name
Style and size
Value
K 1 ꢀ
1208
Ohm, K or M sign and Tolerance
4-digit date code
CMF55
49.9 k
1 ꢀ T2
1208
Tolerance and TC
4-digit date code
Note
•
CMF07 and CMF20 parts are marked with color bands, either per MIL-PRF-22684 (with a wide white band) or using commercial color bands.
CMFxx..70 and CMFxx..80 parts are marked using commercial color bands
PERFORMANCE
AT +70 °C
AT +125 °C
TEST
(TEST METHODS - MIL-STD-202)
MAXIMUM R (TYPICAL TEST LOTS)
Short Time Overload
Low Temperature Operation
Moisture Resistance
Shock
0.05 ꢀ
0.05 ꢀ
0.05 ꢀ
0.01 ꢀ
0.04 ꢀ
0.15 ꢀ
0.05 ꢀ
0.05 ꢀ
0.05 ꢀ
0.01 ꢀ
0.04 ꢀ
0.15 ꢀ
Vibration
Temperature Cycling
Load Life
Varies based on power rating used; see load life shift due to power and derating table
Dielectric Withstanding Voltage
Effect of Solder
0.01 ꢀ
0.03 ꢀ
0.01 ꢀ
0.03 ꢀ
Revision: 10-Nov-2020
Document Number: 31018
4
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明