CMA0204AX1800GB300 [VISHAY]
RES,MELF,CARBON FILM,180 OHMS,2% +/-TOL,-250,250PPM TC;![CMA0204AX1800GB300](http://pdffile.icpdf.com/pdf2/p00265/img/icpdf/CMA0204AX180_1595125_icpdf.jpg)
型号: | CMA0204AX1800GB300 |
厂家: | ![]() |
描述: | RES,MELF,CARBON FILM,180 OHMS,2% +/-TOL,-250,250PPM TC 电阻器 |
文件: | 总7页 (文件大小:95K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMA 0204 HF
Vishay Beyschlag
Pulse Load MELF Resistors for High Frequency Applications
FEATURES
• Speciality product for RF applications
• Low-inductance non-helical trimmed product
• Special carbon film technology
• ESD capability: 3 kV, Human Body Model
• Suitable for more than 10 GHz
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Lead (Pb)-free and RoHS compliant
CMA 0204 HF speciality MELF resistors combine the
advanced pulse load capability and the suitability for RF
applications in a single component. They are the perfect
choice in high frequency circuit designs where the parasitic
APPLICATIONS
• Telecommunication equipment
• Industrial electronics
inductance of regular, helical trimmed resistors can not be
accepted, but where also pulse energies apply. Typical
applications are in the fields of telecommunication
equipment and industrial electronics.
METRIC SIZE
DIN:
0204
CECC:
RC 3715M
TECHNICAL SPECIFICATION
DESCRIPTION
CMA 0204 HF
RC 3715M
CECC size
Resistance range
50 Ω; 47 Ω to 300 Ω
2 ꢀ
Resistance tolerance
Temperature coefficient
Operation mode
approx. - 250 ppm/K
standard
55/125/56
0.25 W
power
55/155/56
0.4 W
Climatic category (LCT/UCT/days)
1)
Rated dissipation P70
Operating voltage, Umax AC/DC
Film temperature
Limited by P70
47 Ω to 300 Ω
125 °C
155 °C
Max. resistance change at P70 for resistance range,
|ΔR/R| after:
1000 h
8000 h
≤ 1 ꢀ
≤ 2 ꢀ
t.b.f.
≤ 2 ꢀ
≤ 4 ꢀ
-
225 000 h
Permissible voltage against ambient (insulation):
1 minute; Uins
300 V
75 V
continuous
Failure rate
≤ 1 × 10-9/h
Note: These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heatflow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a
high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board
materials may be required to maintain the reliability of the assembly.
www.vishay.com
58
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28759
Revision: 18-Jul-06
CMA 0204 HF
Pulse Load MELF Resistors for High
Frequency Applications
Vishay Beyschlag
Last Digit of 12NC Indicating Resistance Decade
12NC INFORMATION
RESISTANCE DECADE
LAST DIGIT
• The 12-digit numeric code starts with 2312
10 Ω to 99.9 Ω
100 Ω to 999 Ω
9
1
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table
12NC Example
• The remaining 4 digits indicate the resistance value:
The 12NC of a CMA 0204 HF resistor, value 50 Ω with 1 ꢀ
tolerance, supplied in blister tape of 3000 units per reel is:
2312 158 25009.
– The first 3 digits indicate the resistance value.
– The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance
Decade table.
12NC - resistor type and packaging
ORDERING CODE 2312 ... .....
BLISTER TAPE ON REEL
DESCRIPTION
BL
TYPE
TOL.
3000 UNITS
CMA 0204 HF
2 ꢀ
.... 158 2 ....
PART NUMBER AND PRODUCT DESCRIPTION1)
PART NUMBER2): CMA0204AX1000GB300
B
3
0
0
C
M
A
0
2
0
4
A
X
1
0
0
0
G
MODEL/SIZE SPECIAL CHARACTER
CMA0204 A = HF High Frequency
TC
X = no indication
VALUE
TOLERANCE PACKAGING3)
SPECIAL
3 digit value
G = 2 ꢀ
B3
up to 2 digits
1 digit multiplier
Multiplier
9 = *10-1
00 = standard
0 = *100
PRODUCT DESCRIPTION4): CMA 0204 2 % HF BL 100R
CMA
0204
2 %
HF
BL
100R
MODEL
CMA
SIZE
0204
TOLERANCE
2 %
SUFFIX
PACKAGING3)
BL
RESISTANCE VALUE
HF = High Frequency
100R = 100 Ω
Note
1. Products can be ordered using either the PRODUCT DESCRIPTION or the 12NC.
2. The PART NUMBER is shown to facilitate the introduction of the unified part numbering system. Currently, this PART NUMBER is applicable
in the Americas and in Asia/Pacific only.
3. Please refer to table PACKAGING, see below.
4. For CMA0204 the temperature coefficient is not identified in the PRODUCT DESCRIPTION.
Document Number: 28759
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
59
CMA 0204 HF
Pulse Load MELF Resistors for High
Frequency Applications
Vishay Beyschlag
PACKAGING
BLISTER TAPE ON REEL
ACC. IEC 60286-3
TYPE
DIAMETER
PIECES/REEL
CODE
CMA 0204 HF
180 mm/7"
3000
B3 = BL
DIMENSIONS
L
Color code marking1)
D
D
1
L
K
1
DIMENSIONS - MELF resistor types, mass and relevant physical dimensions
L
D
(mm)
L1 min
(mm)
D1
(mm)
K
(mm)
MASS
(mg)
TYPE
(mm)
CMA 0204 HF
3.6 + 0/- 0.2
1.4 + 0/- 0.1
1.8
D + 0/- 0.15
0.8 0.1
19
1)
Color code marking is applied according to IEC 60062* in four bands. Each color band appears as a single solid line, voids are permissible if
at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 ꢀ wider than the other
bands. Interrupted bands left and right of the 3rd full band indicate the special carbon film high frequency type.
TOLERANCE AND RESISTANCE RANGE
TYPE
TOLERANCE
RESISTANCE VALUE
50 Ω
CMA 0204 HF
2 ꢀ
47 Ω to 300 Ω1)
1) Please select resistance values for 2 ꢀ tolerance from the E24 series.
www.vishay.com
60
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28759
Revision: 18-Jul-06
CMA 0204 HF
Pulse Load MELF Resistors for High
Frequency Applications
Vishay Beyschlag
DESCRIPTION
APPROVALS
Production of the CMA 0204 HF speciality MINI-MELF
resistor is strictly controlled and follows an extensive set of
instructions established for reproducibility. A homogeneous
and dense carbon film is deposited on a high grade ceramic
body (85 ꢀ Al2O3). Nickel plated steel termination caps are
firmly pressed on the coated rods. A special laser is used to
achieve the target value by smoothly cutting a non helical
pattern with a resulting low inductivity in the resistive layer
without damaging the ceramics. The resistor elements are
covered by a protective coating designed for electrical,
mechanical and climatic protection.The terminations receive
a final pure tin on nickel plating. Four color code rings
designate the resistance value and tolerance in accordance
with IEC 60062*.
Where applicable the resistors are tested in accordance with
EN 140401-803 which refers to EN 60115-1, EN 140400 and
the variety of enviromental text procedures of the IEC 60068*
series.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
Note:
* The quoted IEC standards are also released as EN standards with
the same number and identical contents.
The result of the determined production is verified by an
extensive testing procedure performed on 100 ꢀ of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60286-3*.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1*. Excellent solderability is proven, even after
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions. The resistors are completely lead (Pb)-free, the
pure tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL1) and the CEFIC-
EECA-EICTA2) list of legal restrictions on hazardous
substances. This includes full compliance with the following
directives:
•
2000/53/EC End of Vehicle life Directive (ELV) and the
Annex II (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
1)
Global Automotive Declarable Substance List, see www.gadsl.org
2)
CEFIC (European Chemical Industry Council), EECA (European
Electronic Component Manufacturers Association), EICTA
(European trade organisation representing the information and
communications technology and consumer electronics), see
www.eicta.org -> issues -> environment policy -> chemicals ->
chemicals for electronics
Document Number: 28759
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
61
CMA 0204 HF
Pulse Load MELF Resistors for High
Frequency Applications
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
1
Power Operation
Standard Operation
W
0.5
0
- 50
0
50
70
100
C
150
Ambient Temperature
ϑamb
Derating - Standard Operation
1 kV
100 V
10 V
100 Ω
10 kΩ
Resistance Value
R
Pulse load rating in accordance with IEC 60115-1, 4.27; 1,2 µs/50 µs; 5 pulses at 12 s intervals;
for permissible resistance change 0.5 %
1.2/50 Pulse
2.0
1.5
1.0
0.5
50 Ω
0.1 GHz
1.0 GHz
10.0 GHz
Frequency f
RF - Behaviour
www.vishay.com
62
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28759
Revision: 18-Jul-06
CMA 0204 HF
Pulse Load MELF Resistors for High
Frequency Applications
Vishay Beyschlag
REVISION HISTORY
Compared to the prior revision of this datasheet, CMA HF 030331, the following changes have been applied:
• Transfer into Vishay format for publication on the internet
• Introduction of a standardized part numbering system
• Emphasis on the clean balance of materials and on the compliance with various EU directives
• Introduction of information on electrostatic discharge (ESD) capability
• No other change of technical contents
• No product change
Document Number: 28759
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
63
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明