BFC238360432 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0043 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;型号: | BFC238360432 |
厂家: | VISHAY |
描述: | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0043 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
文件: | 总26页 (文件大小:222K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Not Recommended for New Design, Use New MMKP383
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors
MMKP Radial Potted Type
FEATURES
168x12(halfpage)
w
w
l
l
7.5 mm bent back pitch. 15 mm to 27.5 mm lead
pitch. Low contact resistance. Low loss dielectric.
Small dimensions for high density packaging.
Supplied loose in box and taped on reel
h
h
h'
H
F'
l
t
(1)
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
F
¯d
¯d
t
t
P
10
15
ENCAPSULATION
Dimensions in mm
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
(1) F - F’ 0.3 mm
F = 7.5 + 0.6/- 0.1 mm
CLIMATIC CATEGORY
APPLICATIONS
55/105/56
Where steep pulses occur e.g. SMPS (switch mode power
supplies). Electronic lighting e.g. Ballast. Motor control
circuits. S-correction. For flyback applications please use
1400 V series.
CAPACITANCE RANGE (E24 SERIES)
0.001 µF to 2.7 µF
CAPACITANCE TOLERANCE
REFERENCE SPECIFICATIONS
5 ꢀ
IEC 60384-17
MARKING
LEADS
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type; code for dielectric material; code for factory of origin;
manufacturer; year and week of manufacture
Tinned wire
RATED (DC) TEMPERATURE
85 °C
DIELECTRIC
Polypropylene film
RATED (AC) TEMPERATURE
105 °C
ELECTRODES
Metallized
MAXIMUM APPLICATION TEMPERATURE
ENCAPSULATION
105 C
Flame retardant plastic case and epoxy resin
DETAIL SPECIFICATION
CONSTRUCTION
For more detailed data and test requirements contact:
dc-film@vishay.com
Internal serial construction
RATED (DC) VOLTAGE
250 V, 400 V, 630 V, 1000 V, 1400 V, 1600 V, 2000 V,
2500 V
RATED (AC) VOLTAGE
125 V, 200 V, 220 V, 350 V, 500 V, 550 V, 700 V, 900 V
RATED PEAK-TO-PEAK VOLTAGE
350 V, 560 V, 630 V, 1000 V, 1400 V, 1600 V, 2000 V,
2500 V
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
www.vishay.com
187
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TYPE AND PITCHES
CAPACITANCE
(numerically)
15.0 mm/7.5 mm
0.1
1
2
3
4
5
15.0 mm
383
22.5 mm
Example:
10
100
27.5 mm
104 10 x 10 100 nF
BFC2 383 XX YY Y
2222 (1) 383 XX YY Y
(1) Old ordering code
PREFERRED TYPES
TYPE PACKAGING
LEAD CONFIGURATION
C-TOL. 250 V 400 V 630 V 1000 V 1400 V 1600 V 2000 V 2500 V
Loose in box
Lead length 3.5 mm 0.3 mm
5 ꢀ
00
03
10
13
20
23
30
33
40
43
50
53
60
63
70
-
Taped on reel
383
H 16.0 mm; P0 15.0 mm
reel diameter 500 mm
(bent back to
7.5 mm) (1)
5 ꢀ
Dimensions of this code numbers stay between brackets
ON REQUEST
Lead length 5.0 mm 1.0 mm
Lead length 25.0 mm 2.0 mm
5 ꢀ
5 ꢀ
01
04
11
14
21
24
31
34
41
44
51
54
61
64
71
74
Loose in box
Taped on reel
H 18.5 mm; P0 12.7 mm
5 ꢀ
02
05
12
15
22
25
32
35
42
45
52
55
62
65
72
-
(1)
Taped on reel
(bent back to
7.5 mm) (1)
383
H 16.0 mm; P0 15.0 mm
reel diameter 356 mm
5 ꢀ
Dimensions of this code numbers stay between brackets
Taped on reel
(bent back to
10.0 mm) (1)
H 16.0 mm; P0 15.0 mm
reel diameter 500 mm
5 ꢀ
08
18
28
38
48
58
68
-
Note
(1) For detailed tape specifications refer to “Packaging Information” www. vishay.com/doc?28139 or end of catalog
SPECIFIC REFERENCE DATA (250 Vdc)
DESCRIPTION
VALUE
Tangent of loss angle:
C 0.15 µF
0.15 µF C 0.39 µF
0.39 µF C 0.56 µF
0.56 µF C 0.82 µF
0.82 µF C 1.2 µF
1.2 µF C 1.8 µF
1.8 µF C 2.2 µF
at 10 kHz
5 x 10-4
5 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
15 x 10-4
15 x 10-4
at 100 kHz
20 x 10-4
25 x 10-4
25 x 10-4
40 x 10-4
50 x 10-4
65 x 10-4
75 x 10-4
85 x 10-4
2.2 µF C 2.7 µF
Rated voltage pulse slope (dU/dt)R:
C 0.15 µF
450 V/µs
0.15 µF C 0.39 µF
0.39 µF C 0.82 µF
900 V/µs
290 V/µs
0.82 µF C 2 µF
190 V/µs
2 µF C 2.7 µF
130 V/µs
R between leads, for C 1 µF at 100 V, 1 min
RC between leads, for C 1 µF at 100 V, 1 min
R between leads and case, 100 V, 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
100 000 M
100 000 s
30 000 M
220 V
400 V, 1 min
2840 V, 1 min
105 °C
www.vishay.com
188
For technical questions, contact: dc-film@vishay.com
Document Number: 28124
Revision: 19-Mar-13
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 7.5 mm (bent back)
Pitch = 15 mm
0.082
0.091
0.1
823
913
104
114
124
134
154
164
184
204
224
244
274
304
334
364
394
00…
(1250)
04…
(1000)
02…
(1100)
03…
(950)
05…
(550)
5.0 x 11.0 (13.0) x 17.5
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
10.0 x 16.5 (18.5) x 17.5
1.1
1.4
1.8
2.6
3.3
0.11
0.12
0.13
0.15
0.16
0.18
0.2
0.22
0.24
0.27
0.3
00…
(1000)
04…
(1000)
02…
(900)
03…
(800)
05…
(450)
00…
(750)
04…
(500)
02…
(800)
03…
(700)
05…
(400)
00…
(750)
04…
(500)
02…
(650)
03…
(550)
05…
(300)
0.33
0.36
0.39
00…
(500)
04…
(450)
02…
(600)
03…
(500)
05…
(250)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (1)
Leads
3.5 0.3 mm
XX
Leads
25.0 2.0 mm
XX
Original pitch
..YYY
XX
(SPQ)
(SPQ)
(SPQ)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
00…
(200)
04…
(250)
02…
(550)
0.43
7.0 x 116.5 x 26.0
3.0
434
0.47
0.51
0.56
0.62
0.68
0.75
0.82
474
514
564
624
684
754
824
00…
(200)
04…
(250)
02…
(450)
8.5 x 18.0 x 26.0
4.2
00…
(200)
04…
(200)
02…
(350)
10.0 x 19.5 x 26.0
5.3
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.91
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
914
105
115
125
135
155
165
185
205
225
245
275
00…
(750)
04…
(125)
11.0 x 21.0 x 31.0
8.0
00…
(500)
04…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
9.7
-
00…
(100)
04…
(125)
12.6
16.3
00…
(100)
04…
(100)
2.4
2.7
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
189
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (400 Vdc)
DESCRIPTION
Tangent of loss angle:
VALUE
at 10 kHz
5 x 10-4
at 100 kHz
20 x 10-4
35 x 10-4
40 x 10-4
50 x 10-4
55 x 10-4
60 x 104
65 x 10-4
C 0.22 µF
0.22 µF C 0.33 µF
0.33 µF C 0.43 µF
0.43 µF C 0.68 µF
0.68 µF C 0.82 µF
0.82 µF C 1.2 µF
1.2 µF C 1.5 µF
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
Rated voltage pulse slope (dU/dt)R:
C 0.082 µF
0.082 µF C 0.22 µF
0.22 µF C 0.43 µF
600 V/µs
1200 V/µs
410 V/µs
0.42 µF C 1.1 µF
260 V/µs
1.1 µF C 1.5 µF
180 V/µs
R between leads, for C 1 µF at 100 V, 1 min
RC between leads, for C 1 µF at 100 V, 1 min
R between leads and case, 100 V, 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
100 000 M
100 000 s
30 000 M
220 V
560 V, 1 min
2840 V, 1 min
105 °C
URdc = 400 V; URac = 200 V; Upp = 560 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.047
473
513
563
623
683
753
823
913
104
114
124
134
154
164
184
204
224
10…
(1250)
14…
(1000)
12…
(1100)
13…
(950)
15…
(550)
5.0 x 11.0 (13.0) x 17.5
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
10.0 x 16.5 (18.5) x 17.5
1.1
1.4
1.8
2.5
3.3
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.1
10…
(1000)
14…
(1000)
12…
(900)
13…
(800)
15…
(450)
10…
(750)
14…
(500)
12…
(800)
13…
(700)
15…
(400)
0.11
0.12
0.13
0.15
0.16
0.18
0.2
10…
(750)
14…
(500)
12…
(650)
13…
(550)
15…
(300)
10…
(500)
14…
(450)
12…
(600)
13…
(500)
15…
(250)
0.22
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
www.vishay.com
190
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 400 V; URac = 200 ; Up-p = 560 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (1)
Original pitch
..YYY
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
10…
(200)
14…
(250)
12…
(550)
0.24
7.0 x 116.5 x 26.0
3.0
244
0.27
0.30
0.33
0.36
0.39
0.43
274
304
334
364
394
434
10…
(200)
14…
(250)
12…
(450)
8.5 x 18.0 x 26.0
4.2
10…
(200)
14…
(200)
12…
(350)
10.0 x 19.5 x 26.0
5.3
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.47
0.51
474
514
564
624
684
754
824
914
105
115
125
135
155
10…
(100)
14…
(125)
11.0 x 21.0 x 31.0
8.0
0.56
0.62
0.68
0.75
0.82
0.91
1.
1.1
1.2
1.3
1.5
-
10…
(100)
14…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
9.7
10…
(100)
14…
(125)
12.6
16.3
-
10…
(100)
14…
(100)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
SPECIFIC REFERENCE DATA (630 Vdc)
DESCRIPTION
Tangent of loss angle:
VALUE
at 10 kHz
at 100 kHz
C 0.15 µF
0.15 µF C 0.22 µF
0.22 µF C 0.3 µF
0.3 µF C 0.47 µF
0.47 µF C 0.68 µF
0.68 µF C 1.0 µF
5 x 10-4
8 x 10-4
8 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
15 x 10-4
25 x 10-4
30 x 10-4
40 x 10-4
45 x 10-4
50 x 10-4
Rated voltage pulse slope (dU/dt)R:
C 0.056 µF
0.056 µF C 0.15 µF
0.15 µF C 0.3 µF
700 V/µs
1400 V/µs
470 V/µs
0.3 µF C 0.75 µF
300 V/µs
0.75 µF C 1.0 µF
210 V/µs
R between leads, for C 1 µF at 100 V, 1 min
R between leads and case, 100 V, 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
100 000 M
30 000 M
250 V
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
1000 V, 1 min
2840 V, 1 min
105 °C
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
191
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 630 V; URac = 220 V; Up-p = 630 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.03
303
333
363
393
433
473
513
563
623
683
753
823
913
104
114
124
134
154
20…
(1250)
24…
(1000)
22…
(2200)
23…
(950)
25…
(550)
5.0 x 11.0 (13.0) x 17.5
1.1
0.033
0.036
0.039
0.043
0.047
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.1
20…
(1000)
24…
(1000)
22…
(900)
23…
(800)
25…
(450)
6.0 x 12.0 (14.0) x 17.5
1.4
20…
(750)
24…
(500)
22…
(800)
23…
(700)
25…
(400)
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
10.0 x 16.5 (18.5) x 17.5
1.8
2.5
3.3
20…
(750)
24…
(500)
22…
(650)
23…
(550)
25…
(300)
0.11
0.12
20…
(500)
24…
(450)
22…
(600)
23…
(500)
25…
(250)
0.13
0.15
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
0.16
164
184
204
224
174
304
0.18
0.2
20…
(200)
24…
(250)
22…
(450)
8.5 x 18.0 x 26.0
4.2
-
-
-
-
0.22
0.24
0.27
0.3
20…
(200)
24…
(200)
22…
(350)
10.0 x 19.5 x 26.0
5.3
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.33
334
364
394
434
474
514
564
624
684
754
824
914
105
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
1.0
20…
(750)
24…
(125)
11.0 x 21.0 x 31.0
8.0
20…
(500)
24…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
9.7
-
20…
(100)
24…
(125)
12.6
16.3
20…
(100)
24…
(100)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
www.vishay.com
192
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (1000 Vdc)
DESCRIPTION
VALUE
Tangent of loss angle:
C 0.062 µF
0.062 µF C 0.13 µF
0.13 µF C 0.22 µF
0.22 µF C 0.33 µF
0.33 µF C 0.47 µF
at 10 kHz
5 x 10-4
6 x 10-4
8 x 10-4
8 x 10-4
8 x 10-4
at 100 kHz
15 x 10-4
20 x 10-4
25 x 10-4
30 x 10-4
35 x 10-4
Rated voltage pulse slope (dU/dt)R:
C 0.024 µF
0.024 µF C 0.062 µF
0.062 µF C 0.13 µF
0.13 µF C 0.33 µF
1700 V/µs
3300 V/µs
1200 V/µs
700 V/µs
0.33 µF C 0.47 µF
470 V/µs
R between leads, for C 1 µF at 500 V, 1 min
R between leads and case, 500 V, 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
100 000 M
30 000 M
440 V
1600 V, 1 min
2840 V, 1 min
105 °C
URdc = 1000 V; URac = 350 V; Up-p = 1000 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.01
0.011
0.012
0.013
0.015
0.016
0.018
0.02
0.022
0.024
0.027
0.030
0.033
0.036
0.039
0.043
0.047
0.051
0.056
0.062
432
472
512
562
622
682
752
822
912
103
113
123
133
153
163
183
203
223
243
273
303
333
363
393
433
473
513
563
623
30…
(1250)
34…
(1000)
32…
(1100)
33…
(950)
35…
(550)
5.0 x 11.0 (13.0) x 17.5
1.1
30…
(1000)
34…
(1000)
32…
(900)
33…
(800)
35…
(450)
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
10.0 x 16.5 (18.5) x 17.5
1.4
1.8
2.5
3.3
30…
(750)
34…
(500)
32…
(800)
33…
(700)
35…
(400)
30…
(750)
34…
(500)
32…
(650)
33…
(550)
35…
(300)
30…
(500)
34…
(450)
32…
(600)
33…
(500)
35…
(250)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
193
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX REEL
DIMENSIONS
w x h (h’) x l
C-VALUE
..YYY
C
(µF)
MASS
(g) (1)
Leads
Leads
Original pitch
(mm)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch 22.5 mm
30 ...
(200)
34…
(250)
32…
(550)
0.068
7.0 x 16.5 x 26.5
3.0
683
0.075
0.082
0.091
0.1
0.11
0.12
0.13
753
823
913
104
114
124
134
30…
(200)
34…
(250)
32…
(450)
8.5 x 18.0 x 26.0
4.2
30…
(200)
34…
(200)
32…
(350)
10.0 x 19.5 x 26.0
5.3
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.15
154
164
184
204
224
244
274
304
334
364
394
434
474
30…
(100)
34…
(125)
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
8.0
0.16
0.18
0.2
0.22
0.24
0.27
0.3
0.33
0.36
0.39
0.43
0.47
30…
(100)
34…
(125)
9.7
-
30…
(100)
34…
(125)
12.6
30…
(100)
34…
(100)
18.0 x 28.0 x 31.0
16.3
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
SPECIFIC REFERENCE DATA (1400 Vdc)
DESCRIPTION
VALUE
Tangent of loss angle:
C 0.016 µF
0.016 µF C 0.039 µF
0.039 µF C 0.13 µF
at 10 kHz
5 x 10-4
5 x 10-4
5 x 10-4
at 100 kHz
10 x 10-4
15 x 10-4
20 x 10-4
Rated voltage pulse slope (dU/dt)R:
C 0.0056 µF
0.0056 µF C 0.016 µF
0.016 µF C 0.039 µF
0.039 µF C 0.1 µF
8000 V/µs
15 000 V/µs
4000 V/µs
2100 V/µs
1500 V/µs
0.1 µF C 0.13 µF
R between leads, for C 1 µF at 500 V, 1 min
R between leads and case, 500 V, 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
100 000 M
30 000 M
500 V
2250 V, 1 min
2840 V, 1 min
105 °C
www.vishay.com
194
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 1400 V; URac = 500 V; Up-p = 1400 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.0022
0.0024
0.0027
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
113
123
133
153
163
40…
(1250)
44…
(1000)
42…
(1100)
43…
(950)
45…
(550)
5.0 x 11.0 (13.0) x 17.5
0.003
1.1
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.01
40…
(1000)
44…
(1000)
42…
(900)
43…
(800)
45…
(450)
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
1.4
1.8
40…
(750)
44…
(500)
42…
(800)
43…
(700)
45…
(400)
40…
(750)
44…
(500)
42…
(650)
43…
(550)
45…
(300)
2.5
3.3
0.011
0.012
0.013
0.015
10.0 x 16.5 (18.5) x
17.5
40…
(500)
44…
(450)
42…
(600)
43…
(500)
45…
(250)
0.016
Pitch = 22.5 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
42…
0.018
40…
(200)
44…
(250)
183
203
223
243
273
303
333
363
393
7.0 x 16.5 x 26.0
3
-
-
-
-
(550)
0.02
0.022
0.024
0.027
0.03
0.033
0.036
0.039
40…
(200)
44…
(250)
42…
(450)
8.5 x 18.0 x 26.0
4.2
40…
(200)
44…
(200)
42…
(350)
10.0 x 19.5 x 26.0
5.3
-
-
Pitch = 27.5 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.043
0.047
433
473
513
563
623
683
753
823
913
104
114
124
134
40…
44…
11.0 x 21.0 x 31.0
8
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.1
40…
(100)
44…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
9.7
-
40…
(100)
44…
(125)
12.6
16.3
0.11
0.12
0.13
40…
(100)
44…
(100)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
195
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (1600 Vdc)
DESCRIPTION
Tangent of loss angle:
C 0.015 µF
VALUE
at 10 kHz
5 x 10-4
5 x 10-4
at 100 kHz
15 x 10-4
20 x 10-4
0.015 µF C 0.15 µF
Rated voltage pulse slope (dU/dt)R:
C 0.0056 µF
0.0056 µF C 0.0075 µF
0.0075 µF C 0.039 µF
8000 V/µs
15 000 V/µs
3100 V/µs
0.039 µF C 0.1 µF
1800 V/µs
0.1 µF C 0.15 µF
1200 V/µs
R between leads, for C 1 µF at 500 V, 1 min
R between leads and case, 500 V, 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
100 000 M
30 000 M
660 V
2560 V, 1 min
2840 V, 1 min
105 °C
URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Leads
3.5 0.3
Leads
25.0 2.0
Pitch = 7.5 mm (bent back)
Ø 500 mm
Original pitch
Ø 356 mm
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.0027
0.003
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
113
123
133
153
50…
(1250)
54…
(1000)
52…
(1100)
53…
(950)
55…
(550)
5.0 x 11.0 (13.0) x 17.5
1.1
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.01
50…
(1000)
54…
(1000)
52…
(900)
53…
(800)
55…
(450)
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
10.0 x 16.5 (18.5) x 17.5
1.4
1.8
2.5
3.3
50…
(750)
54…
(500)
52…
(800)
53…
(700)
55…
(400)
50…
(750)
54…
(500)
52…
(650)
53…
(550)
55…
(300)
0.011
0.012
0.013
0.015
50…
(500)
54…
(450)
52…
(600)
53…
(500)
55…
(250)
Pitch = 22.5 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
0.016
0.018
0.02
0.022
0.024
0.027
0.03
0.033
0.036
0.039
163
183
203
223
243
273
303
333
363
393
50…
(200)
54…
(250)
52…
(550)
7.0 x 16.5 x 26.0
3.0
4.2
5.3
-
-
-
-
-
-
50…
(200)
54…
(250)
52…
(450)
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
50…
(200)
54…
(200)
52…
(350)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
www.vishay.com
196
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Leads
3.5 0.3
Leads
25.0 2.0
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
Pitch = 27.5 0.4 mm; dt= 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.043
0.047
433
473
513
563
623
683
753
823
913
104
114
124
134
154
50…
(100)
54…
(125)
11.0 x 21.0 x 31.0
8
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.1
50…
(100)
54…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
9.7
-
50…
(100)
54…
(125)
12.6
0.11
0.12
50…
(100)
54…
(100)
18.0 x 28.0 x 31.0
16.3
0.13
0.15
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
SPECIFIC REFERENCE DATA (2000 Vdc)
DESCRIPTION
Tangent of loss angle:
VALUE
at 10 kHz
at 100 kHz
C 0.01 µF
0.01 µF C 0.1 µF
5 x 10-4
10 x 10-4
15 x 10-4
18 x 10-4
Rated voltage pulse slope (dU/dt)R:
C 0.0036 µF
0.0036 µF C 0.01 µF
11 000 V/µs
20 000 V/µs
4400 V/µs
0.01 µF C 0.024 µF
0.024 µF C 0.068 µF
2500 V/µs
0.068 µF C 0.1 µF
1800 V/µs
R between leads, for C 1 µF at 500 V, 1 min
R between leads and case, 500 V, 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
100 000 M
30 000 M
750 V
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
3200 V, 1 min
2840 V, 1 min
105 °C
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
197
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 2000 V; URac = 700 V; Up-p = 2000 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Leads
3.5 0.3
Leads
25.0 2.0
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
Pitch = 15 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.001
102
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
0.0011
0.0012
0.0013
0.0015
60…
(1250)
64…
(1000)
62…
(1100)
63…
(950)
65…
(550)
5.0 x 11.0 (13.0) x 17.5
1.1
0.0016
0.0018
0.002
0.0022
0.0024
0.0027
0.003
60…
(1000)
64…
(1000)
62…
(900)
63…
(800)
65…
(450)
6.0 x 12.0 (14.0) x 17.5
7.0 x 13.5 (15.5) x 17.5
8.5 x 15.0 (17.0) x 17.5
1.4
1.8
2.5
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.01
60…
(750)
64…
(500)
62…
(800)
63…
(700)
65…
(400)
60…
(750)
64…
(500)
62…
(650)
63…
(550)
65…
(300)
60…
(500)
64…
(450)
62…
(600)
63…
(500)
65…
(250)
10.0 x 16.5 (18.5) x 17.5
3.3
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 22.5 mm
0.011
113
123
133
153
163
183
203
223
243
60…
(200)
64…
(250)
62…
(550)
0.012
0.013
0.015
0.016
0.018
0.02
7.0 x 16.5 x 26.0
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
3.0
4.2
5.3
-
-
-
-
-
-
60…
(200)
64…
(250)
62…
(450)
60…
(200)
64…
(200)
62…
(350)
0.022
0.024
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.027
0.03
273
303
333
363
393
-
60…
(100)
64…
(125)
0.033
0.036
0.039
11.0 x 21.0 x 31.0
8.0
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
www.vishay.com
198
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
..YYY
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
Leads
3.5 0.3
Leads
25.0 2.0
Pitch = 7.5 mm (bent back)
Ø 500 mm
XX
(SPQ)
Original pitch
Ø 356 mm
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
Pitch = 27.5 mm
0.043
433
473
513
563
623
683
753
823
913
104
60…
(100)
64…
(125)
0.047
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.10
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
9.7
60…
(100)
64…
(125)
12.6
-
60…
(100)
64…
(100)
18.0 x 28.0 x 31.0
16.3
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
SPECIFIC REFERENCE DATA (2500 Vdc)
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
C 0.015 µF
5 x 10-4
5 x 10-4
10 x 10-4
15x 10-4
0.015 µF C 0.056 µF
Rated voltage pulse slope (dU/dt)R:
C 0.015 µF
13 000 V/µs
6000 V/µs
0.015 µF C 0.043 µF
0.043 µF C 0.056 µF
4200 V/µs
R between leads, for C 1 µF at 500 V, 1 min
R between leads and case, 500 V, 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
100 000 M
30 000 M
1000 V
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
3500 V, 1 min
2840 V, 1 min
105 °C
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
199
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
URdc = 2500 V; URac = 900 V; Up=p = 2500 V; C-tol. = 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
Leads Leads
3.5 0.3 mm 25.0 2.0 mm
REEL
C-VALUE
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (1)
H = 18.5 mm
..YYY
XX
XX
(SPQ)
XX
(SPQ)
(SPQ)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
0.001
102
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
113
123
133
153
0.0011
0.0012
0.0013
0.0015
0.0016
0.0018
0.002
0.0022
70…
(200)
74…
(250)
72…
(600)
6.0 x 15.5 x 26.0
2.4
0.0024
0.0027
0.003
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.01
70…
(200)
74…
(250)
72…
(550)
7.0 x 16.5 x 26.0
3.0
70…
(200)
74…
(250)
72…
(450)
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
4.2
5.3
0.011
0.012
70…
(200)
74…
(200)
72…
(350)
0.013
0.015
Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm
0.016
0.018
0.02
9.0 x 19.0 x 31.0
5.9
70…
74…
163
183
203
223
243
273
303
333
363
393
433
473
513
563
70…
(100)
74…
(125)
11.0 x 21.0 x 31.0
8.0
0.022
0.024
0.027
0.03
70…
(100)
74…
(125)
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
9.7
-
0.033
0.036
0.039
0.043
0.047
0.051
0.056
70…
(100)
74…
(125)
12.6
16.3
70…
(100)
74…
(100)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packaging Quantity
www.vishay.com
200
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/docs?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
For original pitch 15 mmthe capacitors shall be mechanically fixed by the leads
For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
Product height with seating plane as given by “IEC 60717” as reference: hmax. h + 0.3 mm
bmax. = b + 0.3 mm
Eccentricity
I
max. = I + 0.3 mm
Storage Temperature
Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 ꢀ without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 ꢀ 2 ꢀ.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 ꢀ.
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
201
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
(1 kHz)
Impedance as a function of frequency (typical curve)
102
101
100
4
1 kHz
typical
2
0
max.
1.0 nF
10-1
10-2
10-3
- 2
10 nF
100 nF
- 4
- 6
1.0 F
2.2 F
min.
f (Hz)
- 60
- 20
20
60
T
amb (°C) 100
104
105
106
107
108
Max. DC and AC voltage as function of temperature
1.2
1.0
0.8
0.6
0.4
0.2
0.0
100
- 50
- 20
20
60
Tamb (°C)
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
102
102
100 nF
220
1000 nF
470 nF
85 °C ≤ Tamb 100 °C, 250 Vdc
Tamb
≤
85 °C, 250 Vdc
101
101
102
103
104
105
106
f (Hz)
107
103
104
105
106
107
108
f (Hz)
www.vishay.com
202
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
102
102
47 nF
100 n
220
470
1000 nF
nF
Tamb
≤
85 °C, 400 Vdc
104 105
85 °C < Tamb
≤
100 °C, 400 Vdc
104
101
101
103
106
107
108
102
103
105
106
f (Hz)
107
107
107
f (Hz)
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
47 nF
100 nF
102
102
220 nF
1000 nF
47 nF
100 nF
220 nF
1000 nF
470 nF
470 nF
Tamb
≤
85 °C, 630 Vdc
85 °C
<
Tamb
103
≤
100 °C, 630 Vdc
101
101
102
104
105
106
f (Hz)
103
104
105
106
107
108
f (Hz)
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
4.7 nF
10 nF
22 nF
4.7 nF
10 nF
47 nF
100 nF
220 nF
470 nF
102
102
22 nF
47 nF
100 nF
220 nF
470 nF
85 °C < Tamb
≤
100 °C, 1000 Vdc
Tamb
≤
85 °C, 1000 Vdc
104 105
101
101
102
103
104
105
106
f (Hz)
103
106
107
108
f (Hz)
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
203
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
2.2 nF
4.7 nF
10 nF
22 nF
47 nF
2.2 nF
4.7 nF
10 n
22 n
47 n
102
102
100 nF
100 nF
85 °C < Tamb ≤ 105 °C, 1400 Vdc
103 104
Tamb
≤
85 °C, 1400 Vdc
104 105
101
101
103
106
107
108
108
108
102
105
106
107
107
107
f (Hz)
f (Hz)
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
4.7 nF
4.7 nF
10 nF
10 nF
22 nF
22 nF
102
102
47 nF
100 nF
47 nF
100 nF
85 °C < Tamb
≤
100 °C, 1600 Vdc
Tamb
≤
85 °C, 1600 Vdc
104 105
101
101
103
106
107
102
103
104
105
106
f (Hz)
f (Hz)
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
1.0 nF
2.2 nF
1.0 nF
2.2 nF
4.7 nF
4.7 nF
10 nF
22 nF
10 nF
22 nF
47 nF
100 nF
47 nF
100 nF
102
102
85 °C < Tamb
≤
100 °C, 2000 Vdc
Tamb
≤
85 °C, 2000 Vdc
104 105
101
101
102
103
104
105
106
f (Hz)
103
106
107
f (Hz)
www.vishay.com
204
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
103
103
1.0 nF
2.2 nF
4.7 nF
1.0 nF
2.2 nF
4.7 nF
10 n
22 nF
47 n
10 nF
22 nF
47 nF
102
102
85 °C < Tamb
≤
105 °C, 2500 Vdc
Tamb
≤
85 °C, 2500 Vdc
104 105
101
101
102
103
104
105
106
107
f (Hz)
103
106
107
108
f (Hz)
Max. allowed component temperature rise (T)
as a function of the ambient temperature (Tamb
Insulation resistance as a function of ambient temperature
)
106
12
8
105
4
0
104
100
- 50
- 20
20
60
Tamb (°C)
0
20
40
60
80
100
amb (°C)
T
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
www.vishay.com
205
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
Tangent of loss angle as a function of frequency (typical curve)
103
16
15
14
13
12
11
102
10
20
19
18
17
9
8
7
6
5
4
3
2
1
101
100
102
103
104
105
106
(Hz)
250 V
400 V
630 V
1000 V
C 0.091 µF, curve 8
C 0.015 µF, curve 9
C 0.022 µF, curve 10
C 0.027 µF, curve 11
C 0.033 µF, curve 12
C 0.056 µF, curve 15
C 0.082 µF, curve 16
C 1.2 µF, curve 18
C 1.61 µF, curve 19
C 2.21 µF, curve 20
C 0.047 µF, curve 5
C 0.068 µF, curve 6
C 0.1 µF, curve 7
C 0.2 µF, curve8
C 0.24 µF, curve 12
C 0.36 µF, curve 13
C 0.43 µF, curve 14
C 56 µF, curve 16
C 1.1 µF, curve 17
C 0.033 µF, curve 4
C 0.068 µF, curve 5
C 0.1 µF, curve 6
C 0.15 µF, curve 7
C 0.22 µF, curve 11
C 0.27 µF, curve 12
C 0.47 µF, curve 15
C 0.68 µF, curve 16
C 0.01 µF, curve 2
C 0.027 µF, curve 3
C 0.047 µF, curve 4
C 0.062 µF, curve 5
C 0.075 µF, curve 6
C 0.1 µF, curve 7
C 0.15 µF, curve 8
C 0.22 µF, curve 9
C 0.3 µF, curve 10
C 0.39 µF, curve 11
C 0.47 µF, curve 12
140 V
1600 V
2000 V
2500 V
C 0.0047 µF, curve 1
C 0.016 µF, curve 2
C 0.033 µF, curve 3
C 0.051 µF, curve 4
C 0.068 µF, curve 5
C 0.082 µF, curve 6
C 0.1 µF, curve 7
C 0.0047 µF, curve 3
C 0.0091 µF, curve 4
C 0.068 µF, curve 5
C 0.01 µF, curve 6
C 0.15 µF, curve 7
C 0.0047 µF, curve 2
C 0.033 µF, curve 3
C 0.1 µF, curve 4
C 0.0047 µF, curve 1
C 0.015 µF, curve 2
C 0.056 µF, curve 3
HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C
HEAT CONDUCTIVITY (mW/°C)
Wmax.
(mm)
PITCH 15 mm
PITCH 22.5 mm
PITCH 27.5 mm
4.0
5.0
-
10
11
12
16
18
-
-
-
-
-
6.0
19
21
25
28
-
-
7.0
-
8.5
-
10.0
11.0
13.0
15.0
18.0
-
36
42
48
57
-
-
-
-
-
-
www.vishay.com
206
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free air ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors”.
The component temperature rise (T) can be measured (see section “Measuring the component temperature” for more details)
or calculated by T = P/G:
T = Component temperature rise (°C)
P = Power dissipation of the component (mW)
G = Heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by T = TC - Tamb
.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URdc
)
2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URac to avoid the ionisation inception level
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2 dt URdc
dU
-------
dU
-------
2
dt
dt
rated
0
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits (see graph max. allowed component
temperature rise).
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
207
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with
an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and
surge voltages from the mains included).
Voltage Conditions for 6 Above
Tamb 85 °C
URac
85 °C < Tamb 105 °C
URac
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Maximum temperature RMS-overvoltage (< 24 h)
Maximum peak voltage (VO-P) (< 2 s)
1.25 x URac
1.1 x URdc
1.25 x URac
1.6 x URdc
EXAMPLE
C = 4 nF - 1600 V used for the voltage signal shown in next drawing.
UP-P = 1000 V; UP = 900 V; T1 = 12 µs; T2 = 64 µs; T3 = 4 µs
The ambient temperature is 80 °C. In case of failure, the oscillation is blocked.
Checking conditions:
1. The peak voltage UP = 900 V is lower than 1600 Vdc
2. The peak-to-peak voltage 1000 V is lower than 22 x 550 Vac = 1600 UP-P
3. The voltage pulse slope (dU/dt) = 1000 V/4 µs = 250 V/µs
This is lower than 8000 V/µs (see specific reference data for each version)
4. The dissipated power is 35 mW as calculated with fourier terms and typical tgd.
The temperature rise for Wmax. = 6.0 mm and pitch = 15 mm will be 35 mW/11 mW/°C = 3.2 °C
This is lower than 10 °C temperature rise at 80 °C, according graph.
5. Oscillation is blocked
6. Not applicable
Voltage Signal
Voltage
Up
Up-p
Time
T3
T1
T2
www.vishay.com
208
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-17 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General Data” of
this specification
4.3.1
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
4.3
4.4
Robustness of terminations
Resistance to soldering heat
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.14
Component solvent resistance
Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2
Visual examination
No visible damage
Legible marking
Capacitance
C/C| 1 ꢀ of the value measured initially
Tangent of loss angle
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.3.1
SUB-GROUP C1B OTHER PART OF
SAMPLE OF SUB-GROUP C1
4.6.1
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
4.15
4.6
Solvent resistance of the marking
Rapid change of temperature
Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
No visible damage
Legible marking
Immersion time: 5.0 min 0.5 min
A = - 55 °C
B = + 105 °C
5 cycles
Duration t = 30 min
4.7
Vibration
Visual examination
Mounting: see section “Mounting” for more
information
No visible damage
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
209
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B OTHER PART OF
SAMPLE OF SUB-GROUP C1
4.7.2
4.9
Final inspection
Shock
Visual examination
No visible damage
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.3
Final measurements
Visual examination
Capacitance
No visible damage
C/C| 1 ꢀ of the value measured in 4.6.1
Tangent of loss angle
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.6.1
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10
Climatic sequence
4.10.2 Dry heat
Temperature: + 105 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold
Temperature: - 55 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
Voltage proof = URdc for 1 min within 15 min
after removal from testchamber
No breakdown of flash-over
Visual examination
No visible damage
Legible marking
Capacitance
For original pitch = 22.5 mm and 27.5 mm:
C/C| 3 ꢀ of the value measured in
4.4.2 or 4.9.3
Tangent of loss angle
Insulation resistance
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.3.1 or
4.6.1
50 ꢀ of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
56 days, 40 °C, 90 ꢀ to 95 ꢀ RH
no load
4.11.1 Initial measurements
4.11.3 Final measurements
Capacitance
Tangent of loss angle at 1 kHz
Voltage proof = URdc for 1 min within 15 min
after removal from testchamber
No breakdown of flash-over
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 1 ꢀ of the value measured in
4.11.1.
Tangent of loss angle
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.11.1
Insulation resistance
50 ꢀ of values specified in section
“Insulation Resistance” of this specification
www.vishay.com
210
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28124
Revision: 19-Mar-13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene
Vishay BCcomponents
Film Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C3A
4.12.1 Endurance test at 50 Hz alternating
voltage
Duration: 2000 h
1.25 x URdc at 105 °C
4.12.1.1 Initial measurements
4.12.1.3 Final measurements
Capacitance
Tangent of loss angle:
For C 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 ꢀ compared to values measured
in 4.12.1.1
Tangent of loss angle
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.12.1.1
Insulation resistance
50 ꢀ of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.2.6
Temperature charcteristics
Initial measurements
Intermediate measurements
Capacitance
For - 55 °C to + 20 °C:
Capacitance at - 55 °C
Capacitance at 20 °C
Capacitance at + 105 °C
Capacitance
+ 1 ꢀ |C/C| 3.75 ꢀ or
for 20 °C to 105 °C:
- 6 ꢀ |C/C| 0 ꢀ
Final measurements
Charge and discharge
As specified in section “Capacitance” of this
specification.
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
4.13
10 000 cycles
Charged to URdc
Discharge resistance:
URdc
-------------------------------------------------------------
R =
5 x C x 2.5 x dU dt
4.13.1 Initial measurements
4.13.3 Final measurements
Capacitance
Tangent of loss angle:
For C 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
Capacitance
|C/C| 1 ꢀ compared to values measured
in 4.13.1
Tangent of loss angle
Increase of tan
0.0005 for: C 100 nF or
0.001 for: 100 nF < C 470 nF or
0.0015 for: C 470 nF
Compared to values measured in 4.13.1
Insulation resistance
50 ꢀ of values specified in section
“Insulation Resistance” of this specification
Document Number: 28124
Revision: 19-Mar-13
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
211
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
BFC238360433
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.043 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360472
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0047 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360473
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.047 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360512
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0051 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360513
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.051 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360562
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0056 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360563
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.056 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360622
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0062 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360623
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.062 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360682
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360683
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC238360752
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000 V, 0.0075 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明