BFC233844474 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.47 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;型号: | BFC233844474 |
厂家: | VISHAY |
描述: | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.47 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
文件: | 总12页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
Interference Suppression Film Capacitors - Class X2
Radial MKP 300 VAC - Standard Across The Line X2
FEATURES
• 15 mm to 55 mm lead pitch
• 7 A max. IRMS at 10 μF
• Self-healing properties
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
For across the line X2 applications.
Please see section Application Notes in this specification
and especially www.vishay.com/doc?28153.
QUICK REFERENCE DATA
0.01 μF to 10 μF
(preferred values according to E6)
Capacitance range (E12 series)
Capacitance tolerance
Rated AC voltage
20 %, 10 %
300 VAC; 50 Hz to 60 Hz
800 VDC at 85 °C
630 VDC at 110 °C
Permissible DC voltage
55/105/56/C for product volumes 1750 mm3
Climatic testing class according to IEC 60068-1
55/105/56/B for product volumes > 1750 mm3
Rated temperature
105 °C
105 °C
Maximum application temperature
IEC 60384-14 ed-4 (2013) and EN 60384-14
IEC 60065 pass. flamm. class B for volumes > 1750 mm3
ENEC; UL 60384-14
Reference standards
Dielectric
Polypropylene film
Metallized film
Electrodes
Mono construction
Construction
Encapsulation
Leads
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;
code for dielectric material; manufacturer location, year and week;
manufacturer’s logo or name; safety approvals
Marking
Note
•
For more detailed data and test requirements, contact rfi@vishay.com
DIMENSIONS
l
w
h
lt
Ø dt
P
Revision: 21-Sep-16
Document Number: 28118
1
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TYPE AND PITCHES
CAPACITANCE
(numerically)
ꢂ5.ꢀ mm
ꢂ
3
4
5
6
22.5 mm
338 4
ꢂꢀ
27.5 mm
X2
ꢂꢀꢀ
ꢂꢀꢀꢀ
37.5 mm
Example:
55.ꢀ mm
ꢂꢀ4 = ꢂꢀ x ꢂꢀ = ꢂꢀꢀ nF
BFC2 338
4 XX X
TYPE
PACKAGING
STANDARD DIMENSIONS
Lead length 3.5 mm ꢀ.3 mm
Lead length 5.ꢀ mm ꢂ.ꢀ mm
Lead length 25.ꢀ mm 2.ꢀ mm
ꢂ5.ꢀ mm
C-TOL.
PREFERRED TYPES
BFC2 338 44 ...
BFC2 338 4ꢀ ...
BFC2 338 4ꢂ ...
BFC2 338 4. ...
ON REQUEST
Loose in box
2ꢀ ꢁ
Taped (ꢂ)(2)
PACKAGING
ALTERNATIVE PITCH SIZES
C-TOL.
Lead length 3.5 mm ꢀ.3 mm
Lead length 5.ꢀ mm ꢂ.ꢀ mm
Lead length 25.ꢀ mm 2.ꢀ mm
ALTERNATIVE TAPED VERSION
H = ꢂ8.5 mm; for Pꢀ = ꢂ2.7 mm
ALTERNATIVE C-TOL.
Loose in box
2ꢀ ꢁ
See tables for details
338 4
X2
PACKAGING
Taped(ꢂ)(2)
PACKAGING
C-TOL.
2ꢀ ꢁ
C-TOL.
ON REQUEST
See tables for details
ON REQUEST
Lead length 3.5 mm ꢀ.3 mm
Lead length 5.ꢀ mm ꢂ.ꢀ mm
Lead length 25.ꢀ mm 2.ꢀ mm
ꢂ5.ꢀ mm
Loose in box
Taped(ꢂ)(2)
ꢂꢀ ꢁ
See tables for details
H = ꢂ8.5 mm; Pꢀ = ꢂ2.7 mm
Notes
(1)
For detailed tape specification refer to packaging information: www.vishay.com/doc?28139
Tape on reel pitch = 27.5 mm is not available
(2)
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Tangent of loss angle:
at 1 kHz
at 10 kHz
20 x 10-4
70 x 10-4
-
at 100 kHz
100 x 10-4
Pitch = 15 mm; 22.5 mm and 27.5 mm for C 470 nF
Pitch = 15 mm; 22.5 mm and 27.5 mm for 470 nF < C 1 μF
Pitch = 15 mm; 22.5 mm and 27.5 mm for 1 μF < C 3.3 μF
Pitch = 37.5 mm and 55 mm for 2.2 μF < C 4.7 μF
Pitch = 37.5 mm and 55 mm for 4.7 μF < C 10 μF
Rated voltage pulse slope (dU/dt)R at 420 VDC
R between leads, for C 0.33 μF at 100 V; 1 min
RC between leads, for C > 0.33 μF at 100 V; 1 min
R between leads and case; 100 V; 1 min
10 x 10-4
20 x 10-4
30 x 10-4
50 x 10-4
100 x 10-4
-
-
-
-
-
-
100 V/μs
15 000 M
> 5000 s
30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s:
C 1 μF
2200 V; 1 min
1850 V; 1 min
1400 V; 1 min
2200 V; 1 min
1 μF < C 3.3 μF (not pitch = 37.5 mm)
Pitch = 37.5 mm and 55 mm
Withstanding (AC) voltage between leads and case
Note
(1)
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
Revision: 21-Sep-16
Document Number: 28118
2
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER BFC2 338 ..... AND PACKAGING
LOOSE IN BOX
(1)(2)
REEL
DIMENSIONS
Ø = 500 mm
H = 18.5 mm;
P0 = 12.7 mm
URAC
(V)
CAP.
(μF)
MASS (3)
(g)
w x h x l
(mm)
SHORT LEADS
LONG LEADS
lt = 3.5 mm
0.3 mm
lt = 5.0 mm
1.0 mm
lt = 25.0 mm
2.0 mm
SPQ
SPQ
SPQ
PITCH = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 20 ꢀ
0.010
0.015
0.022
0.033
0.047
0.068
0.10
44103
44153
44223
44333
44473
44683
44104
40103
40153
40223
40333
40473
40683
40104
41103
41153
41223
41333
41473
41683
41104
48127
48128
48129
48131
48132
48133
48134
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1000
1000
1000
1000
1000
1.4
1000
PITCH = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ
0.15
0.22
0.33
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
1.8
2.4
3.0
44154
44224
44334
40154
40224
40334
750
750
500
41154
41224
41334
500
500
450
48135
48136
48137
500
500
600
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ
0.22
0.33
0.47
0.68
1.0
48101
48103
44474
44684
44105
48109
48112
40474
40684
40105
48118
48121
41474
41684
41105
7.0 x 16.5 x 26.0
2.9
200
250
300
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
12.0 x 22.0 x 26.0
3.8
6.8
7.8
200
200
150
250
200
200
-
-
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ
0.47
0.68
1.0
9.0 x 19.0 x 31.0
5.5
48104
48106
48108
44155
44225
44335
48113
48115
48117
40155
40225
40335
100
48122
48124
48126
41155
41225
41335
150
150
11.0 x 21.0 x 31.0
7.4
100
-
-
1.5
15.0 x 25.0 x 31.0
18.0 x 28.0 x 31.0
21.0 x 31.0 x 31.0
12.3
16.1
20.3
100
100
50
125
100
75
2.2
3.3
PITCH = 37.5 mm 0.7 mm; dt = 1.0 mm 0.1 mm; C-TOL. = 20 ꢀ
4.7
6.8
10
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
30.0 x 46.0 x 44.0
29.0
35.0
55.0
40475
40685
48159
105
91
41475
41685
48161
105
91
-
-
-
-
-
63
63
PITCH = 55.0 mm 1.0 mm; dt = 1.0 mm 0.1 mm; C-TOL. = 20 ꢀ
50.0 40106 65 41106
PITCH = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 10 ꢀ
10
21.5 x 38.5 x 61.0
-
65
0.010
0.015
0.022
0.033
0.047
0.068
0.10
45103
45153
45223
45333
45473
45683
45104
42103
42153
42223
42333
42473
42683
42104
43103
43153
43223
43333
43473
43683
43104
48138
48141
48143
48145
48147
48149
48153
300
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1000
1000
1000
1000
1000
1000
Revision: 21-Sep-16
Document Number: 28118
3
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER BFC2 338 ..... AND PACKAGING
(1)(2)
LOOSE IN BOX
REEL
DIMENSIONS
Ø = 500 mm
H = 18.5 mm;
P0 = 12.7 mm
URAC
(V)
CAP.
(μF)
MASS (3)
(g)
w x h x l
(mm)
SHORT LEADS
LONG LEADS
lt = 3.5 mm
0.3 mm
lt = 5.0 mm
1.0 mm
lt = 25.0 mm
2.0 mm
SPQ
SPQ
SPQ
PITCH = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ
0.12
0.15
0.18
0.22
0.27
45124
45154
45184
45224
45274
42124
42154
42184
42224
42274
43124
43154
43184
43224
43274
48154
48155
48156
48157
48158
7.0 x 13.5 x 17.5
1.8
750
500
500
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
2.4
3.0
750
500
500
450
500
600
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ
0.33
0.47
0.68
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
12.0 x 22.0 x 26.0
3.8
6.8
7.8
45334
45474
45684
42334
42474
42684
200
200
150
43334
43474
43684
250
200
200
-
-
-
-
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ
1.0
1.5
2.2
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
21.0 x 31.0 x 31.0
9.2
45105
45155
45225
42105
42155
42225
100
100
50
43105
43155
43225
125
125
75
12.3
20.3
300
PITCH = 37.5 mm 0.7 mm; dt = 1.0 mm 0.1 mm; C-TOL. = 10 ꢀ
3.3
3.9
4.7
5.6
6.8
8.2
10
42335
42395
42475
42565
48162
48163
48164
43335
43395
43475
43565
48165
48166
48167
18.5 x 35.5 x 43.0
21.5 x 38.5 x 43.0
32.0
39.0
105
91
105
91
-
-
-
30.0 x 46.0 x 44.0
30.0 x 46.0 x 44.0
55.0
65.0
63
63
65
PITCH = 55.0 mm 1.0 mm; dt = 1.0 mm 0.1 mm; C-TOL. = 10 ꢀ
6.8
8.2
10
42685
42825
42106
43685
43825
43106
21.5 x 38.5 x 61.0
50.0
-
65
-
-
Notes
•
SPQ = Standard Packing Quantity
H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
Reel diameter = 356 mm is available on request
(1)
(2)
(3)
Weight for short lead product only
Revision: 21-Sep-16
Document Number: 28118
4
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
300 VAC
10 nF to 10 μF
FI 2016051
www.vishay.com/doc?28208
UL 60384-14
300 VAC
300 VAC
300 VAC
10 nF to 10 μF
10 nF to 10 μF
10 nF to 10 μF
E354331
E354331
FI 9368
www.vishay.com/doc?28187
www.vishay.com/doc?28207
CSA-E384-14
CB-test certificate
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland; and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax. ) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm; h = 0.1 mm
• For products with 15 mm < pitch 37.5 mm, w = l = 0.7 mm; h = 0.5 mm
• For products with 15 mm < pitch 52.5 mm, w = l = 1.0 mm; h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
CBA116
Imax. = I + Δ
hmax. = h + Δ
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 21-Sep-16
Document Number: 28118
5
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
CHARACTERISTICS
ꢂꢀ3
4
2
ꢂꢀ nF
47 nF
typical
ꢂꢀꢀ nF
ꢂꢀꢂ
ꢂꢀꢀ
ꢀ
- 2
- 4
- 6
47ꢀ nF
max.
ꢂꢀꢀꢀ nF
47ꢀꢀ nF
ꢂꢀ µF
ꢂꢀ-ꢂ
ꢂꢀ-2
min.
-5ꢀ
ꢀ
5ꢀ
Tamb (°C) ꢂꢀꢀ
ꢂꢀ4
ꢂꢀ5
ꢂꢀ6
ꢂꢀ7
ꢂꢀ8
f (Hz)
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
ꢂꢀ3
ꢂꢀ2
ꢂꢀꢂ
ꢂꢀ2
ꢂꢀꢂ
ꢂꢀꢀ
ꢂꢀꢀ
ꢂꢀ-ꢂ
ꢂꢀꢂ
ꢂꢀ2
ꢂꢀ3
ꢂꢀ4
ꢂꢀ5
f (Hz)
ꢂ
ꢂꢀ
ꢂꢀꢀ
ꢂꢀꢀꢀ C (nF) ꢂꢀ ꢀꢀꢀ
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
ꢂꢀ3
ꢂꢀ4
ꢂꢀ ꢀꢀꢀ nF
47ꢀꢀ nF
ꢂꢀꢀꢀ nF
47ꢀ nF
ꢂꢀ2
ꢂꢀꢂ
ꢂꢀꢀ nF
47 nF
ꢂꢀ2
ꢂꢀ nF
ꢂꢀꢀ
Tamb ≤ ꢂꢀ5 °C
Tamb ≤ ꢂꢀ5 °C
ꢂꢀꢂ
ꢂꢀꢂ
ꢂꢀ-ꢂ
ꢂꢀ2
Max. RMS voltage as a function of frequency
ꢂꢀ3
ꢂꢀ4
ꢂꢀ5
ꢂꢀꢂ
ꢂꢀ2
ꢂꢀ3
ꢂꢀ4
ꢂꢀ5
f (Hz)
f (Hz)
Max. RMS current as a function of frequency
Revision: 21-Sep-16
Document Number: 28118
6
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
ꢂꢀ6
ꢂꢀ5
ꢂꢀ4
8ꢀ
ꢀ
2ꢀ
4ꢀ
6ꢀ
ꢂꢀꢀ
Tamb (°C)
Insulation resistance
APPLICATION NOTES
• For X2 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 300 VAC
.
• For series impedance applications we refer to application note www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-4 (2013) and Specific Reference Data.”
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.3 Robustness of terminations
Tensile:
No visible damage
for wire diameter = 0.6 mm and 0.8 mm: load
10 N; 10 s
for wire diameter = 1 mm:
load 20 N; 10 s
Bending:
for wire diameter = 0.6 mm and 0.8 mm:
load 5 N; 4 x 90°
for wire diameter = 1 mm:
load 10 N; 4 x 90°
Revision: 21-Sep-16
Document Number: 28118
7
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.4 Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time:
min. 1 h, max 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in chapters “General data” of
this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
No visible damage
Legible marking
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5 min. 0.5 min
4.6 Rapid change of temperature
A = -55 °C
B = +105 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection
4.7 Vibration
Visual examination
Mounting: see section “Mounting” of this
specification
No visible damage
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢀ
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting: see section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/sꢀ
Duration of pulse: 11 ms
Revision: 21-Sep-16
Document Number: 28118
8
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
4.9.2 Final measurements
Visual examination
Capacitance
No visible damage
|C/C| 5 % of the value measured initially
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Tangent of loss angle
Insulation resistance
Increase of tan 0.008
Compared to values measured initially
As specified in chapters “General data” of
this specification
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS C1A AND
C1B
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance:
measured in 4.4.2 and 4.9.2
Tangent of loss angle:
measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: -55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
Remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.11.1
Voltage proof
No permanent breakdown or flash-over
1290 VDC; pitch 27.5 mm
1320 VDC; pitch > 27.5 mm
1 min between terminals
Insulation resistance
50 % of values specified in chapters
“General data” of this specification
Revision: 21-Sep-16
Document Number: 28118
9
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C2
CONDITIONS
PERFORMANCE REQUIREMENTS
4.12 Damp heat steady state
4.12.1 Initial measurements
4.12.3 Final measurements
56 days, 40 °C, 90 % to 95 % RH
No load
Capacitance
Tangent of loss angle at 1 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.12.1
Voltage proof
No permanent breakdown or flash-over
1290 VDC; pitch 27.5 mm
1320 VDC; pitch > 27.5 mm
1 min between terminals
Insulation resistance
50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
for C 1 μF at 10 kHz
for C > 1 μF at 1 kHz
4.13 Impulse voltage
4.14 Endurance
3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C 1 μF
X2: 2.5 kV for C > 1 μF
Max. 24 pulses
No self healing breakdowns or flash-over
Duration: 1000 h
1.25 x URAC at 105 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of 47
5 %
4.14.7 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.13.1
Voltage proof
No permanent breakdown or flash-over
1290 VDC; pitch 27.5 mm
1320 VDC; pitch > 27.5 mm
1 min between terminals
2200 VAC; 1 min between terminals
and case
Insulation resistance
50 % of values specified in chapters
“General data” of this specification
Revision: 21-Sep-16
Document Number: 28118
10
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 4 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C4
CONDITIONS
PERFORMANCE REQUIREMENTS
4.15 Charge and discharge
10 000 cycles
Charged to 420 VDC
Discharge resistance:
420 VDC
R = ---------------------------------------
1.5 x C (dU/dt)
4.15.1 Initial measurements
4.15.3 Final measurements
Capacitance
Tangent of loss angle at 10 kHz
Capacitance
|C/C| 10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.15.1
Insulation resistance
Resonance frequency
50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency characteristic
0.9 times value as specified in section
“Resonant frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mmꢁ:
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop
from the sample.
Class B
V 250: 10 s
250 < V 500: 20 s
500 < V 1750: 30 s
V > 1750: 60 s
One flame application
ꢂ2 mm
~ 8 mm
45.ꢀ°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 4 kV discharges on the test
The cheese cloth around the capacitors shall
not burn with a flame.
capacitor connected to URAC
.
No electrical measurements are required.
Revision: 21-Sep-16
Document Number: 28118
11
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
BFC233844684
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233845105
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 1 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233845155
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233845223
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233845333
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.033 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明