BFC233818228 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.12 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;
| 型号： | BFC233818228 |
| 厂家： | 
VISHAY |
| 描述： | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.12 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总14页 (文件大小：135K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MKP338 1 X1
Vishay BCcomponents
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
l
l
w
w
15 mm to 27.5 mm lead pitch and 15 mm bent
back to 7.5 mm
Supplied loose in box, taped on ammopack or
reel
h
h
h'
H
F'
F
l
t
(1)
Ø dt
Ø dt
P
Compliant to RoHS Directive 2002/95/EC
10
15
PERMISSIBLE DC VOLTAGE
Dimensions in mm
DC 1000 V
Note
(1)
|F - F’| < 0.3 mm
F = 7.5 mm + 0.6 mm/- 0.1 mm
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
APPLICATIONS
For standard across the line X1 applications.
See also Application Note:
www.vishay.com/doc?28153
CLIMATIC TESTING CLASS ACC. TO
IEC 60068-1
55/105/56/B
REFERENCE STANDARDS
CAPACITANCE RANGE (E12 SERIES)
“IEC 60384-14 ed-3 and EN 60384-14”
“IEC 60065, pass. flamm. class B”
UL1414; UL1283; CSA-C22.2 No. 8
E12 series 0.01 µF to 1 µF
Preferred values acc. to E6
CAPACITANCE TOLERANCE
MARKING
20 %; 10 %; 5 %
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type designation; code for dielectric material; manufacturer
location; manufacturer’s logo; year, week and safety
approvals.
LEADS
Tinned wire
DIELECTRIC
MAXIMUM APPLICATION TEMPERATURE
Polypropylene film
105 °C
ELECTRODES
DETAIL SPECIFICATION
Metallized film
For more detailed data and test requirements contact:
RFI@vishay.com
CONSTRUCTION
Mono construction
RATED VOLTAGE
AC 440 V; 50 Hz to 60 Hz
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
383
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
7.5 mm (bent back)
338 1
0.1
1
2
3
4
5
15.0 mm
22.5 mm
X1
Example:
104 = 10 x 10 = 100 nF
(except special numbers)
10
100
27.5 mm
BFC2
338 1X XX X
2222 (*) 338 1X XX X
(*) Old ordering code
TYPE
PACKAGING
LEAD CONFIGURATION
Lead length 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
Lead length 25.0 mm 2.0 mm
Bent back to 7.5 mm;
C-TOL
PREFERRED TYPES
BFC2 338 10 ...
BFC2 338 12 ...
BFC2 338 14 ...
Loose in box
338 1
X1
20 %
Taped on reel (1)
Taped on reel (1)
BFC2 338 16 ...
H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm
ALTERNATIVE TAPED VERSIONS
ON REQUEST
338 1
X1
H = 18.5 mm; for P0 12.7 mm; reel diameter 500 mm
20 %
BFC2 338 17 ...
X1
ALTERNATIVE C-TOL.
ON REQUEST
10 %
5 %
Lead length 3.5 mm 0.3 mm
10 %
5 %
10 %
5 %
Loose in box
Lead length 5.0 mm 1.0 mm
Lead length 25.0 mm 2.0 mm
338 1
X1
See tables for detail
Bent back to 7.5 mm;
H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm
10 %
5 %
Taped on reel (1)
10 %
5 %
H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm
Note
(1) For detailed tape specification refer to Packaging Information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URAC
)
440 V
Permissible DC voltage (URDC
Tangent of loss angle:
C 470 nF
)
1000 V
at 1 kHz
10 x 10-4
20 x 10-4
at 10 kHz
20 x 10-4
70 x 10-4
C 470 nF
Rated voltage pulse slope (dU/dt)R at 615 VDC
Pitch = 15 mm and 7.5 mm (bent back)
Pitch = 22.5 mm
250 V/µs
150 V/µs
100 V/µs
Pitch = 27.5 mm
R between leads, for C 0.33 µF at 100 V, 1 min
RC between leads, for C > 0.33 µF at 100 V, 1 min
R between leads and case, 100 V, 1 min
Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s
Withstanding (AC) voltage between leads and case
Maximum application temperature
> 15 000 M
>5000 s
> 30 000 M
3400 V, 1 min
2380 V, 1 min
105 °C
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
www.vishay.com
384
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
C-tol. = ꢀ2 ꢁ
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
Reel diameter = 522 mm (1)(ꢀ)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
lt =
lt
=
lt =
5.2 mm
1.2 mm
H = 18.5 mm;
SPQ
3.5 mm
2.3 mm
SPQ
ꢀ5.2 mm
SPQ
P2 = 1ꢀ.7 mm
ꢀ.2 mm
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.62 mm 2.26 mm
0.01
10103
10123
10153
10183
10223
10273
10333
12103
12123
12153
12183
12223
12273
12333
14103
14123
14153
14183
14223
14273
14333
17103
17123
0.012
0.015
0.018
0.022
0.027
0.033
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1000
1000
1000
1000
17153
17183
17223
17273
17333
1100
900
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.039
0.047
0.056
0.068
0.082
0.1
10393
10473
10563
10683
10823
10104
12393
12473
12563
12683
12823
12104
14393
14473
14563
14683
14823
14104
17393
17473
17563
17683
17823
17104
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
1.8
2.4
3.0
750
750
500
500
500
450
800
650
600
Pitch = ꢀꢀ.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.12
0.15
0.18
0.22
10124
10154
10184
10224
12124
12154
12184
12224
14124
14154
14184
14224
17124
17154
17184
17224
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
3.8
6.8
200
200
250
200
450
350
Pitch = ꢀ7.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.00
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
7.4
9.2
10274
10334
10394
10474
10564
10684
10824
10105
12274
12334
12394
12474
12564
12684
12824
12105
100
100
14274
14334
14394
14474
14564
14684
14824
14105
125
125
15.0 x 25.0 x 31.5
18.0 x 28.0 x 31.5
21.0 x 31.0 x 31.0
12.3
16.1
20.3
100
100
50
125
100
75
Notes
•
SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
385
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
Bent back pitch 7.5 mm (only taped); C-tol. = ꢀ2 ꢁ
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
Reel diameter = 522 mm (1)(ꢀ)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
lt
=
lt =
5.2 mm
1.2 mm
lt =
ꢀ5.2 mm
ꢀ.2 mm
H = 16.2 mm;
SPQ
3.5 mm
2.3 mm
SPQ
SPQ
P2 = 15.2 mm
Original pitch = 15.2 mm; bent back pitch = 7.5 mm 2.ꢂ mm; dt = 2.62 mm 2.26 mm
0.010
0.012
16103
16123
0.015
0.018
0.022
0.027
0.033
5.0 x 13.0 x 17.5
6.0 x 14.0 x 17.5
1.0
1.4
16153
16183
16223
16273
16333
950
800
Original pitch = 15.2 mm; bent back pitch = 7.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.039
16393
16473
16563
16683
16823
16104
7.0 x 15.5 x 17.5
8.5 x 17.0 x 17.5
10.0 x 18.5 x 17.5
1.8
1.4
3.0
700
550
500
0.047
0.056
0.068
0.082
0.100
Notes
SPQ = Standard Packing Quantity
•
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
C-tol. = 12 ꢁ
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
Reel diameter = 522 mm (1)(ꢀ)
lt
=
lt =
5.2 mm
1.2 mm
lt =
H = 18.5 mm;
SPQ
3.5 mm
2.3 mm
SPQ
ꢀ5.2 mm
SPQ
P2 = 1ꢀ.7 mm
ꢀ.2 mm
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.62 mm 2.26 mm
0.010
0.012
0.015
0.018
0.022
0.027
18114
18115
18116
18117
18118
18119
18314
18315
18316
18317
18318
18319
18514
18515
18516
18517
18518
18519
18914
18915
1100
5.0 x 11.0 x 17.5
1.0
1000
1000
1000
1000
18916
18917
18918
900
6.0 x 12.0 x 17.5
1.4
18919
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.033
0.039
0.047
0.056
0.068
0.082
18121
18122
18123
18124
18125
18126
18321
18322
18323
18324
18325
18326
18521
18522
18523
18524
18525
18526
18921
800
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
1.8
2.4
3.0
750
750
500
500
500
450
18922
18923
650
18924
18925
600
18926
www.vishay.com
386
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
lt =
Reel diameter = 522 mm (1)(ꢀ)
lt
=
lt =
5.2 mm
1.2 mm
H = 18.5 mm;
SPQ
3.5 mm
2.3 mm
SPQ
ꢀ5.2 mm
SPQ
P2 = 1ꢀ.7 mm
ꢀ.2 mm
Pitch = ꢀꢀ.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.10
0.12
0.15
0.18
7.0 x 16.5 x 26.0
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
2.9
3.8
6.8
18127
18128
18129
18131
18327
18328
18329
18331
200
200
200
18527
18528
18529
18531
250
250
200
18927
18928
18929
18931
550
450
350
Pitch = ꢀ7.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
18132
18133
18134
18135
18136
18137
18138
18139
18332
18333
18334
18335
18336
18337
18338
18339
18532
18533
18534
18535
18536
18537
18538
18539
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.0
7.4
9.2
100
100
100
125
125
125
12.3
18.0 x 28.0 x 31.0
21.0 x 31.0 x 31.0
16.1
20.3
100
50
100
75
Notes
•
SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Bent back pitch 7.5 mm (only taped); C-tol. = 12 ꢁ
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
Reel diameter = 522 mm (1)(ꢀ)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
lt =
ꢀ5.2 mm
ꢀ.2 mm
lt
=
lt =
5.2 mm
1.2 mm
H = 18.5 mm;
SPQ
3.5 mm
2.3 mm
SPQ
SPQ
P2 = 1ꢀ.7 mm
Original pitch = 15.2 mm; bent back pitch = 7.5 mm 2.ꢂ mm; dt = 2.62 mm 2.26 mm
0.010
0.012
0.015
0.018
0.022
0.027
18714
18715
18716
18717
18718
18719
5.0 x 13.0 x 17.5
6.0 x 14.0 x 17.5
1.0
1.4
950
800
Original pitch = 15.2 mm; bent back pitch = 7.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.033
18721
700
7.0 x 15.5 x 17.5
8.5 x 17.0 x 17.5
10.0 x 18.5 x 17.5
1.8
2.4
3.0
0.039
0.047
0.056
0.068
0.082
18722
18723
18724
550
18725
18726
500
Notes
SPQ = Standard Packing Quantity
•
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
387
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
C-tol. = 5 ꢁ
DIMENSIONS
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
Reel diameter = 522 mm (1)(ꢀ)
C
MASS
(g) (3)
Short leads
Long leads
lt =
w x h x l
(mm)
(µF)
lt
=
lt =
5.2 mm
1.2 mm
H = 18.5 mm;
SPQ
3.5 mm
2.3 mm
SPQ
ꢀ5.2 mm
SPQ
P2 = 1ꢀ.7 mm
ꢀ.2 mm
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.62 mm 2.26 mm
0.010
0.012
0.015
0.018
0.022
0.027
18214
18215
18216
18217
18218
18219
18414
18415
18416
18417
18418
18419
18614
18615
18616
18617
18618
18619
18934
18935
18936
18937
18938
18939
5.0 x 11.0 x 17.5
1.0
1000
1000
1000
1000
1100
6.0 x 12.0 x 17.5
1.4
900
Pitch = 15.2 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.033
0.039
0.047
0.056
0.068
0.082
18221
18222
18223
18224
18225
18226
18421
18422
18423
18424
18425
18426
18621
18622
18623
18624
18625
18626
18941
800
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
1.8
2.4
3.0
750
750
500
500
500
450
18942
18943
18944
650
18945
18946
600
Pitch = ꢀꢀ.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.10
0.12
0.15
0.18
18227
18228
18229
18231
18427
18428
18429
18431
18627
18628
18629
18631
18947
450
8.5 x 18.0 x 26.0
3.8
200
200
250
200
18948
18949
10.0 x 19.5 x 26.0
6.8
350
18951
Pitch = ꢀ7.5 mm 2.ꢂ mm; dt = 2.82 mm 2.28 mm
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
11.0 x 21.0 x 31.0
7.4
18232
18233
18234
18235
18236
18237
18238
18239
18432
18433
18434
18435
18436
18437
18438
18439
100
100
18632
18633
18634
18635
18636
18637
18638
18639
125
125
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.5
12.3
100
125
18.0 x 28.0 x 31.5
21.0 x 31.0 x 31.0
16.1
20.3
100
50
100
75
Notes
•
SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Bent back pitch (only taped); C-tol. = 5 ꢁ
CATALOG NUMBER BFCꢀ 338 1XXXX AND PACKAGING
LOOSE IN BOX
TAPED
DIMENSIONS
w x h x l
(mm)
Reel diameter = 522 mm (1)
C
(µF)
MASS
(g) (3)
Short leads
Long leads
lt =
ꢀ5.2 mm
ꢀ.2 mm
lt
=
lt =
5.2 mm
1.2 mm
H = 16.2 mm;
SPQ
3.5 mm
2.3 mm
SPQ
SPQ
P2 = 15.2 mm
Original pitch = 15.2 mm; bent back pitch = 7.5 2.ꢂ mm; dt = 2.62 2.26 mm
0.010
18814
0.012
18815
18816
18817
18818
5.0 x 13.0 x 17.5
6.0 x 14.0 x 17.5
1.0
1.4
950
0.015
0.018
0.022
0.027
800
18819
Original pitch = 15.2 mm; bent back pitch = 7.5 2.ꢂ mm; dt = 2.82 2.28 mm
0.033
18821
700
7.0 x 15.5 x 17.5
8.5 x 17.0 x 17.5
10.0 x 18.5 x 17.5
1.8
2.4
3.0
0.039
0.047
0.056
0.068
0.082
18822
18823
18824
550
18825
18826
500
Notes
SPQ = Standard Packing Quantity
•
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
www.vishay.com
388
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
APPROVALS
SAFETY APPROVALS X1
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
UL1414
440 VAC
10 nF to 1 µF
FI 2008060 A1
250 VAC
440 VAC
440 VAC
440 VAC
10 nF to 1 µF
10 nF to 100 nF
100 nF to 1 µF
10 nF to 1 µF
E112471
E109565
E109565
FI 5256 A1
UL1283
UL1283 and (CSA-C22.2 No. 8)
CB-Test Certificate
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
®
16
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to: “Packaging Information”: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
For pitches 15 mm capacitors shall be mechanically fixed by the leads
For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and heigth (hmax. ) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
CBA116
Imax. = I + Δ
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
389
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
Tangent of loss angle as a function of frequency (typical curve)
103
4
2
0
typical
102
max.
220 nF
≤
- 2
- 4
- 6
C
101
47 nF <
min.
100
101
102
103
104
105
f(Hz)
- 50
0
50
Tamb (°C) 100
Impedance as a function of frequency (typical curve)
Resonant frequency as a function of capacitance (typical curve)
102
103
102
101
10 nF
47 nF
101
100 nF
470 nF
1000 n
100
10-1
10-2
X 1
100
10-1
104
105
106
107
f (Hz) 108
1
100
1000
10 000
°C (nF)
10
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
103
102
101
104
1000 nF
470 nF
103
102
100 nF
47 nF
10 nF
4.7 nF
101
100
1 nF
Tamb ≤ 105 °C
Tamb ≤ 105 °C
10-1
101
102
103
104
f (Hz) 105
101
102
103
104
105
f (Hz)
www.vishay.com
390
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
Insulation resistance as a function of ambient temperature
106
105
104
80
0
20
40
60
100
Tamb (°C)
APPLICATION NOTES
For X1 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 440 VAC
.
For series impedance applications we refer to Application Note www.vishay.com/doc?28153
For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
The maximum ambient temperature must not exceed 105 °C.
Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 VDC and
divided by the applied voltage.
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
391
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes:
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-3 and Specific Reference Data.”
Group C Inspection Requirements
SUB-CLAUSE NUMBER
CONDITIONS
PERFORMANCE REQUIREMENTS
AND TEST
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.3
4.4
Robustness o terminations
Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
4.19 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time:
Min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: cotton wool
Immersion time: 5 min 0.5 min
4.6
Rapid change of temperature
A = - 55 °C
B = + 105 °C
5 cycles
Duration t = 30 min
www.vishay.com
392
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
SUB-CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
4.6.1 Inspection
Visual examination
Mounting: See section “Mounting” of this
specification
No visible damage
4.7
Vibration
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting: See section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.2 Final measurements
Visual examination
Capacitance
No visible damage
C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS C1A AND
C1B
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: - 55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
Remaining cycles
4.11.6 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
C/C| 5 % of the value measured in
4.11.1.
Tangent of loss angle
Increase of tan 0.008
Compared to values measured in
4.11.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
393
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
SUB-CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP Cꢀ
4.12 Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements
4.12.3 Final measurements
Capacitance
Tangent of loss angle at 1 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in
4.12.1.
Tangent of loss angle
Increase of tan 0.008
Compared to values measured in
4.12.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.13 Impulse voltage
4.14 Endurance
3 successive impulses, full wave, peak
voltage:
X1: 4 kV
Max. 24 pulses
No self healing breakdowns or flash-over
Duration: 1000 h
1.25 x URAC at 105 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47 5 %
4.14.7 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 10 % compared to values
measured in 4.13.1.
Tangent of loss angle
Increase of tan 0.008
Compared to values measured in 4.13.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
2380 VAC; 1 min between terminations
and case.
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP Cꢂ
10 000 cycles
4.15 Charge and discharge
Charged to 615 VDC
Discharge resistance:
615 VDC
---------------------------------------
R =
1.5 x C (dU/dt)
4.15.1 Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
www.vishay.com
394
For technical questions, contact: RFI@vishay.com
Document Number: 28116
Revision: 23-Feb-11
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
SUB-CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
4.15.3 Final measurements
Capacitance
|C/C| 10 % compared to values
measured in 4.15.1.
Tangent of loss angle
Insulation resistance
Increase of tan 0.008
Compared to values measured in 4.15.1.
50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency characteristic
Resonance frequency
0.9 times value as specified in section
“Resonant Frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V 250: 10 s
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
250 < V 500: 20 s
500 < V 1750: 30 s
V > 1750: 60 s
One flame application
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 4 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors
shall not burn with a flame.
No electrical measurements are required.
Document Number: 28116
Revision: 23-Feb-11
For technical questions, contact: RFI@vishay.com
www.vishay.com
395
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
BFC233818314
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818325
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818337
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.56 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818523
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.047 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818524
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.056 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818525
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818526
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.082 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818537
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.56 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818632
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.22 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818636
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.47 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818637
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.56 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
BFC233818818
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明