BAT54C-G3-08 [VISHAY]
Rectifier Diode, Schottky, 2 Element, 0.2A, 30V V(RRM), Silicon, GREEN PACKAGE-3;型号: | BAT54C-G3-08 |
厂家: | VISHAY |
描述: | Rectifier Diode, Schottky, 2 Element, 0.2A, 30V V(RRM), Silicon, GREEN PACKAGE-3 PC 光电二极管 |
文件: | 总4页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BAT54-G, BAT54A-G, BAT54C-G, BAT54S-G
www.vishay.com
Vishay Semiconductors
Small Signal Schottky Diodes, Single and Dual
FEATURES
• These diodes feature very low turn-on voltage
and fast switching
• These devices are protected by a PN junction
guardring against excessive voltage, such as
electrostatic discharges
• AEC-Q101 qualified
• Base P/N-G3 - green, commercial grade
BAT54-G
BAT54A-G
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
3
3
Top View
MECHANICAL DATA
1
2
1
2
Case: SOT-23
Weight: approx. 8.1 mg
BAT54C-G
BAT54S-G
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
3
3
Top View
1
2
1
2
PARTS TABLE
PART
ORDERING CODE
INTERNAL CONSTRUCTION TYPE MARKING
REMARKS
BAT54-G
BAT54-G3-08 or BAT54-G3-18
BAT54A-G3-08 or BAT54A-G3-18
BAT54C-G3-08 or BAT54C-G3-18
BAT54S-G3-08 or BAT54S-G3-18
Single diode
L8
BAT54A-G
BAT54C-G
BAT54S-G
Dual diodes common anode
Dual diodes common cathode
Dual diodes serial
L46
L47
L48
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VRRM
IF
VALUE
UNIT
V
Repetitive peak reverse voltage
Forward continuous current (1)
Repetitive peak forward current (1)
Surge forward current (1)
Power dissipation
30
200
300
600
230
mA
mA
mA
mW
IFRM
tp < 1 s
IFSM
Ptot
Note
(1)
Device on fiberglass substrate, see layout on next page.
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air (1)
TEST CONDITION
SYMBOL
RthJA
Tj
VALUE
UNIT
K/W
°C
430
Junction temperature
125
Storage temperature range
Operating temperature range
Tstg
- 65 to + 150
- 55 to + 125
°C
Top
°C
Note
(1)
Device on fiberglass substrate, see layout on next page.
Rev. 1.2, 25-Feb-13
Document Number: 83344
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAT54-G, BAT54A-G, BAT54C-G, BAT54S-G
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Reverse breakdown voltage
I
R = 100 μA (pulsed)
V(BR)
30
V
Pulse test tp < 300 μs, < 2 % at
Leakage current
Forward voltage
IR
2
μA
VR = 25 V
IF = 0.1 mA, tp < 300 μs, < 2 %
IF = 1 mA, tp < 300 μs, < 2 %
IF = 10 mA, tp < 300 μs, < 2 %
IF = 30 mA, tp < 300 μs, < 2 %
IF = 100 mA, tp < 300 μs, < 2 %
VF
VF
VF
VF
VF
CD
240
320
400
500
800
10
mV
mV
mV
mV
mV
pF
Diode capacitance
V
R = 1 V, f = 1 MHz
IF = 10 mA to IR = 10 mA,
Reverse recovery time
trr
5
ns
i
R = 1 mA, RL = 100
LAYOUT FOR RthJA TEST
Thickness:
Fiberglass 1.5 mm (0.059 inches)
Copper leads 0.3 mm (0.012 inches)
7.5 (0.3)
3 (0.12)
1 (0.4)
2 (0.8)
1 (0.4)
12 (0.47)
0.8 (0.03)
2 (0.8)
15 (0.59)
5 (0.2)
1.5 (0.06)
5.1 (0.2)
17451
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
14
1000
12
T = 125 °C
j
100
10
10
- 40 °C
8
6
4
2
1
25 °C
0.1
0.01
0
0
4
8
12
16
20
24
28
0.6
1.2 1.4
0
0.2 0.4
0.8
1
18868
VR - Reverse Voltage (V)
18867
VF - Forward Voltage (V)
Fig. 1 - Typical Forward Voltage Forward Current vs.
Fig. 2 - Diode Capacitance vs. Reverse Voltage VR
Various Temperatures
Rev. 1.2, 25-Feb-13
Document Number: 83344
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAT54-G, BAT54A-G, BAT54C-G, BAT54S-G
www.vishay.com
Vishay Semiconductors
1000
100
10
T = 125 °C
j
100 °C
75 °C
50 °C
1
25 °C
0.1
0.01
0
5
10
15
20
25
30
VR - Reverse Voltage (V)
18869
Fig. 3 - Typical Variation of Reverse Current
vs. Various Temperatures
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
3.1 (0.122)
2.8 (0.110)
0.550 ref. (0.022 ref.)
0.5 (0.020)
0.3 (0.012)
0.45 (0.018)
0.35 (0.014)
0.45 (0.018)
0.35 (0.014)
0° to 8°
2.6 (0.102)
2.35 (0.093)
0.45 (0.018)
0.35 (0.014)
Foot print recommendation:
0.7 (0.028)
1 (0.039)
0.9 (0.035)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Rev. 1.2, 25-Feb-13
Document Number: 83344
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明