AMW05S220R0J [VISHAY]
Fixed Resistor, Wire Wound, 5W, 220ohm, 5% +/-Tol, -100,150ppm/Cel, 8732,;型号: | AMW05S220R0J |
厂家: | VISHAY |
描述: | Fixed Resistor, Wire Wound, 5W, 220ohm, 5% +/-Tol, -100,150ppm/Cel, 8732, |
文件: | 总6页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
End-of-Life Vishay Phoenix Product
AMWS
Vishay Phoenix
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
FEATURES
• High power dissipation in small volume
• Completely welded construction
• Fire proof inorganic construction
• Formed leads available on request
• Film resistors version available on request
• Long leads available
For closest Vishay Dale equivalent, please contact: ww2aresistors@vishay.com
Note:
• There may be slight differences between the Vishay Phoenix and the Vishay Dale crosses
TECHNOLOGY
The resistor element is a resistive wire, which is wound, on ceramic rod.
Tinned copper leads are connected to the caps by welding. The resistor body are housed in a rectangular ceramic case with a
special inorganic potting which is non-flammable, will not melt even at high overloads and is resistant to most commonly used
cleaning solvents and moisture.
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
E-SERIES
Decade
Values
RESISTANCE RANGE (1)
TOLERANCE (2)
%
MODEL
P40 °C
Ω
W
AMW03S
AMW05S
AMW07S
AMW10S
3
5
0.10 - 2.4K
0.10 - 4.7K
0.10 - 6.8K
0.10 - 10K
5
24
7
10
Notes:
(1) Special resistance values available upon request
(2) Other tolerances available upon request
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
AMWS RESISTOR CHARACTERISTICS
Limiting Voltage
Insulation Voltage
V
V
P x R
> 2000
R < 10 Ω: 0 to + 600;
R ≥ 10 Ω: - 100 to + 150;
Temperature Coefficient (3)
ppm/°C
Operating Temperature
Short Time Overload
°C
-
- 55 to + 275
10 x rated power for 5 s
Note:
(3) Temperature Coefficient of 30, 50 or 90 ppm/ºC available upon request
www.vishay.com
1
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30250
Revision: 19-Feb-08
End-of-Life Vishay Phoenix Product
AMWS
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
DIMENSIONS in millimeters (inches)
FLAT VERSION
L
A
L
Ø d
B
H
STAND-OFF VERSION
L
A
L
Ø d
B
H
E
TYPE
A
H
B
E
Ø d
L (1)
17.5 1.5
(0.689 0.06)
6.4 0.8
(0.252 0.031)
6.4 0.8
(0.252 0.031)
8.0 1.0
(0.315 0.04)
AMW03S
22.2 1.5
(0.874 0.06)
8.0 1.0
(0.315 0.04)
8.0 1.0
(0.315 0.04)
9.5 1.0
(0.374 0.04)
AMW05S
AMW07S
AMW10S
0.8 0.03
(0.031 0.001)
28.0
(1.10 0.12)
3
22.2 1.5
(0.874 0.06)
9.5 1.0
(0.374 0.04)
9.5 1.0
(0.374 0.04)
11 1.0
(0.433 0.04)
35 1.5
(1.378 0.06)
9.5 1.0
(0.374 0.04)
9.5 1.0
(0.374 0.04)
11.9 1.0
(0.469 0.04)
ELECTRICAL CHARACTERISTICS
The power that the resistor can dissipate depends on the operating temperature.
100
3 W 5 W 7 W 10 W
0
0
25 40
100
150
200
250
275
Tamb (°C)
DERATING
Maximum dissipation (Pmax.) in percentage of rated power as a function of ambient temperature (Tamb
)
Notes:
Application information available on request:
• Pulse load behavior
• Hot spot and solder spot curves
Document Number: 30250
Revision: 19-Feb-08
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
2
End-of-Life Vishay Phoenix Product
AMWS
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
MARKING
The resistor is marked with the resistor type designation,
nominal resistance value, tolerance, rated power and the
production date (week and year), in red on the resistor body.
Example:
PHX
5K1
AMW07S
502
7 W
5 %
Example: AMW07S - 5.1 kΩ - 5 % - week 02 - year 2005
ORDERING INFORMATION
LEAD Ø
in millimeters
(inches)
ORDERING
QUANTITY
(pieces)
PRODUCT
AMW03S
AMW05S
AMW07S
AMW10S
TOLERANCE
VERSION
PACKAGING
CODE
2306 270 13xxx
2306 270 23xxx
2306 271 13xxx
2306 271 23xxx
2306 272 13xxx
2306 272 23xxx
2306 273 13xxx
2306 273 23xxx
FLAT
STAND-OFF
FLAT
360
300
STAND-OFF
FLAT
0.80
(0.031)
5 %
BOX
250
STAND-OFF
FLAT
STAND-OFF
Last Digit of Ordering Code
The resistors have 12 digit ordering code starting with 2306.
The next 5 digits indicate the resistor type and packaging,
see table ORDERING INFORMATION.
RESISTANCE
DECADE
LAST DIGIT
0.1 Ω - 0.91 Ω
1 Ω - 9.1 Ω
7
8
9
1
2
3
4
The last 3 digits indicate the resistance value:
- The first 2 digits of these last 3 indicate the actual
resistance value
- The last digit indicates the resistance decade in
accordance with table “Last Digit of Ordering Code”
10 Ω - 91 Ω
100 Ω - 910 Ω
1 kΩ - 9.1 kΩ
10 kΩ - 91 kΩ
100 kΩ - 910 kΩ
Example:
AMW03S, 100 Ω, 5 %, flat case, box of 250 pieces is
2306 270 13101
www.vishay.com
3
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30250
Revision: 19-Feb-08
End-of-Life Vishay Phoenix Product
AMWS
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
NAFTA ORDERING INFORMATION
LEAD Ø
in millimeters
(inches)
NAFTA
ORDERING CODE
QUANTITY
(pieces)
PRODUCT
TOLERANCE
VERSION
PACKAGING
AMW03SxxxxxJ
AMW03SxxxxxJSO
AMW05SxxxxxJ
FLAT
STAND-OFF
FLAT
AMW03S
AMW05S
AMW07S
AMW10S
AMW05SxxxxxJSO
AMW07SxxxxxJ
STAND-OFF
FLAT
0.80
(0.031)
5 %
BOX
250
AMW07SxxxxxJSO
AMW10SxxxxxJ
STAND-OFF
FLAT
AMW10SxxxxxJSO
STAND-OFF
Examples of the Ohmic Value
The ohmic value in the NAFTA ordering code (see table
NAFTA ORDERING INFORMATION) is represented by the
“xxxxx“ in the middle of the above ordering code. The table
“Examples of the Ohmic Value” gives some examples on
how to use these 5 digits.
Value
1 Ω
5 DIGITS
1R000
10R00
100R0
1K000
10K00
100K0
10 Ω
100 Ω
1 kΩ
Example:
AMW03S, 100 Ω,
5 %, flat case, box of 250 pieces is
10 kΩ
100 kΩ
AMW03S100R0J
PACKAGING in millimeters (inches)
P
N
M
QUANTITY
(pieces)
PRODUCT
VERSION
P
M
N
FLAT
STAND-OFF
FLAT
227 (8.94)
227 (8.94)
227 (8.94)
227 (8.94)
256 (10.08)
256 (10.08)
256 (10.08)
256 (10.08)
92 (3.63)
92 (3.63)
92 (3.63)
92 (3.63)
92 (3.63)
92 (3.63)
105 (4.14)
105 (4.14)
100 (3.94)
-
AMW03S
100 (3.94)
AMW05S
AMW07S
AMW10S
STAND-OFF
FLAT
-
250
105 (4.14)
STAND-OFF
FLAT
-
105 (4.14)
-
STAND-OFF
Document Number: 30250
Revision: 19-Feb-08
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
4
End-of-Life Vishay Phoenix Product
AMWS
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
TESTS AND REQUIREMENTS
Essentially all tests and requirements present in table below, follow the schedule of IEC standard publication 60115-1, 60015-4,
60068.
PERFORMANCE
IEC
IEC
60068
60115-1
TEST
PROCEDURE
REQUIREMENTS
TEST
METHOD
CLAUSE
500 VDC during 1 min;
V-block method
4.6.1.1
4.7
-
-
Insulation resistance
Rins min. 100 MΩ
Voltage proof on
insulation
1000 VRMS during 1 min;
V-block method
No breakdown or flashover
Between
- 55 °C at + 275 °C
R < 10 Ω
Temperature
coefficient
4.8
-
0 to + 600 ppm/°C;
+ 150 to - 100 ppm/°C
R ≥ 10 Ω
4.13
-
Short time overload
Dissipation 10 x Pn; 5 s
ΔR/Rmax. 2 % + 0.05 Ω
Robustness of
terminations:
4.16
21(U)
4.16.2
4.16.3
21(Ua1)
21(Ub)
Tensile all samples
Load 10 N; 10 s
Load 5 N; 4 x 90°
No visible damage
ΔR/Rmax. 2 % + 0.05 Ω
Bending half number
of samples
Tension other half
of samples
3 x 360° in
opposite directions
4.16.4
4.17
21(Uc)
20(Ta)
16 h at 155 °C;
leads immersed in flux 600,
leads immersed 2 mm
for 2 0.5 s
Good tinning;
no damage
Solderability
(after aging)
ΔR/Rmax. 0.5 % + 0.05 Ω
in a solder bath at 235 5 °C
Resistance to
soldering heat
Thermal shock: 3 s,
350 °C; 6 mm from body
4.18
4.19
20(Tb)
14(Na)
ΔR/Rmax. 4 % + 0.05 Ω
30 min at - 55 °C and
30 min + 275 °C;
5 cycles
Rapid change of
temperature
No visual damage
ΔR/Rmax. 5 % + 0.05 Ω
4.23
Climatic sequence:
Dry heat
4.23.2
2(Ba)
30(Db)
1(Aa)
16 h, 275 °C
Damp heat
(accelerated)
1st cycle
24 h, 25 °C to 55 °C;
4.23.3
4.23.4
4.23.6
90 to 100 % RH
ΔR/Rmax. 3 % + 0.05 Ω
Cold
2 h, - 65 °C
Damp heat
(accelerated)
6 days; 55 °C;
30 (Db)
90 to 98 % RH
remaining cycles
Damp heat
(steady state)
56 days; 40 °C; 90 to 95 % RH;
4.24
3 (Ca)
-
ΔR/Rmax. 5 % + 0.05 Ω
loaded with 0.01 Pn
1000 h load
Endurance
40 °C
with Pn or Vmax.
1.5 h ON and
0.5 h OFF
;
No damage
ΔR/Rmax. 5 % + 0.1 Ω
4.25.1
www.vishay.com
5
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30250
Revision: 19-Feb-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
AMX-P2X2P-6011-001
Rectangular Power Connector, 4 Contact(s), Male, Press Fit Terminal, ROHS COMPLIANT
AMPHENOL
©2020 ICPDF网 联系我们和版权申明