8ETX06FP [VISHAY]
Hyperfast Rectifier, 8 A FRED PtTM; 超快整流器, 8的FRED PTTM型号: | 8ETX06FP |
厂家: | VISHAY |
描述: | Hyperfast Rectifier, 8 A FRED PtTM |
文件: | 总7页 (文件大小:125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
8ETX06/8ETX06FP
Vishay High Power Products
Hyperfast Rectifier,
8 A FRED PtTM
FEATURES
8ETX06
8ETX06FP
• Hyperfast recovery time
• Low forward voltage drop
• Low leakage current
• 175 °C operating junction temperature
• Fully isolated package (VINS = 2500 VRMS
• UL E78996 approved
)
Base
cathode
2
• Designed and qualified for industrial level
DESCRIPTION/APPLICATIONS
State of the art hyperfast recovery rectifiers designed with
optimized performance of forward voltage drop, hyperfast
recover time, and soft recovery.
The planar structure and the platinum doped life time control
guarantee the best overall performance, ruggedness and
reliability characteristics.
1
1
Cathode
3
3
Anode
Cathode
Anode
TO-220AC
TO-220 FULL-PAK
These devices are intended for use in PFC boost stage in the
AC-DC section of SMPS, inverters or as freewheeling
diodes.
Their extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
PRODUCT SUMMARY
trr (typical)
15 ns
8 A
IF(AV)
VR
600 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Repetitive peak reverse voltage
VRRM
600
V
TC = 143 °C
Average rectified forward current
FULL-PAK
IF(AV)
8
TC = 106 °C
A
Non-repetitive peak surge current
Repetitive peak forward current
IFSM
IFM
TJ = 25 °C
110
18
Operating junction and storage temperatures
TJ, TStg
- 65 to 175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
Breakdown voltage,
blocking voltage
VBR
VR
,
IR = 100 µA
IF = 8 A
600
-
-
V
-
-
-
-
-
-
2.3
1.4
0.3
35
3.0
1.7
50
500
-
Forward voltage
VF
IR
IF = 8 A, TJ = 150 °C
VR = VR rated
Reverse leakage current
µA
TJ = 150 °C, VR = VR rated
VR = 600 V
Junction capacitance
Series inductance
CT
LS
17
pF
nH
Measured lead to lead 5 mm from package body
8.0
-
Document Number: 93030
Revision: 24-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
1
8ETX06/8ETX06FP
Hyperfast Rectifier,
8 A FRED PtTM
Vishay High Power Products
DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V
IF = 8 A, dIF/dt = 100 A/µs, VR = 30 V
TJ = 25 °C
MIN.
TYP.
MAX.
UNITS
-
-
-
-
-
-
-
-
-
-
-
15
19
24
-
16
Reverse recovery time
trr
ns
17
TJ = 125 °C
40
-
IF = 8 A
TJ = 25 °C
2.3
4.5
20
-
Peak recovery current
IRRM
dIF/dt = 200 A/µs
TJ = 125 °C
A
-
V
R = 390 V
TJ = 25 °C
-
Reverse recovery charge
Qrr
nC
TJ = 125 °C
100
31
-
Reverse recovery time
Peak recovery current
Reverse recovery charge
trr
-
ns
A
IF = 8 A
IRRM
Qrr
TJ = 125 °C
dIF/dt = 600 A/µs
12
-
V
R = 390 V
195
-
nC
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDTIONS
MIN.
TYP.
MAX.
UNITS
Maximum junction and storage
temperature range
TJ, TStg
- 65
-
175
°C
per leg
-
-
1.4
3.4
2
Thermal resistance,
junction to case
RthJC
(FULL-PAK) per leg
4.3
Thermal resistance,
junction to ambient per leg
°C/W
RthJA
RthCS
Typical socket mount
-
-
-
70
-
Thermal resistance,
case to heatsink
Mounting surface, flat, smooth
and greased
0.5
-
-
2.0
-
-
g
Weight
0.07
oz.
6.0
(5.0)
12
(10)
kgf · cm
(lbf · in)
Mounting torque
Marking device
-
Case style TO-220AC
8ETX06
8ETX06FP
Case style TO-220 FULL-PAK
www.vishay.com
2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93030
Revision: 24-Jun-08
8ETX06/8ETX06FP
Hyperfast Rectifier,
8 A FRED PtTM
Vishay High Power Products
1000
100
10
1
TJ = 175 °C
100
10
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
1
0.1
TJ = 175 °C
TJ = 150 °C
TJ = 25 °C
TJ = 25 °C
0.01
0.001
0.0001
0.1
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
0
100
200
300
400
500
600
VF - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
1000
100
TJ = 25 °C
10
0
100
200
300
400
500
600
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
PDM
t1
D = 0.50
D = 0.20
D = 0.10
0.1
0.01
t2
D = 0.05
D = 0.02
D = 0.01
Notes:
1. Duty factor D = t1/t2
Single pulse
(thermal resistance)
.
2. Peak TJ = PDM x ZthJC + TC
.
0.00001
0.0001
0.001
0.01
0.1
1
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93030
Revision: 24-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
3
8ETX06/8ETX06FP
Hyperfast Rectifier,
8 A FRED PtTM
Vishay High Power Products
10
1
PDM
t1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.1
t2
Single pulse
(thermal resistance)
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
.
.
0.01
0.00001
0.0001
0.001
0.01
0.1
1
100
10
t1 - Rectangular Pulse Duration (s)
Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK)
180
170
160
150
140
130
120
180
160
140
DC
DC
120
Square wave (D = 0.50)
Rated VR applied
Square wave (D = 0.50)
Rated VR applied
100
80
60
See note (1)
See note (1)
40
0
2
4
6
8
10
12
0
2
4
6
8
10
12
IF(AV) (A) Average Forward Current
IF(AV) - Average Forward Current (A)
Fig. 6 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 7 - Maximum Allowable Case Temperature vs.
Average Forward Current (FULL-PAK)
20
18
16
14
12
10
8
RMS limit
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
6
4
DC
4
2
0
0
2
6
8
10
12
14
IF(AV) - Average Forward Current (A)
Fig. 8 - Forward Power Loss Characteristics
Note
(1)
Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 8);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93030
Revision: 24-Jun-08
8ETX06/8ETX06FP
Hyperfast Rectifier,
8 A FRED PtTM
Vishay High Power Products
50
40
30
20
10
300
250
200
150
100
50
VR = 390 V
TJ = 125 °C
TJ = 25 °C
IF = 16 A
IF = 8 A
IF = 8 A
IF = 16 A
VR = 390 V
TJ = 125 °C
TJ = 25 °C
IF = 16 A
IF = 16 A
IF = 8 A
IF = 8 A
0
100
100
1000
1000
dIF/dt (A/µs)
dIF/dt (A/µs)
Fig. 10 - Typical Stored Charge vs. dIF/dt
Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt
V
R = 200 V
0.01 Ω
L = 70 µH
D.U.T.
D
dIF/dt
adjust
IRFP250
G
S
Fig. 11 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
(4)
Qrr
(2)
IRRM
0.5 IRRM
(5)
dI(rec)M/dt
0.75 IRRM
dIF/dt
(1)
(4) Qrr - area under curve defined by trr
(1) dIF/dt - rate of change of current
through zero crossing
and IRRM
trr x IRRM
(2) IRRM - peak reverse recovery current
Qrr
=
2
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 12 - Reverse Recovery Waveform and Definitions
Document Number: 93030
Revision: 24-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
5
8ETX06/8ETX06FP
Hyperfast Rectifier,
8 A FRED PtTM
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
8
E
T
X
06
FP
-
1
2
3
4
5
6
7
1
2
3
4
5
-
-
-
-
-
Current rating (8 = 8 A)
E = Single diode
T = TO-220, D2PAK
X = Hyperfast recovery
Voltage rating (06 = 600 V)
6
-
None = TO-220AC
FP = TO-220 FULL-PAK
7
-
None = Standard production
PbF = Lead (Pb)-free
Tube standard pack quantity: 50 pieces
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95039
http://www.vishay.com/doc?95045
Part marking information
www.vishay.com
6
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93030
Revision: 24-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明