6N138-X009T [VISHAY]

OPTOCOUPL DC-IN 1CH DARL W/BASE DC-OUT 8PDIP SMD - Tape and Reel;


型号：	6N138-X009T
厂家：	VISHAY
描述：	OPTOCOUPL DC-IN 1CH DARL W/BASE DC-OUT 8PDIP SMD - Tape and Reel 光电二极管光电二极管输出元件
文件：	总6页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

6N138/ 6N139

Vishay Semiconductors

High Speed Optocoupler, 100 kBd, Low Input Current,

Photodiode Darlington Output

Features

• High Current Transfer Ratio, 300 %

• Low Input Current, 0.5 mA

• High Output Current, 60 mA

• Isolation Test Voltage, 5300 V

RMS

• TTL Compatible Output, V = 0.1 V

GND

• High Common Mode Rejection, 500 V/µs

• Adjustable Bandwidth-Access to Base

• Standard Molded Dip Plastic Package

• Lead-free component

i179082

Pb-free

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

Photo darlington operation is achieved by tying the

and V terminals together. Access to the base

terminal allows adjustment to the gain bandwidth.

The 6N138 is ideal for TTL applications since the

300 % minimum current transfer ratio with an LED

current of 1.6 mA enables operation with one unit

load-in and one unit load-out with a 2.2 kΩ pull-up

resistor.

Agency Approvals

• UL1577, File No. E52744 System Code H or J,

Double Protection

• DIN EN 60747-5-2 (VDE0884)

DIN EN 60747-5-5 pending

Available with Option 1

The 6N139 is best suited for low power logic applica-

tions involving CMOS and low power TTL. A 400 %

current transfer ratio with only 0.5 mA of LED current

is guaranteed from 0 °C to 70 °C

Applications

Logic Ground Isolation-TTL/TTL, TTL/CMOS, CMOS/

CMOS, CMOS/TTL

EIA RS 232 Line Receiver

Low Input Current Line Receiver-Long Lines,Party

Lines

Caution: Due to the small geometries of this device, it should be

handled with Electrostatic Discharge (ESD) precautions. Proper

grounding would prevent damage further and/or degradation which

may be induced by ESD.

Telephone Ring Detector

Order Information

117 VAC Line Voltage Status Indication-Low Input

Power Dissipation

Low Power Systems-Ground Isolation

Part

Remarks

6N138

6N139

CTR > 300 %, DIP-8

CTR > 500 %, DIP-8

6N138-X007

6N138-X009

6N139-X007

6N139-X009

CTR > 300 %, SMD-8 (option 7)

CTR > 300 %, SMD-8 (option 9)

CTR > 500 %, SMD-8 (option 7)

CTR > 500 %, SMD-8 (option 9)

Description

High common mode transient immunity and very high

current ratio together with 5300 V

achieved by coupling and LED with an integrated high

gain photo detector in an eight pin dual-in-line pack-

age. Separate pins for the photo diode and output

stage enable TTL compatible saturation voltages with

high speed operation.

insulation are

RMS

For additional information on the available options refer to

Option Information.

Document Number 83605

Rev. 1.5, 26-Oct-04

www.vishay.com

6N138/ 6N139

Vishay Semiconductors

Absolute Maximum Ratings

T_amb= 25 °C, unless otherwise specified

Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is

not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

Maximum Rating for extended periods of the time can adversely affect reliability.

Input

Parameter

Test condition

Symbol

V_R

Value

5.0

Unit

Reverse voltage

Forward current

I_F

Average input current

I_F(AVG)

P_diss

Input power dissipation ^{1), 3)}

Output

Parameter

Test condition

pin 8-5, pin 6-5

Part

Symbol

Value

Unit

Supply and output voltage

6N138

6N139

V_CC, V_O

- 0.5 to 7.0

pin8-5, pin 6-5

pin 5-7

_CC, V_O

- 0.5 to 18

Emitter base reverse voltage

Peak input current

0.5

50 % duty cycle - 1.0 ms pulse

width

Peak transient input current

Output current

t_p≤ 1.0 µs, 300 pps

1.0

pin 6

I_O

Output power dissipation ^{2), 4)}

P_diss

100

Coupler

Parameter

Test condition

Symbol

Value

5300

Unit

Isolation test voltage

V_ISO

R_IO

V_RMS

Ω

≥ 10¹²

≥ 10¹¹

Isolation resistance

V_IO= 500 V, T_amb= 25 ° C

_IO= 500 V, T_amb= 100 ° C

R_IO

Ω

Storage temperature

T_stg

T_amb

T_sld

- 55 to + 125

- 55 to + 100

260

°C

Operating temperature

Lead soldering temperature

t = 10 s

¹⁾Derate linearly above 50 °C free-air temperature at a rate of 0.4 mA/°C

²⁾Derate linearly above 50 °C free-air temperature at a rate of 0.7 mW/°C

³⁾Derate linearly above 25 °C free-air temperature at a rate of 0.7 mA/°C

⁴⁾Derate linearly above 25 °C free-air temperature at a rate of 2.0 mW/°C

www.vishay.com

Document Number 83605

Rev. 1.5, 26-Oct-04

6N138/ 6N139

Vishay Semiconductors

Electrical Characteristics

T_amb= 25 °C, unless otherwise specified

Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

Input

Parameter

Test condition

I_F= 1.6 mA

_R= 10 µA

Symbol

V_F

Min

5.0

Typ.

1.4

Max

1.7

Unit

Input forward voltage

Input reverse breakdown

voltage

BV_R

Temperature coefficient of

forward voltage

I_F= 1.6 mA

- 1.8

mV/°C

Output

Parameter

Logic low, output voltage ⁶⁾

Test condition

Part

Symbol

Min

Typ.

0.1

Max

Unit

I_F= 1.6 mA, I_O= 4.8 mA,

V_CC= 4.5 V

6N138

V_OL

0.4

I_F= 1.6 mA, I_O= 8.0 mA,

V_CC= 4.5 V

6N139

0.1

I_F= 5.0 mA, I_O= 15 mA,

V_CC= 4.5 V

0.15

0.25

I_F= 12 mA, I_O= 24 mA,

V_CC= 4.5 V

Logic high, output current⁶⁾

I_F= 0 mA, V_CC= V_CC= 7.0 V

I_F= 0 mA, V_CC= V_CC= 18 V

6N138

6N139

I_OH

0.1

0.05

0.2

250

100

1.5

µA

Logic low supply current ⁶⁾

Logic high supply current ⁶⁾

⁶⁾Pin 7 open

I_F= 1.6 mA, V_O= OPEN,

V_CC= 18 V

I_CCL

I_F= 0 mA, V_O= OPEN,

V_CC= 18 V

I_CCH

0.001

µA

Coupler

Parameter

Test condition

Symbol

C_IN

Min

Typ.

Max

Unit

Input capacitance

f = 1.0 MHz, V_F= 0

Input output insulation leakage 45 % relative humidity,

1.0

µA

current⁷⁾

_amb= 25 °C, t = 5.0 s,

_IO= 3000 VDC

Resistance (input output) ⁷⁾

Capacitance (input-output) ⁷⁾

10¹²

0.6

V_IO= 500 VDC

f = 1.0 MHz

R_IO

C_IO

Ω

⁷⁾Device considered a two-terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7, and 8 shorted together.

Document Number 83605

Rev. 1.5, 26-Oct-04

www.vishay.com

6N138/ 6N139

Vishay Semiconductors

Current Transfer Ratio

Parameter

Current Transfer Ratio^{5), 6)}

Test condition

Part

Symbol

CTR

Min

300

Typ.

Max

Unit

I_F= 1.6 mA, V_O= 0.4 V,

V_CC= 4.5 V

6N138

1600

Current Transfer Ratio

I_F= 0.5 mA, V_O= 0.4 V,

V_CC= 4.5 V

6N139

CTR

400

500

1600

2000

I_F= 1.6 mA, V_O= 0.4 V,

V_CC= 4.5 V

⁵⁾DC current transfer ratio is defined as the ratio of output collector current, I_O, to the forward LED input current, I_Ftimes 100 %.

⁶⁾Pin 7 open

Switching Characteristics

Parameter

Test condition

Part

Symbol

t_PHL

Min

Typ.

2.0

Max

Unit

Propagation delay time to logic I_F= 1.6 mA, R_L= 2.2 kΩ

6N138

µs

low at output

Propagation delay time to logic I_F= 0.5 mA, R_L= 4.7 kΩ

low at output ^{6) , 8)}

6N139

t_PHL

6.0

µs

I_F= 12 mA, R_L= 270 Ω

6N139

6N138

t_PHL

t_PLH

0.6

2.0

1.0

µs

Propagation delay time to logic I_F= 1.6 mA, R_L= 2.2 kΩ

high at output

I_F= 0.5 mA, R_L= 4.7 kΩ

6N139

t_PLH

4.0

1.5

µs

Propagation delay time to logic I_F= 12 mA, R_L= 270 Ω

7.0

high at output ^{6) , 8)}

⁶⁾Pin 7 open

⁸⁾Using a resistor between pin 5 and 7 will decrease gain and delay time.

Common Mode Transient Immunity

Parameter

Test condition

I_F= 0 mA, R_L= 2.2 kΩ, R_CC= 0,

|V_CM| = 10 V_P-P

Symbol

| CM_H

Min

Typ.

500

Max

Unit

Common mode transient

immunity, logic high level output

V/µs

9) , 10)

Common mode transient

I_F= 1.6 mA, R_L= 2.2 kΩ,

| CM_L|

- 500

V/µs

immunity, logic low level output

9) , 10)

R_CC= 0, |V_CM| = 10 V_P-P

⁹⁾Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common

mode pulse, V_CM, to assure that the output will remain in a logic high state (i.e. V_O> 2.0 V) common mode transient immunity in logic low

level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, V_CMto assure that the output

will remain in a logic low state (i.e. V_O< 0.8 V).

¹⁰⁾In applications where dv/dt may exceed 50,000 V/µs (such as state discharge) a series resistor, R_CCshould be included to protect I_C

from destructively high surge currents.The recommend value is R_CC≅[(1 V)/(0.15 I_F(mA)] KΩ

www.vishay.com

Document Number 83605

Rev. 1.5, 26-Oct-04

6N138/ 6N139

Vishay Semiconductors

Package Dimensions in Inches (mm)

pin one ID

.255 (6.48)

.268 (6.81)

ISO Method A

.379 (9.63)

.390 (9.91)

.030 (0.76)

.045 (1.14)

.300 (7.62)

.031 (0.79)

typ.

4° typ.

.130 (3.30)

.150 (3.81)

.230(5.84)

.250(6.35)

.050 (1.27)

10°

.110 (2.79)

.130 (3.30)

.020 (.51 )

.035 (.89 )

3°–9°

.008 (.20)

.012 (.30)

.018 (.46)

.022 (.56)

.100 (2.54) typ.

i178006

Option 7

Option 9

.300 (7.62)

TYP.

.375 (9.53)

.395 (10.03)

.300 (7.62)

ref.

.028 (0.7)

MIN.

.180 (4.6)

.160 (4.1)

.0040 (.102)

.0098 (.249)

.012 (.30) typ.

.315 (8.0)

MIN.

.020 (.51)

.040 (1.02)

.331 (8.4)

MIN.

15° max.

18494

.315 (8.00)

min.

.406 (10.3)

MAX.

Document Number 83605

Rev. 1.5, 26-Oct-04

www.vishay.com

6N138/ 6N139

Vishay Semiconductors

Ozone Depleting Substances Policy Statement

It is the policy of Vishay Semiconductor GmbH to

1. Meet all present and future national and international statutory requirements.

2. Regularly and continuously improve the performance of our products, processes, distribution and

operatingsystems with respect to their impact on the health and safety of our employees and the public, as

well as their impact on the environment.

It is particular concern to control or eliminate releases of those substances into the atmosphere which are

known as ozone depleting substances (ODSs).

The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs

and forbid their use within the next ten years. Various national and international initiatives are pressing for an

earlier ban on these substances.

Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use

of ODSs listed in the following documents.

1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments

respectively

2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental

Protection Agency (EPA) in the USA

3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.

Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting

substances and do not contain such substances.

We reserve the right to make changes to improve technical design

and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each

customer application by the customer. Should the buyer use Vishay Semiconductors products for any

unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all

claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal

damage, injury or death associated with such unintended or unauthorized use.

Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423

www.vishay.com

Document Number 83605

Rev. 1.5, 26-Oct-04

6N138-X009T [VISHAY]

相关型号：

6N138-X017

6N138-X019

6N138.SD

6N138.SDL

6N138.W

6N138G

6N138M

6N138M

6N138M

6N138M(TA)-V

6N138M(TB)-V

6N138M-V