6KA24-E3/51 [VISHAY]
Trans Voltage Suppressor Diode,;型号: | 6KA24-E3/51 |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 二极管 |
文件: | 总4页 (文件大小:76K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
6KA24
Vishay General Semiconductor
www.vishay.com
PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high
reliability and automotive requirement
• Excellent clamping capability
• Low leakage current
• High surge capability
P600
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
VWM
24 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting,
especially for automotive load dump protection application.
VBR
26.7 V to 36.2 V
6000 W
2000 W
6.5 W
P
PPM (10 x 1000 μs)
P
PPM (10 μs/50 ms)
MECHANICAL DATA
PD
Case: P600, molded epoxy over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
IRSM
IFSM
90 A
400 A
TJ max.
Polarity
Package
185 °C
Uni-directional
P600
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
6000
UNIT
with 10/1000 μs waveform (1)
with 10μs/50 ms waveform (2)
Peak pulse power dissipation
PPPM
W
2000
Power dissipation on infinite heatsink at TL = 75 °C (fig. 3)
Maximum working stand-off voltage
PD
VWM
6.5
W
V
24
Peak forward surge current 8.3 ms single half sine-wave (3)
IFSM
400
A
Operating junction and storage temperature range
TJ, TSTG
-65 to +185
°C
Notes
(1)
(2)
(3)
Non-repetitive current pulse, per fig. 2, with a 10/1000μs waveform
Non-repetitive current pulse, per fig. 5, with a 10 μs/50 ms waveform
Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN VOLTAGE
TEST CURRENT
STAND-OFF VOLTAGE
V
BR AT IT
(V)
DEVICE TYPE
IT
VWM
(V)
(mA)
MIN.
MAX.
6KA24
26.7
32.6
100
24
Revision: 18-Apr-16
Document Number: 88309
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6KA24
Vishay General Semiconductor
www.vishay.com
ADDITIONAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
LIMIT
1.0
UNIT
TA = 25 °C
Maximum DC reverse leakage current
V
WM = 24 V
ID
μA
TA = 150 °C
50
TA = 150 °C min.
TA = 150 °C max.
TA = 25 °C
29.7
36.7
40
Reverse breakdown voltage
Maximum clamping voltage
100 mA
IPP = 90 A (1)
VBR
V
VC
VF
V
V
TA = 150 °C
45
Maximum instantaneous forward voltage 100 A (2)
1.8
Notes
(1)
Measured on 80 μs square pulse width
Measured on 300 μs square pulse width
(2)
ORDERING INFORMATION (Example)
PREFERRED P/N
6KA24HE3/54 (1)
6KA24HE3_A/C (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
2.710
54
C
800
800
13" diameter paper tape and reel
13" diameter paper tape and reel
2.710
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Non-Repetitive Pulse
Waveform shown in Fig. 2
TA = 25 °C
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPPM
IPP
2
10
10/1000 µs Waveform
as defined by R.E.A.
td
1
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
100 ms
1.0
3.0
4.0
0
2.0
t - Time (ms)
td - Pulse Width (s)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - 10/1000 μs Pulse Waveform
Revision: 18-Apr-16
Document Number: 88309
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6KA24
Vishay General Semiconductor
www.vishay.com
100
75
150
100
50
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Power Dissipation
tr = 10 µs
Peak Value
IPPM
Peak Power (Single Pulse)
TJ = Initial Temperature
IPP
2
Half Value -
IPPM
50
25
0
L = 0.375" (9.5 mm)
Lead Lengths
10 µs/50 ms Waveform
as defined by R.E.A.
td
0
50
150
200
0
100
0
50
100
150
175
t - Time (ms)
TL - Lead Temperature (°C)
Fig. 3 - Pulse Derating Curve
Fig. 5 - 10 μs/50 ms Pulse Waveform
400
TJ = TJ max.
8.3 ms Single Half Sine-Wave
350
300
250
200
150
100
1
5
10
50
100
Number of Cycles at 60 Hz
Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
P600
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
1.0 (25.4)
MIN.
0.048 (1.22)
DIA.
Revision: 18-Apr-16
Document Number: 88309
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号:
6KA24-E3/54
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24-E3/73
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/100
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/4E
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/4F
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/51
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/53
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/56
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/58
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
6KA24/60
Trans Voltage Suppressor Diode, 6000W, 24V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明