550D107X0010R2BE3 [VISHAY]

CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 100 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;


型号：	550D107X0010R2BE3
厂家：	VISHAY
描述：	CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 100 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电容器
文件：	总9页 (文件大小：130K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

550D

Vishay Sprague

www.vishay.com

Solid-Electrolyte TANTALEX Capacitors

for High Frequency Power Supplies

FEATURES

• Terminatons: Tin/lead (SnPb), 100 % tin (RoHS

compliant)

• Hermetically-sealed, axial-lead solid tantalum

capacitors

• Small size and long life

• Exceptional capacitance stability and excellent resistance

to severe environmental conditions

• The military equivalent is the CSR21 which is qualified to

MIL-C-39003/09

Note

* Pb containing terminations are not RoHS compliant, exemptions

may apply

APPLICATIONS

Designed for power supply filtering applications at above

100 kHz.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

At + 85 °C: Leakage current shall not exceed 10 times the

(to + 125 °C with voltage derating)

values listed in the Standard Ratings table

Capacitance Tolerance: At 120 Hz, + 25 °C

20 %, 10 % standard. 5 % available as special

At + 125 °C: Leakage shall not exceed 15 times the values

listed in the standard ratings tables

Dissipation Factor: At 120 Hz, + 25 °C.

Dissipation factor, as determined from the expression

2fC_R, shall not exceed the values listed in the standard

ratings tables

DC Leakage Current (DCL Max.):

At + 25 °C: Leakage current shall not exceed the values

listed in the Standard Ratings table

Life Test: Capacitors shall withstand rated DC voltage

applied at + 85 °C for 2000 h or derated DC voltage applied

at + 125 °C for 1000 h

Following the life test:

1. DCL shall not exceed 125 % of the initial requirements

2. Dissipation factor shall meet the initial requirement

3. Change in capacitance shall not exceed 5 %

ORDERING INFORMATION

550D

157

006

MODEL

CAPACITANCE

CAPACITANCE DCVOLTAGERATING

CASE

CODE

STYLE

NUMBER

PACKAGING

RoHS

COMPLIANT

TOLERANCE

AT + 85 °C

This is expressed in

picofarads. The first two

digits are the significant

figures. The third is the

number of zeros to

X0 = 20 %

X9 = 10 %

X5 = 5 % *

* Special order

This is expressed

See

2 =

T = Tape and

reel

E3 = 100 % tin

termination

in volts. To complete

Ratings

Insulated

sleeve

the three-digit block, and Case

B = Bulk (tray) (RoHS compliant)

zeros precede the

voltage rating.

Codes

table

pack

Blank = SnPb

termination

follow. Standard

capacitance ratings are

in accordance with EIA

preferred number series

wherever possible.

DIMENSIONS in inches [millimeters]

1.500 0.250

[38.10 ꢀ.35]

1.500 0.250

[38.10 ꢀ.35]

dia.

L₁

Positive lead

0.047 [1.19] max.

0.125 [3.18] max.

Solid tinned

nickel leads

max.

L₁

WITH INSULATING SLEEVE ⁽¹⁾

LEAD SIZE

NOMINAL DIA.

CASE

CODE

J (MAX.)

AWG NO.

0.289 0.01ꢀ [7.34 0.41]

0.351 0.01ꢀ [8.92 0.41]

0.ꢀ8ꢀ 0.031 [17.42 0.79]

0.78ꢀ 0.031 [19.9ꢀ 0.79]

0.822 [20.880]

0.922 [23.420]

0.025 [0.ꢀ4]

Note

(1)

When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

STANDARD RATINGS

MAX. DCL

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz (%)

MAX. ESR

AT + 25 °C

100 kHz ()

CAPACITANCE

(μF)

CASE CODE

PART NUMBER

6 V_DCAT + 85 °C, SURGE = 8 V; 4 V_DCAT + 125 °C, SURGE = 5 V

150

180

220

270

330

550D157(1)00ꢀR2

550D187(1)00ꢀR2

550D227(1)00ꢀS2

550D277(1)00ꢀS2

550D337(1)00ꢀS2

0.0ꢀ5

0.0ꢀ0

0.055

0.050

0.045

10 V_DCAT + 85 °C, SURGE = 13 V; 7 V_DCAT + 125 °C, SURGE = 9 V

550D82ꢀ(1)010R2

550D107(1)010R2

550D127(1)010R2

550D157(1)010S2

550D187(1)010S2

550D227(1)010S2

0.085

0.075

0.070

0.0ꢀ5

0.0ꢀ0

0.055

100

120

150

180

220

15 V_DCAT + 85 °C, SURGE = 20 V; 10 V_DCAT + 125 °C, SURGE = 12 V

5ꢀ

ꢀ8

100

120

150

550D5ꢀꢀ(1)015R2

550Dꢀ8ꢀ(1)015R2

550D82ꢀ(1)015S2

550D107(1)015S2

550D127(1)015S2

550D157(1)015S2

ꢀ

0.100

0.095

0.085

0.075

0.070

0.0ꢀ5

20 V_DCAT + 85 °C, SURGE = 26 V; 13 V_DCAT + 125 °C, SURGE = 16 V

5ꢀ

ꢀ8

100

550D27ꢀ(1)020R2

550D33ꢀ(1)020R2

550D39ꢀ(1)020R2

550D47ꢀ(1)020R2

550D5ꢀꢀ(1)020S2

550Dꢀ8ꢀ(1)020S2

550D82ꢀ(1)020S2

550D107(1)020S2

ꢀ

0.145

0.130

0.120

0.110

0.100

0.095

0.085

0.075

1ꢀ

35 V_DCAT + 85 °C, SURGE = 46 V; 23 V_DCAT + 125 °C, SURGE = 28 V

8.2

550D825(1)035R2

550D10ꢀ(1)035R2

550D12ꢀ(1)035R2

550D15ꢀ(1)035R2

550D18ꢀ(1)035R2

550D22ꢀ(1)035R2

550D27ꢀ(1)035S2

550D33ꢀ(1)035S2

550D39ꢀ(1)035S2

550D47ꢀ(1)035S2

ꢀ

1ꢀ

0.250

0.230

0.210

0.190

0.175

0.1ꢀ0

0.145

0.130

0.120

0.110

50 V_DCAT + 85 °C, SURGE = 65 V; 33 V_DCAT + 125 °C, SURGE = 40 V

5.ꢀ

ꢀ.8

8.2

550D5ꢀ5(1)050R2

550Dꢀ85(1)050R2

550D825(1)050R2

550D10ꢀ(1)050R2

550D12ꢀ(1)050R2

550D15ꢀ(1)050R2

550D18ꢀ(1)050R2

550D22ꢀ(1)050S2

ꢀ

0.300

0.275

0.250

0.230

0.210

0.190

0.175

0.1ꢀ0

Note

Part number definitions:

(1) Tolerance: For 10 % tolerance specify X9; for 20 % specify “X0”; for 5 % “X5” (special order)

•

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

TAPE AND REEL PACKAGING in inches (millimeters)

13.0 (330.2)

“A”

STANDARD REEL

TAPE SPACING

COMPONENT

1.126 to 3.07

(28.6 to 78.0)

SPACING

I. D. REEL HUB

1.374 to 3.626

(34.9 to 92.1)

0.047 [1.19] MAX.

OFF CENTER (1. a)

0.625 0.0062 DIA.

(15.88 1.575)

DIA.THRU HOLE

0.125 (3.18) MAX.

0.250 (6.35) (3. b)

0.750 (19.05)

0.031 (0.79) (3. f)

BOTH SIDES (3. f)

“A”

LABEL (4. a)

SECTION “A” - “A”

TYPE 550D UNITS WITH

INSULATING SLEEVE

COMPONENT

SPACING

LEAD SIZE

TAPE SPACING

CASE

CODE

UNITS

PER REEL

(MAX.)

AWG NO.

NOM. DIA.

0.289 0.01ꢀ

(7.34 0.41)

0.ꢀ8ꢀ 0.031

(17.42 0.79)

0.822

(20.88)

0.025

(0.ꢀ4)

0.400 0.015

(10.1ꢀ 0.38)

2.875 0.0ꢀ2

(73.03 1.57)

500

0.351 0.01ꢀ

(8.92 0.41)

0.78ꢀ 0.031

(19.9ꢀ 0.79)

0.922

(23.42)

0.025

(0.ꢀ4)

0.400 0.015

(10.1ꢀ 0.38)

2.875 0.0ꢀ2

(73.03 1.57)

STANDARD REEL PACKAGING INFORMATION

1. Component Leads

g. Staples shall not be used for splicing. Not more than

4 layers of tape shall be used in any splice area and no

tape shall be offset from another by more than 0.031"

[0.79 mm] non-cumulative. Tape splices shall overlap at

least ꢀ.0" [152.4 mm] for butt joints and at least 3.0"

[7ꢀ.2 mm] for lap joints and shall not be weaker than

unspliced tape. Universal splicing clips may also be used.

h. Quantity per reel shall be controlled so that tape

components and cover shall not extend beyond the

smallest dimension of the flange (either across flats or

diameter). Once the quantity per reel for each part

number has been established, future orders for that part

number shall be packaged in that quantity. When order or

release quantity is less than the established quantity, a

standard commercial pack is to be used.

a. Component leads shall not be bent beyond 0.047"

[1.19 mm] maximum from their nominal position when

measured from the leading edge of the component lead

at the inside tape edge and at the lead egress from the

component.

b. The “C” dimension shall be governed by the overall

length of the reel packaged component. The distance

between flanges shall be 0.125" to 0.250" [3.18 mm to

ꢀ.35 mm] greater than the overall component length.

2. Orientation

All polarized components must be oriented to one

direction. The cathode lead tape shall be a color and the

anode lead tape shall be white.

i. A maximum of 0.25 % of the components per reel

quantity may be missing without consecutive missing

components.

j. Adequate protection must be provided to prevent

physical damage to both reel and components during

shipment and storage.

3. Reeling

a. Components on any reel shall not represent more than

two date codes when date code identification is required.

b. Component leads shall be positioned between pairs of

0.250" [ꢀ.35 mm] tape.

c. The disposable reels have hubs and corrugated

fibreboard flanges and core or equivalent.

4. Marking

Minimum reel and carton marking shall consist of the

following: Customer part number, purchase order no.,

quantity, package date, manufacturer’s name, electrical

value, date code, Vishay Sprague part number and

country of origin.

d. A minimum of 12.0" [304.8 mm] leader of tape shall be

provided before the first and after the last component on

the reel.

e. 50 lb or ꢀ0 lb. Kraft paper must be wound between layer

of components as far as necessary for component

protection. Width of paper to be 0.0ꢀ2" to 0.250"

[1.57 mm to ꢀ.35 mm] less than the “C” dimension

of the reel.

f. A row of components must be centered between tapes

0.047" [1.19 mm]. In addition, individual components

may deviate from center of component row

[0.79 mm].

0.031"

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY

IMPEDANCE

ESR

IMPEDANCE

ESR

220 µF, 10 V

120 µF, 10 V

330 µF, 6 V

180 µF, 6 V

120 µF, 10 V

0.1

220 µF, 10 V

150 µF, 6 V

0.01

100

10K

100K

10M

100

10K

100K

10M

FREQUENCY IN Hz

IMPEDANCE

ESR

IMPEDANCE

ESR

47 µF, 20 V

150 µF, 15 V

100 µF, 20 V

68 µF, 15 V

47 µF, 20 V

0.1

150 µF, 15 V

100 µF, 20 V

0.01

100

10K

100K

10M

100

10K

100K

10M

FREQUENCY IN Hz

IMPEDANCE

ESR

IMPEDANCE

ESR

47 µF, 35 V

22 µF, 50 V

22 µF, 35 V

18 µF, 50 V

0.1

22 µF, 50 V

47 µF, 35 V

0.01

100

10K

100K

10M

100

10K

100K

10M

FREQUENCY IN Hz

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

PERFORMANCE CHARACTERISTICS

Operating Temperature: Capacitors are designed

to operate over the temperature range of - 55 °C to

+ 85 °C with no derating.

ꢀ.

Dissipation Factor: The dissipation factor,

determined from the expression 2fC_R, shall not

exceed values listed in the Standard Ratings table.

1.1

Capacitors may be operated up to + 125 °C with

voltage derating to two-thirds the + 85 °C rating.

ꢀ.1

Measurements shall be made by the bridge method

at, or referred to, a frequency of 1000 Hz and a

temperature of + 25 °C.

+ 85 °C RATING

+ 125 °C RATING

Leakage Current: Capacitors shall be stabilized at

the rated temperature for 30 min. Rated voltage shall

be applied to capacitors for 5 min using a steady

source of power (such as a regulated power supply)

with 1000  resistor connected in series with the

capacitor under test to limit the charging current.

Leakage current shall then be measured.

WORKING

VOLTAGE

(V)

SURGE

VOLTAGE

(V)

WORKING

VOLTAGE

(V)

SURGE

VOLTAGE

(V)

ꢀ

2ꢀ

4ꢀ

ꢀ5

1ꢀ

Note that the leakage current varies with temperature

and applied voltage. See graph below for the

appropriate adjustment factor.

DC Working Voltage: The DC working voltage is the

maximum operating voltage for continuous duty at

the rated temperature.

TYPICAL LEAKAGE CURRENT FACTOR

RANGE AT + 25 °C

Surge Voltage: The surge DC rating is the maximum

voltage to which the capacitors may be subjected

under any conditions, including transients and peak

ripple at the highest line voltage.

1.0

0.8

0.7

0.ꢀ

0.5

0.4

3.1

3.2

Surge Voltage Test: Capacitors shall withstand the

surge voltage applied in series with a 33  5 %

resistor at the rate of 1.5 min on, 1.5 min off at

+ 85 °C, for 1000 successive test cycles.

0.3

0.2

Following the surge voltage test, the dissipation

factor and the leakage current shall meet the initial

requirements; the capacitance shall not have

changed more than 10 %.

0.1

0.08

0.07

0.0ꢀ

0.05

0.04

Capacitance Tolerance: The capacitance of all

capacitors shall be within the specified tolerance

limits of the nominal rating.

0.03

0.02

4.1

Capacitance measurements shall be made by means

of polarized capacitance bridge. The polarizing

voltage shall be of such magnitude that there shall be

no reversal of polarity due to the AC component. The

maximum voltage applied to capacitors during

measurement shall be 2 V_RMSat 1000 Hz at + 25 °C.

If the AC voltage applied is less than 0.5 V_RMS, no DC

bias is required. Measurement accuracy of the

bridge shall be within 2 %.

0.01

0.008

0.007

0.00ꢀ

0.005

0.004

R E

0.003

0.002

Capacitance Change with Temperature: The

capacitance change with temperature shall not

exceed the following percentage of the capacitance

measured at + 25 %

0.001

10 20 30 40 50 ꢀ0 70 80 90 100

PERCENT OF RATED VOLTAGE

- 55 °C

- 10 %

+ 85 °C

+ 8 %

+ 125 °C

+ 12 %

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

PERFORMANCE CHARACTERISTICS (Continued)

7.1

At + 25 °C, the leakage current shall not exceed the

10.3.4 A cathode ray oscilloscope or other comparable

means shall be used in determining electrical

intermittency during test. The AC voltage applied

value listed in the Standard Ratings table.

7.2

At + 85 °C, the leakage current shall not exceed

10 times the value listed in the Standard Ratings

table.

shall not exceed 2 V_RMS

10.3.5 Electrical tests shall show no evidence of intermittent

contacts, open circuits or short circuits during these

tests.

10.3.ꢀ There shall be no mechanical damage to these

capacitors as a result of these tests.

10.3.7 Following the high frequency vibration test,

capacitors shall meet the original limits for

capacitance, dissipation factor and leakage current.

7.3

At + 125 °C, the leakage current shall not exceed

15 times the value listed in the Standard Ratings

table.

Life Test: Capacitors shall withstand rated DC

voltage applied at + 85 °C for 2000 h or rated DC

voltage applied at + 125 °C for 1000 h.

8.1

Following the life test, the dissipation factor shall

meet the initial requirement; the capacitance change

shall not exceed 2 %; the leakage current shall not

exceed 125 % of the original requirement.

11.

Acceleration Test:

11.1 Capacitors shall be rigidly mounted by means of

suitable brackets.

Shelf Test: Capacitors shall withstand a shelf test for

5000 h at a temperature of + 85 °C, with no voltage

applied.

11.2 Capacitors shall be subjected to

a constant

acceleration of 100 g for a period of 10 s in each of 2

mutually perpendicular planes.

9.1

Following the shelf test, the leakage current shall

meet the initial requirement; the dissipation factor

shall not exceed 150 % of the initial requirement; the

capacitance change shall not exceed 5 %.

11.2.1 The direction of motion shall be parallel to and

perpendicular to the cylindrical axis of the

capacitors.

11.3 Rated DC voltage shall be applied during

acceleration test.

10.

Vibration Tests: Capacitors shall be subjected to

vibration tests in accordance with the following

criteria.

11.3.1 A cathode ray oscilloscope or other comparable

means shall be used in determining electrical

intermittency during test. The AC voltage applied

10.1 Capacitors shall be secured for test by means of a

rigid mounting using suitable brackets.

shall not exceed 2 V_RMS

10.2 Low Frequency Vibration: Vibration shall consist of a

simple harmonic motion having an amplitude of

0.03" [0.7ꢀ] and a maximum total excursion of 0.0ꢀ"

[1.52], in a direction perpendicular to the major axis

of the capacitor.

10.2.1 Vibration frequency shall be varied uniformly

between the approximate limits of 10 Hz to 55 Hz

during a period of approximately one minute,

continuously for 1 h and 1.5 h.

11.4 Electrical tests shall show no evidence of intermittent

contacts, open circuits or short circuits during these

tests.

11.5 There shall be no mechanical damage to these

capacitors as a result of these tests.

11.ꢀ Following the acceleration test, capacitors shall meet

the original limits for capacitance, dissipation factor

and leakage current.

12.

Shock Test:

10.2.2 A cathode ray oscilloscope or other comparable

means shall be used in determining electrical

intermittency during the final 30 minutes of the test.

12.1 Capacitors shall be rigidly mounted by means of

suitable brackets. The test load shall be distributed

uniformly on the test platform to minimize the effects

of unbalanced loads.

12.1.1 Test equipment shall be adjusted to produce a shock

of 100 g peak with a duration of ꢀ ms and a sawtooth

waveform at a velocity change of 9.7 ft./s.

12.2 Capacitors shall be subjected to 3 shocks applied in

each of 3 directions corresponding to the 3 mutually

perpendicular axes of the capacitors.

12.3 Rated DC voltage shall be applied to capacitors

during test.

The AC voltage applied shall not exceed 2 V_RMS

10.2.3 Electrical tests shall show no evidence of intermittent

contacts, open circuits or short circuits during these

tests.

10.2.4 Following the low frequency vibration test,

capacitors shall meet the original requirements for

leakage current and dissipation factor; capacitance

change shall not exceed

measured value.

5 % of the original

10.3 High Frequency Vibration: Vibration shall consist of

a simple harmonic motion having an amplitude of

0.0ꢀ" [1.52] 10 % maximum total excursion or 20 g

peak, whichever is less.

10.3.1 Vibration frequency shall be varied logarithmically

from 50 Hz to 2000 Hz and return to 50 Hz during a

cycle period of 20 min.

10.3.2 The vibration shall be applied for 4 h in each of

2 directions, parallel and perpendicular to the major

axis of the capacitors.

12.3.1 A cathode ray oscilloscope or other comparable

means shall be used in determining electrical

intermittency during test. The AC voltage applied

shall not exceed 2 V_RMS

12.4 Electrical tests shall show no evidence of intermittent

contacts, open circuits or short circuits during these

tests.

12.5 There shall be no mechanical damage to these

capacitors as a result of these tests.

12.ꢀ Following the shock test, capacitors shall meet the

original limits for capacitance, dissipation factor and

leakage current.

10.3.3 Rated DC voltage shall be applied during the

vibration cycling.

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

PERFORMANCE CHARACTERISTICS (Continued)

13.

Moisture Resistance:

15.

Thermal Shock And Immersion Cycling:

13.1 Capacitors shall be subjected to temperature

cycling at 90 % to 98 % relative humidity, in a test

chamber constructed of non-reactive materials

(non-resiniferous and containing no formaldehyde or

phenol). Steam or distilled, demineralized or

deionized water having a pH value between ꢀ.0 and

7.2 at + 23 °C shall be used to obtain the required

humidity. No rust, corrosive contaminants or

dripping condensate shall be imposed on test

specimens.

15.1 Capacitors shall be conditioned prior to temperature

cycling for 15 min at + 25 °C, at less than 50 %

relative humidity and a barometric pressure at 28" to

31".

15.2 Capacitors shall be subjected to thermal shock in a

cycle of exposure to ambient air at

- ꢀ5 °C (+ 0 °C, - 5 °C) for 30 min, then,

+ 25 °C (+ 10 °C, - 5 °C) for 5 min, then

+ 125 °C (+ 3 °C, - 0 °C) for 30 min, then

+ 25 °C (+ 10 °C, - 5 °C) for 5 min, for 5 cycles.

13.1.1 Capacitors shall be mounted by their normal

mounting means in a normal mounting position and

placed in a test chamber so that uniform and

thorough exposure is obtained.

15.3 Between 4 h and 24 h after temperature cycling,

capacitors shall be subjected to immersion in a bath

of fresh tap water with the non-corrosive dye

Rhodamine B added, at + ꢀ5 °C (+ 5 °C, - 0 °C) for

15 min, then, within 3 s, immersed in a saturated

solution of sodium chloride and water with

Rhodamine B added, at a temperature of + 25 °C

(+ 10 °C, - 5 °C) for 15 min, for 2 cycles.

13.1.2 No conditioning or initial measurements will be

performed prior to temperature cycling. Polarization

and load voltages are not applicable.

13.1.3 Capacitors shall be subjected to temperature cycling

from + 25 °C to + ꢀ5 °C to + 25 °C (+ 10 °C, - 2 °C)

over a period of 8 h, at 90 % to 98 % relative

humidity, for 20 cycles.

15.3.1 Capacitors shall be thoroughly rinsed and wiped or

air-blasted dry immediately upon removal from

immersion cycling.

13.1.4 Temperature cycling shall be stopped after an even

number of cycles 5 times during the first 18 cycles,

and the capacitor shall be alloweed to stabilize at

high humidity for 1 h to 4 h.

15.4 Capacitors shall show no evidence of harmful or

extensive corrosion, obliteration of marking or other

visible damage.

15.5 Following the thermal shock immersion cycling test,

capacitors shall meet the original requirements for

leakage current and dissipation factor; capacitance

13.1.5 After stabilization, capacitors shall be removed from

the humidity chamber and shall be conditioned for

3 h at - 10 °C 2 °C.

change shall not exceed

measured value.

5 % of the original

13.1.ꢀ After cold conditioning, capacitors shall be subjected

to vibration cycling consisting of a simple harmonic

vibration having an amplitude of 0.03" [0.7ꢀ] and a

maximum total excursion of 0.0ꢀ" [1.52] varied

uniformly from 10 Hz to 55 Hz to 10 Hz over a period

of 1 min, for 15 cycles.

15.ꢀ Capacitors shall be opened and examined. There

shall be no evidence of dye penetration.

1ꢀ.

Reduced Pressure Test:

1ꢀ.1 Capacitors shall be stabilized at a reduced pressure

of 0.315" [8.0] of mercury, equivalent to an altitude of

100 000 feet [30.480 m], for a period of 5 min.

13.1.7 Capacitors shall then be returned to temperature/

humidity cycling.

1ꢀ.2 Rated DC voltage shall be applied for 1 min.

13.2 After completion of temperature cycling, capacitors

shall be removed from the test chamber and

stabilized at room temperature for 2 h to ꢀ h.

1ꢀ.3 Capacitors shall not flash over nor shall end seals be

damaged.

1ꢀ.4 Following the reduced pressure test, the

capacitance, equivalent series resistance and

leakage current shall meet the original requirements.

13.3 Capacitors shall show no evidence of harmful or

extensive corrosion, obliteration or marking or other

visible damage.

17.

Lead Pull Test: Leads shall withstand a tensile

stress of 3 pounds (1.4 kg) applied in any direction for

30 s.

13.4 Following the moisture resistance test, capacitors

shall meet the original limits for capacitance,

dissipation factor and leakage current.

18.

Marking: Capacitors shall be marked with Sprague

or (2); the type number 550D; rated capacitance and

tolerance, rated DC working voltage and the

standard EIA date code.

14.

Insulating Sleeves:

14.1 Capacitors with insulating sleeves shall withstand a

2000 V_DCpotential applied for 1 min between the

case and a metal “V” block in intimate contact with

the insulating sleeve.

18.1 Capacitors shall be marked on one end with a plus

sign (+) to identify the positive terminal.

14.2 Capacitors with insulating sleeves shall have the

insulation resistance measured between the case

and a metal “V” block in intimate contact with the

insulating sleeve. The insulation resistance shall be

at least 1000 M.

18.2 Vishay Sprague reserves the right to furnish

capacitors of higher working voltages than those

ordered, where the physical size of the higher voltage

units is identical to that of the units ordered.

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

550D

Vishay Sprague

www.vishay.com

GUIDE TO APPLICATION

AC Ripple Current: The maximum allowable ripple

current shall be determined from the formula:

Power Dissipation: The figures shown relate to an

approximate + 20 °C rise in case temperature

measured in free air. Power dissipation will be

affected by the heat sinking capability of the

mounting surface. Non-sinusoidal ripple current may

produce heating effects which differ from those

shown. It is important that the equivalent Irms value

be established when calculating permissable

operating levels.

R_ESR

I_RMS

------------

where,

P =

Power Dissipation in W at + 25 °C as given in

the table in paragraph number 5

(Power Dissipation)

MAXIMUM PERMISSIBLE

POWER DISSIPATION AT

+ 25 °C (W IN FREE AIR)

_ESR= The capacitor Equivalent Series Resistance

CASE CODE

at the specified frequency

AC Ripple Voltage: The maximum allowable ripple

voltage shall be determined from the formula:

0.185

0.225

V_RMS= Z ------------

R_ESR

or, from the formula:

V_RMS= I_RMSx Z

where,

P =

Power Dissipation in W at + 25 °C as given

in the table in paragraph number 5

(Power Dissipation).

R_ESR

Z =

The capacitor Equivalent Series Resistance

at the specified frequency.

The capacitor Impedance at the specified

frequency.

2.1

2.2

The sum of the peak AC voltage plus the DC voltage

shall not exceed the DC voltage rating of the

capacitor.

The sum of the negative peak AC voltage plus the

applied DC voltage shall not allow a voltage reversal

exceeding 15 % of the DC working voltage at

+ 25 °C.

Reverse Voltage: These capacitors are capable of

withstanding peak voltages in the reverse direction

equal to 15 % of the DC rating at + 25 °C, 10 % of

the DC rating at + 55 °C; 5 % of the DC rating at

+ 85 °C.

Temperature Derating: If these capacitors are to be

operated at temperatures above + 25 °C, the

permissible RMS ripple current or voltage shall be

calculated using the derating factors as shown:

TEMPERATURE

+ 25 °C

DERATING FACTOR

1.0

0.8

0.ꢀ

0.4

+ 55 °C

+ 85 °C

+ 125 °C

Revision: 01-Mar-12

Document Number: 40017

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

550D107X0010R2BE3 [VISHAY]

相关型号：

550D107X0010R2TE3

550D107X0015S2

550D107X0015S2BE3

550D107X0015S2TE3

550D107X0020S2

550D107X0020S2B

550D107X0020S2BE3

550D107X0020S2T

550D107X0020S2TE3

550D107X5010R2TE3

550D107X5015S2BE3

550D107X5020S2TE3