首页 |元器件品牌

3KASMC18AHE3_A/I [VISHAY]

Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN;
3KASMC18AHE3_A/I
型号： 3KASMC18AHE3_A/I
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN

局域网 光电二极管
文件： 总5页 (文件大小：85K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
3KASMC10 thru 3KASMC43A  
www.vishay.com  
Vishay General Semiconductor  
Surface Mount PAR® Transient Voltage Suppressors  
High Temperature Stability and High Reliability Conditions  
FEATURES  
• Junction passivation optimized design  
passivated anisotropic rectifier technology  
• TJ = 185 °C capability suitable for high  
reliability and automotive requirement  
• Available in uni-directional polarity only  
• 3000 W peak pulse power capability with a  
10/1000 μs waveform  
• Excellent clamping capability  
• Very fast response time  
• Low incremental surge resistance  
• Meets MSL level 1, per J-STD-020, LF maximum peak of  
260 °C  
DO-214AB (SMCJ)  
• AEC-Q101 qualified  
• Material categorization: For definitions of compliance  
please see www.vishay.com/doc?99912  
TYPICAL APPLICATIONS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, automotive, and telecommunication.  
PRIMARY CHARACTERISTICS  
VWM  
10 V to 43 V  
VBR  
11.1 V to 52.8 V  
3000 W  
MECHANICAL DATA  
PPPM  
Case: DO-214AB (SMCJ)  
PD  
6.0 W  
Molding compound meets UL 94 V-0 flammability rating  
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified  
(“_X” denotes revision code e.g. A, B, .....)  
IFSM  
200 A  
TJ max.  
Polarity  
Package  
185 °C  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
HE3 suffix meets JESD 201 class 2 whisker test  
Uni-directional  
DO-214AB (SMCJ)  
Polarity: Color band denotes cathode end  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
PPPM  
IPPM  
VALUE  
3000  
UNIT  
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 3)  
Peak power pulse current with a 10/1000 μs waveform (1) (fig. 1)  
Peak forward surge current 8.3 ms single half sine-wave (2)  
Power dissipation on infinite heatsink, TL = 75 °C (fig. 6)  
Maximum instantaneous forward voltage at 100 A (2)  
Operating junction and storage temperature range  
See next table  
200  
A
IFSM  
A
PD  
6.0  
W
VF  
3.5  
V
TJ, TSTG  
-65 to +185  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2.  
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum  
(2)  
Revision: 25-Apr-14  
Document Number: 88480  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
3KASMC10 thru 3KASMC43A  
www.vishay.com  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
MAXIMUM  
MAXIMUM  
MAXIMUM  
VOLTAGE  
TEST  
STAND-OFF  
DEVICE  
MARKING  
CODE  
REVERSE  
LEAKAGE  
AT VWM  
PEAK PULSE CLAMPING  
(1)  
DEVICE TYPE  
V
BR AT IT  
(V)  
CURRENT VOLTAGE  
SURGE  
VOLTAGEAT  
IPPM  
IT  
(mA)  
VWM  
(V)  
CURRENT  
ID (μA)  
IR (μA)  
I
PPM (A) (2)  
VC (V)  
MIN.  
MAX.  
TJ = 150 °C  
3KASMC10  
3KASMC10A  
3KASMC11  
3KASMC11A  
3KASMC12  
3KASMC12A  
3KASMC13  
3KASMC13A  
3KASMC14  
3KASMC14A  
3KASMC15  
3KASMC15A  
3KASMC16  
3KASMC16A  
3KASMC17  
3KASMC17A  
3KASMC18  
3KASMC18A  
3KASMC20  
3KASMC20A  
3KASMC22  
3KASMC22A  
3KASMC24  
3KASMC24A  
3KASMC26  
3KASMC26A  
3KASMC28  
3KASMC28A  
3KASMC30  
3KASMC30A  
3KASMC33  
3KASMC33A  
3KASMC36  
3KASMC36A  
3KASMC40  
3KASMC40A  
3KASMC43  
3KASMC43A  
3AW  
3AX  
3AY  
3AZ  
3BD  
3BE  
3BF  
3BG  
3BH  
3BK  
3BL  
3BM  
3BN  
3BP  
3BQ  
3BR  
3BS  
3BT  
3BU  
3BV  
3BW  
3BX  
3BY  
3BZ  
3CD  
3CE  
3CF  
3CG  
3CH  
3CK  
3CL  
3CM  
3CN  
3CP  
3CQ  
3CR  
3CS  
3CT  
11.1  
11.1  
12.2  
12.2  
13.3  
13.3  
14.4  
14.4  
15.6  
15.6  
16.7  
16.7  
17.8  
17.8  
18.9  
18.9  
20.0  
20.0  
22.2  
22.2  
24.4  
24.4  
26.7  
26.7  
28.9  
28.9  
31.1  
31.1  
33.3  
33.3  
36.7  
36.7  
40.0  
40.0  
44.4  
44.4  
47.8  
47.8  
13.6  
12.3  
14.9  
13.5  
16.3  
14.7  
17.6  
15.9  
19.1  
17.2  
20.4  
18.5  
21.8  
19.7  
23.1  
20.9  
24.4  
22.1  
27.1  
24.5  
29.8  
26.9  
32.6  
29.5  
35.3  
31.9  
38.0  
34.4  
40.7  
36.8  
44.9  
40.6  
48.9  
44.2  
54.3  
49.1  
58.4  
52.8  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
10  
10  
11  
11  
12  
12  
13  
13  
14  
14  
15  
15  
16  
16  
17  
17  
18  
18  
20  
20  
22  
22  
24  
24  
26  
26  
28  
28  
30  
30  
33  
33  
36  
36  
40  
40  
43  
43  
5.0  
5.0  
5.0  
5.0  
2.0  
2.0  
2.0  
2.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
50  
50  
50  
50  
20  
20  
20  
20  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
15  
15  
15  
15  
20  
20  
20  
20  
20  
20  
160  
177  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
38.9  
46.6  
42.1  
50.0  
45.4  
53.5  
48.4  
59.0  
53.3  
64.3  
58.1  
71.4  
64.5  
76.7  
69.4  
149  
165  
136  
151  
126  
140  
116  
129  
112  
123  
104  
115  
98.4  
109  
93.2  
103  
83.8  
92.6  
76.1  
84.5  
69.8  
77.1  
64.4  
71.3  
60.0  
66.1  
56.1  
62.0  
50.8  
56.3  
46.7  
51.6  
42.0  
46.5  
39.1  
43.2  
Notes  
(1)  
(2)  
(3)  
Pulse test: tp 50 ms  
Surge current waveform per fig. 3 and derate per fig. 2  
All terms and symbols are consistent with ANSI/IEEE C62.35  
Revision: 25-Apr-14  
Document Number: 88480  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
3KASMC10 thru 3KASMC43A  
www.vishay.com  
Vishay General Semiconductor  
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
PARAMETER  
Typical thermal resistance, junction to ambient air (1)  
SYMBOL  
VALUE  
77.5  
UNIT  
RJA  
°C/ W  
Typical thermal resistance, junction to leads  
RJL  
18.3  
Note  
(1)  
Mounted on minimum recommended pad layout  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
UNIT WEIGHT (g) PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
3KASMC10AHE3_A/H (1)  
3KASMC10AHE3_A/I (1)  
0.211  
0.211  
H
I
850  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
3500  
Note  
(1)  
AEC-Q101 qualified  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
100  
10  
150  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
tr = 10 µs  
Peak Value  
IPPM  
100  
50  
0
Half Value -  
IPP  
2
IPPM  
1
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
0.1  
1.0  
3.0  
4.0  
0
2.0  
1
10  
100  
1000  
10 000  
t - Time (ms)  
td - Pulse Width (µs)  
Fig. 1 - Peak Pulse Power Rating Curve  
Fig. 3 - Pulse Waveform  
100  
75  
10 000  
1000  
100  
Measured at  
Zero Bias  
50  
25  
Measured at  
Stand-Off Voltage  
TJ = 25 °C  
f = 1.0 MHz  
V
sig = 50 mVp-p  
0
50  
TJ - Initial Temperature (°C)  
0
100  
150  
200  
10  
20  
30  
40 50  
VWM - Reverse Stand-off Voltage (V)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 4 - Typical Junction Capacitance  
Revision: 25-Apr-14  
Document Number: 88480  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
3KASMC10 thru 3KASMC43A  
www.vishay.com  
Vishay General Semiconductor  
200  
6
TJ = TJ max.  
8.3 ms Single Half Sine-Wave  
60 Hz  
Resistive or  
Inductive Load  
5
100  
50  
4
3
2
1
0
10  
1
5
10  
50  
100  
75  
150  
175  
25  
50  
100 125  
200  
0
Number of Cycles at 60 Hz  
TL - Lead Temperature (°C)  
Fig. 5 - Maximum Non-Repetitive/Peak Forward Surge Current  
Fig. 6 - Power Derating Curve  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-214AB (SMCJ)  
Mounting Pad Layout  
Cathode Band  
0.185 (4.69)  
MAX.  
0.126 (3.20)  
0.114 (2.90)  
0.246 (6.22)  
0.220 (5.59)  
0.126 (3.20)  
MIN.  
0.280 (7.11)  
0.260 (6.60)  
0.060 (1.52)  
MIN.  
0.012 (0.305)  
0.006 (0.152)  
0.320 REF.  
0.103 (2.62)  
0.079 (2.06)  
0.060 (1.52)  
0.030 (0.76)  
0.008 (0.2)  
0 (0)  
0.320 (8.13)  
0.305 (7.75)  
Revision: 25-Apr-14  
Document Number: 88480  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free  
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference  
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21  
conform to JEDEC JS709A standards.  
Revision: 02-Oct-12  
Document Number: 91000  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明