303139-481R-D-B-T [VISHAY]
Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.5% +/-Tol, -.2,.2ppm/Cel, 2412;型号: | 303139-481R-D-B-T |
厂家: | VISHAY |
描述: | Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.5% +/-Tol, -.2,.2ppm/Cel, 2412 电阻器 |
文件: | 总7页 (文件大小:502K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
303139, 303140
Vishay Foil Resistors
Models # 303139 and 303140 - Molded Surface Mount Space and Military
Grade Resistors SMRxDZ with Screen/Test Flow in Compliance with
EEE-INST-002, (Tables 2A and 3A, Film/Foil, Level 1) and MIL-PRF-55182
FEATURES
• Temperature coefficient of resistance (TCR):
± 0.2 ppm°C typical (- 55 °C to + 125 °C, + 25 °C ref.)
• Tolerance: to ± 0.02 %
• Power coefficient of resistance (PCR)
“ΔR due to self heating”: 5 ppm at rated power
• Flexible terminations ensure minimal stress transference
from the PCB due to a difference in thermal coefficient of
expansions (TCE)
• Electrostatic discharge (ESD) up to 25 000 V
• Load life stability: ± 0.005 % (70 °C, 2000 h at rated power)
INTRODUCTION
• Resistance range: 5 Ω to 40 kΩ
The 303139, 303140 are ultra high precision molded surface
• Vishay Foil resistors are not restricted to standard values;
mountable resistors offering all the elements of precision;
specific “as requested” values can be supplied at no extra
including low TCR, tight tolerance, long term stability, low
cost or delivery (e.g. 1K2345 vs. 1K)
noise, low thermal EMF, and non-measurable voltage
• Maximum power: to 600 mW at 70 °C
coefficient. One of the important parameters influencing
stability is the temperature coefficient of resistance (TCR).
Although the TCR of foil resistors is considered extremely
low, this characteristic has been further refined over the
years. These resistors utilize ultra high precision Bulk Metal®
Z-Foil.
• Non-inductive, non-capacitive design
• Current noise: - 40 dB
• Voltage coefficient: < 0.1 ppm/V
• Non-inductive: < 0.08 µH typical
• Non hot spot design
The Z-Foil technology provides a significant reduction of
the resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
• Terminal finish: tin/lead alloy
• Matched sets with TCR tracking are available upon
request
Voltage division with tight tracking < 2 ppm/°C can be
achieved with 2 randomly selected units even with a large
ratio between the two values.
• For oriented performances please contact us
•
For prototype units, append a “U” to the model number
(example: 303139U). These units pass all tests per table 3
(page 4) with no destructive qualification testing required
(table 4, page 4). For more information, please contact
foil@vishaypg.com
Our application engineering department is available to
advise and make recommendations.
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE
FIGURE 1 - POWER DERATING CURVE
- 55 °C
+ 70 °C
(- 55 °C to + 125 °C, + 25 °C ref.)
200
175
150
125
100
75
TYPICAL TCR AND
MAX. SPREAD
(ppm/°C)
ABSOLUTE
TOLERANCE
VALUE
250 Ω to 40 kΩ
50 Ω to < 250 Ω
20 Ω to < 50 Ω
10 Ω to < 20 Ω
5 Ω to < 10 Ω
± 0.02 %
± 0.05 %
± 0.1 %
± 0.2 %
± 0.5 %
± 0.2 ± 1.8
± 0.2 ± 1.8
± 0.2 ± 2.8
± 0.2 ± 4.8
± 0.2 ± 6.8
50
25
0
- 75
- 25
+ 25
+ 75
+ 125
+ 175
Ambient Temperature (°C)
Document Number: 63165
Revision: 27-Jul-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1
303139, 303140
Vishay Foil Resistors
TABLE 2 - PERFORMANCE SPECIFICATIONS
MAXIMUM LIMIT (1)
303139 303140
TEST
CONDITIONS
303139
303140
Resistance Range
Power Rating
5 Ω to 14 kΩ
5 Ω to 40 kΩ
5 Ω to 10 kΩ
10 kΩ to 14 kΩ
5 Ω to 30 kΩ
0.6 W at 70 °C
30 kΩ to 40 kΩ
0.4 W at 70 °C
0.2 W at 125 °C
0.250 W at 70 °C 0.160 W at 70 °C
0.125 W at 125 °C 0.08 W at 125 °C 0.3 W at 125 °C
See figure 1
Maximum Working Voltage
47 V
127 V
Maximum Operating
Temperature
+ 175 °C (see figure 1)
Working Temperature Range
- 55 °C to + 125 °C (MIL range)
0.02 % for values higher
than 100 Ω
0.03 % for values between
Thermal Shock
- 65 °C to + 150 °C; 25 cycles
5 Ω to 100 Ω
6.25 x rated power (at + 125 °C); 5 s,
not to exceed 70.5 V for 303139, 190 V for 303140
Short Time Overload
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
over 10 000 MΩ
± 0.03 %
Low Temperature Operation
- 65 °C, 24 h (no load): 45 min at rated power
Dielectric Withstanding
Voltage
Atmospheric pressure; AC 200 V; 1 min
DC 100 V; 1 min
Insulation Resistance (MΩ)
Resistance to
Soldering Heat (%)
260 °C; 10 s
Moisture Resistance
Shock
+ 65 °C to - 10 °C; 90 % to 98 % RH; rated power; 240 h
100 G; sawtooth; axes Y, Z; 10 shocks per each axis
10 Hz ~ 2000 Hz ~ 10 Hz; 20 G; axes Y, Z; 4 h in each axis
125 °C, rated power
± 0.02 % (200 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 % (500 ppm)
± 0.1 % (1000 ppm)
Vibration, High Frequency
Load Life Stability (2000 h)
High Temperature Exposure
Weight
175 °C; no load 2000 h
0.1143 g
0.244 g
Packaging
Bulk (loose) or tape and reel, per EIA-481-1
Note
(1) As shown + 0.01 Ω to allow for measurement error at low values
www.foilresistors.com
2
For any questions, contact: foil@vishaypg.com
Document Number: 63165
Revision: 27-Jul-10
303139, 303140
Vishay Foil Resistors
FIGURE 2 - DIMENSIONS in inches (millimeters)
Side View
L
TH Minimum
End View
Stand Off
W
Top View
VALUE (5 DIGITS)
TOLERANCE
P
P
H
Z-FOIL
INDICATOR
z
100R0T
(DATE CODE)
V
TW
Bottom View
MODEL
L
W
H
P
TW
TH (minimum)
0.236 ± 0.012
(5.99 ± 0.30)
0.126 ± 0.012
(3.20 ± 0.30)
0.098 ± 0.012
(2.49 ± 0.30)
0.051 ± 0.012
(1.30 ± 0.30)
0.087 ± 0.004
(2.21 ± 0.10)
0.039
(0.99)
303139
0.287 ± 0.012
(7.29 ± 0.30)
0.170 ± 0.012
(4.32 ± 0.30)
0.110 ± 0.012
(2.79 ± 0.30)
0.051 ± 0.012
(1.30 ± 0.30)
0.095 ± 0.004
(2.41 ± 0.10)
0.039
(0.99)
303140
FIGURE 3 - RECOMMENDED MOUNTING PAD GEOMETRIES in inches (millimeters)
Reflow Solder Pads
D
B
C
E
A
A
B
C
D
E
MODEL
METHOD
Reflow
MIN.
REF
REF
± 0.04 (± 1.02)
REF
0.110
(2.79)
0.106
(2.69)
0.124
(3.15)
0.337
(8.55)
0.050
(1.27)
303139
0.118
(3.00)
0.106
(2.69)
0.175
(4.45)
0.388
(9.86)
0.050
(1.27)
303140
Reflow
Per IPC-SM-782 Rev A
FIGURE 5 - TYPICAL RESISTANCE/
TEMPERATURE CURVE (Z-FOIL)
FIGURE 4 - TRIMMING TO VALUES
(Conceptual Illustration)
TCR Chord Slopes for Different Temperature Ranges
+ 500
+ 400
+ 300
+ 200
+ 100
0
Interloop
Current Path
Capacitance
Before Trimming
Reduction
in Series
ΔR
Current Path
After Trimming
Mutual
R
Inductance
Reduction due
to Opposing
Current in
(ppm)
- 100
- 200
- 300
- 400
- 500
0.05 ppm/°C
- 0.1 ppm/°C 0.1 ppm/°C
0.14 ppm/°C
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing Resistance
Adjacent Lines
- 0.16 ppm/°C
0.2 ppm/°C
- 55
- 25
0
+ 25
+ 60 + 75 + 100 + 125
Note: Foil shown in black, etched spaces in white
Ambient Temperature (°C)
Notes
• For more details, see table 1
• The TCR values for < 80 Ω are influenced by the termination
composition and the result in deviation from this curve
Document Number: 63165
Revision: 27-Jul-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
3
303139, 303140
Vishay Foil Resistors
NOTES
• For prototype units, append a “U” to the model number (example: 303139U). These units have all of the table 2A 100 % tests
performed, with no destructive qualification testing required.
• Measurement error allowed for ΔR limits: 0.01 Ω.
TABLE 3 - EEE-INST-002 (TABLE 2A FILM/FOIL, LEVEL 1) 100 % TESTS/INSPECTIONS
Pre-cap Visual Inspection
Performed in production flow on welded chip on strip
RC Record
In tolerance
Thermal Shock
25 x (- 65 °C to + 150 °C)
Short Time Overload
RC Record
6.25 x rated power (at + 125 °C), 5 s, not to exceed 70.5 V for 303139, 190 V for 303140
In tolerance, ΔR = 0.02 % for values higher than 100 Ω, ΔR = 0.03 % for values between 5 Ω to 100 Ω
Rated power, 100 h, + 125 °C
Power Conditioning
Component Linearity Test
RC Record
In tolerance ΔR ≤ 200 ppm for R > 100 Ω, ΔR ≤ 500 ppm for R ≤ 100 Ω
PDA 3 % on ΔR > 0.05 % only
Final Inspection
Visual Inspection
Mechanical Inspection
Materials, design, marking, etc.
Physical dimensions sample size: 3 units. For a min. of one failure - 100 % inspection
TABLE 4 - EEE-INST-002 (TABLE 3A FILM/FOIL, LEVEL 1) DESTRUCTIVE TESTS
Sample size: 3(0)
Group 2
Solderability
MIL-STD-202, method 208
MIL-STD-202, method 215
Resistance to solvents
Sample size: 10(0)
Thermal shock
25 x (- 65 °C to + 150 °C)
ΔR = 0.02 % for values higher than 100 Ω
ΔR = 0.03 % for values between 5 Ω to 100 Ω
MIL-STD-202, method 107
303139, 303140
Values
TCR limits
± 2 ppm/°C
± 3 ppm/°C
± 5 ppm/°C
± 7 ppm/°C
100 Ω to 40 kΩ
20 Ω to < 100 Ω
10 Ω to < 20 Ω
5 Ω to < 10 Ω
Group 3
TCR - mounted on FR4
Low temperature storage
Temperature range: - 55 °C/+ 25 °C/+ 125 °C
- 65 °C no load dwell for 24 h ± 4 h
+ 25 °C ambient no load dwell for 2 h to 8 h
ΔR = 0.01 %
Low temperature operation
Short time overload
- 65 °C no load dwell for 1 h
rated power (at + 125 °C) for 45 min
+ 25 °C ambient no load dwell for 24 h ± 4 h
ΔR = 0.01 %
6.25 x rated power (at + 125 °C), not to exceed 70.5 V for 303139, 190 V for 303140
www.foilresistors.com
4
For any questions, contact: foil@vishaypg.com
Document Number: 63165
Revision: 27-Jul-10
303139, 303140
Vishay Foil Resistors
TABLE 4 - EEE-INST-002 (TABLE 3A FILM/FOIL, LEVEL 1) DESTRUCTIVE TESTS
Sample size: 9(0)
DWV
ΔR = 0.01 %
Atmospheric pressure, 200 VAC, 1 min
100 VDC
MIL-STD-202, method 301
Insulation resistance
MIL-STD-202, method 302
IR ≥ 104 MΩ
Resistance to soldering
heat - mounted on FR4
ΔR = 0.03 %
Group 4
MIL-STD-202, method 210
condition B
260 °C, 10 s
Moisture resistance
ΔR = 0.02 %
MIL-STD-202, method 106
DWV, at 200 VAC, 1 min
atmospheric pressure
ΔR = 0.01 %
IR ≥ 100 MΩ
Insulation resistance,
at 100 VDC
Sample size: 9(0) - mounted on FR4
Shock
ΔR = 0.01 %
MIL-PRF-55182 and MIL-STD-202, method 213, condition I
10 shocks in each of two mutually perpendicular planes (Y, Z) 100 G, 6 ms, sawtooth
Group 5
Vibration
ΔR = 0.01 %
MIL-PRF-55182 and MIL-STD-202, method 204, condition D
10 Hz - 2000 Hz - 10 Hz, 20 G, planes Y, Z
In each of two mutually perpendicular planes (Y, Z), 20 G, 4 h in each plane
Sample size: 12(0) - mounted on FR4
Life
ΔR = 0.05 %
Group 6
MIL-STD-202, method 108
1.5 h on, 0.5 h off, 125 °C, rated power (at + 125 °C), 2000 h
Sample Size: 5(0) - not mounted
Voltage coefficient
5 ppm/V
Group 8
Group 9
MIL-PRF-55182 and
MIL-STD-202, method 309
Working voltage
Resistance range > 1 K
Sample size: 5(0)
ΔR = 0.1 %
+ 175 °C, 2000 h, no load
High temperature exposure
Thermal outgassing
Group
10
Contact Vishay application engineering for review
Note
• The sample units of table 4 should be randomly selected from lots which successfully passed the table 3 tests
Document Number: 63165
Revision: 27-Jul-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
5
303139, 303140
Vishay Foil Resistors
PART NUMBER IDENTIFICATION
Model #
303139
SMR1DZ
303140
SMR3DZ
Base Model
Value Range (Space Applications)
5 Ω to 14 kΩ
5 Ω to 40 kΩ
Part Number:
{Model}
-
{Value}
-
{Tolerance}
-
{Termination}
-
{Packaging}
Absolute Tolerance
Code
Termination
Code
Packaging
Bulk
Code
0.02 %
0.05 %
0.1 %
0.2 %
0.5 %
Q
A
B
E
D
Tin/lead
B
L
T
Tape and reel
Example: 303139
-
8K0225 - QBT
303139, 8.0225 kΩ, 0.02 %, tin/lead termination, tape and reel packaging
www.foilresistors.com
6
For any questions, contact: foil@vishaypg.com
Document Number: 63165
Revision: 27-Jul-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
相关型号:
303139-481R-E-B-L
Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.2% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-481R-E-B-T
Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.2% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-481R-Q-B-L
Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.02% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-481R-Q-B-T
Fixed Resistor, Metal Foil, 0.25W, 481ohm, 47V, 0.02% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-481R00-QBL
Fixed Resistor, Metal Foil, 0.125W, 481ohm, 47V, 0.02% +/-Tol, 0.2ppm/Cel, Surface Mount, 2413, CHIP
VISHAY
303139-481R00-QBT
Fixed Resistor, Metal Foil, 0.125W, 481ohm, 47V, 0.02% +/-Tol, 0.2ppm/Cel, Surface Mount, 2413, CHIP
VISHAY
303139-4K02-A-B-T
Fixed Resistor, Metal Foil, 0.25W, 4020ohm, 47V, 0.05% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-4K07-Q-B-T
Fixed Resistor, Metal Foil, 0.25W, 4070ohm, 47V, 0.02% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-4K32-Q-B-T
Fixed Resistor, Metal Foil, 0.25W, 4320ohm, 47V, 0.02% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-4K48-B-B-T
Fixed Resistor, Metal Foil, 0.25W, 4480ohm, 47V, 0.1% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-4K48-D-B-L
Fixed Resistor, Metal Foil, 0.25W, 4480ohm, 47V, 0.5% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
303139-4K75-Q-B-T
Fixed Resistor, Metal Foil, 0.25W, 4750ohm, 47V, 0.02% +/-Tol, -.2,.2ppm/Cel, 2412
VISHAY
©2020 ICPDF网 联系我们和版权申明