232214357 [VISHAY]
RESISTOR, METAL ALLOY, 0.25 W, 0.1 %, 5 ppm, 10 ohm - 1000000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;
| 型号： | 232214357 |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, METAL ALLOY, 0.25 W, 0.1 %, 5 ppm, 10 ohm - 1000000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器 |
| 文件： | 总7页 (文件大小：298K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MPR24
Vishay BCcomponents
High Precision Leaded Resistors
FEATURES
• High precision resistors
(TCR up to 5 ppm/K, 0.01 % tol.)
• High stability (0.05 %)
• Low temperature coefficient (up to 5 ppm/K)
• Lead (Pb)-free solder contacts
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
DESCRIPTION
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
A homogenous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper are welded to the end-caps. The resistors are coated
with lacquer which provides electrical, mechanical, and
climatic protection.
APPLICATIONS
• Test and measurement
• Telecom
TECHNICAL SPECIFICATIONS
DESCRIPTION
MPR24
CECC Size, DIN Size
B, 0207
Resistance Range
10 Ω to 1 MΩ
Resistance Tolerance
0.05 %; 0.02 %; 0.01 %
0.5 %; 0.25 %; 0.1 %
Temperature Coefficient
Climatic Category (LCT/UCT/Days)
Max. Rated Dissipation, P70
Operating Voltage, Umax. AC/DC
Film Temperature
25 ppm/K; 15 ppm/K; 10 ppm/K; 05 ppm/K
55/125/56
0.125 W
55/155/56
0.25 W
250 V
125 °C
155 °C
Max. Resistance Change for Resistance Range,
ΔR max., After:
Load
Climatic Tests
(0.05 % R + 0.01 Ω)
(0.05 % R + 0.01 Ω)
(0.01 % R + 0.01 Ω)
(0.01 % R + 0.01 Ω)
Soldering
Short Time Overload
Permissible Voltage Against Ambient :
1 Min; Uins
500 V
75 V
Continuous
Failure Rate
≤ 0.3 x 10- 9/h
www.vishay.com
80
For technical questions, contact: filmresistors.leaded@vishay.com
Document Number: 28727
Revision: 10-Mar-08
MPR24
High Precision Leaded Resistors
Vishay BCcomponents
12NC INFORMATION
Components may be ordered by using either a simple clear
text ordering code, see “Type Description and Ordering
Code” or Vishay BCcomponents’ unique 12NC.
• The remaining 3 digits indicate the resistance value. The
number is available upon request and is fixed by the
supplier.
• The resistors have a 12-digit numeric code starting with
12NC Example
2322 14.
The 12NC of an MPR24 resistor with tolerance of 0.02 %
and TCR 05 ppm/K, taped on bandolier in box of 100 units
starts with 2322 141 77...; the last 3 digits are available upon
request and are fixed by the supplier.
• The subsequent 3 digits indicate the resistor type,
specification and packaging; see the 12NC table.
12NC - resistor type and packaging
ORDERING CODE 2322 14. .....
DESCRIPTION
BANDOLIER IN BOX
BANDOLIER IN BOX
1000 units
1 10...
BANDOLIER ON REEL
TYPE
TCR
TOL.
100 units
1 00...
1 20...
1 40...
1 64...
1 74...
1 84...
1 05...
1 25...
1 45...
1 65...
1 75...
1 85...
1 06...
1 26...
1 46...
1 66...
1 76...
1 86...
1 07...
1 27...
1 47...
1 67...
1 77...
1 87...
5000 units
0.5 %
3 10...
0.25 %
0.1 %
1 30...
3 30...
1 50...
3 50...
25 ppm/K
0.05 %
0.02 %
0.01 %
0.5 %
3 64...
-
3 74...
-
3 84...
-
1 15...
3 15...
0.25 %
0.1 %
1 35...
3 35...
1 55...
3 55...
15 ppm/K
10 ppm/K
5 ppm/K
0.05 %
0.02 %
0.01 %
0.5 %
3 65...
-
3 75...
-
3 85...
-
MPR24
1 16...
3 16...
0.25 %
0.1 %
1 36...
3 36...
1 56...
3 56...
0.05 %
0.02 %
0.01 %
0.5 %
3 66...
-
3 76...
-
3 86...
-
1 17...
3 17...
0.25 %
0.1 %
1 37...
3 37...
1 57...
3 57...
0.05 %
0.02 %
0.01 %
3 67...
-
-
-
3 77...
3 87...
Document Number: 28727
Revision: 10-Mar-08
For technical questions, contact: filmresistors.leaded@vishay.com
www.vishay.com
81
MPR24
High Precision Leaded Resistors
Vishay BCcomponents
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MPR24000E1001DC100
M
P
R
2
4
0
0
0
E
1
0
0
1
D
C
1
0
0
PACKAGING (1)
MODEL/SIZE
SPECIAL CHARACTER
TCR
VALUE
TOLERANCE
SPECIAL
MPR2400
0 = Neutral
Z = 5 ppm/K
Y = 10 ppm/K
X = 15 ppm/K
E = 25 ppm/K
3 digit value
T = 0.01 %
H = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
RP
CU
C1
Up to 2 digits
00 = Standard
1 digit multiplier
MULTIPLIER
9 = *10-1 2 = *102
0 = *100 3 = *103
1 = *101 4 = *104
PRODUCT DESCRIPTION: MPR24 - 25 0.5 % C1 1K0
MPR24
25
0.5 %
C1
1K0
PACKAGING (1)
RESISTANCE VALUE
MODEL/SIZE
TCR
TOLERANCE
MPR24
Z = 5 ppm
Y = 10 ppm
X = 15 ppm
E = 25 ppm
0.01 %
0.02 %
0.05 %
0.1 %
RP
CU
C1
1K0 = 1 kΩ
50R5 = 50.5 Ω
0.25 %
0.5 %
Notes:
(1) Please refer to table PACKAGING for complete information
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
DIMENSIONS
D
L
M
I
I
d
DIMENSIONS - leaded resistor types, mass and relevant physical dimensions
Dmax.
(mm)
Lmax.
(mm)
dnom.
(mm)
Imin.
(mm)
Mmin.
(mm)
MASS
(mg)
TYPE
MPR 24
2.5
6.3
0.6
28.0
7.5
220
SCRIPT MARKING (2)
TEMPERATURE COEFFICIENT AND TOLERANCE - printed resistance value and letter coding
RESISTANCE
VALUE
TOL.
(%)
LETTER
CODE
TCR
(ppm/K)
LETTER
CODE
0.5
0.25
0.1
D
C
B
A
P
T
25
15
10
05
-
E
F
B
A
-
Clear text code for value
0.05
0.02
0.01
-
-
Note:
(2) Resistors of TCR 25 ppm/K in combination with tolerances 0.5 %, 0.25 % and 0.1 % are only available with color coding in accordance
with IEC 60062
.
www.vishay.com
82
For technical questions, contact: filmresistors.leaded@vishay.com
Document Number: 28727
Revision: 10-Mar-08
MPR24
High Precision Leaded Resistors
Vishay BCcomponents
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
RESISTANCE VALUE (2)
MPR24
DESCRIPTION
TCR (1)
TOLERANCE
0.5 %
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
24 Ω to 100 kΩ
0.25 %
0.1 %
25 ppm/K
0.05 %
0.02 %
0.01 %
0.5 %
0.25 %
0.1 %
15 ppm/K
10 ppm/K
5 ppm/K
0.05 %
0.02 %
0.01 %
0.5 %
0.25 %
0.1 %
0.05 %
0.02 %
0.01 %
0.5 %
0.25 %
0.1 %
0.05 %
0.02 %
0.01 %
Notes:
(1) The temperature coefficient is specified over the temperature range + 20 °C to + 70 °C.
(2) Resistance values to be selected from E192 series, for other values please contact the factory.
PACKAGING
REEL
BOX
MODEL
PIECES/REEL
CODE
PIECES/BOX
CODE
100
1000
CU
C1
MPR24
5000
RP
FUNCTIONAL PERFORMANCE
P
– 0.5 %; – 0.25 %; – 0.1 %
– 0.05 %; – 0.02 %; – 0.01 %
0.2
W
••
0.1
0
C
- 50
0
50
70
100
150
Ambient Temperature
ϑamb
Derating - Depending on Resistance Tolerances
Document Number: 28727
Revision: 10-Mar-08
For technical questions, contact: filmresistors.leaded@vishay.com
www.vishay.com
83
MPR24
High Precision Leaded Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid.
EN 140000/IEC 60115-1, Generic specification (includes
tests)
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 140100/IEC 60115-2, Sectional specification (includes
schedule for qualification approval)
CECC 40101-806, Detail specification (includes schedule for
conformance inspection)
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
Most of the components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
For testing the components are mounted on a test board in
accordance with IEC 60115-1, 4.31 unless otherwise
specified.
In the Test Procedures and Requirements table only the
tests and requirements are listed with reference to the
relevant clauses of IEC 60115-1 and IEC 60068-2; a short
description of the test procedure is also given.
The tests are carried out in accordance with IEC 60 068 and
under standard atmospheric conditions in accordance with
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
METHOD
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
Stability for product
types:
4.99 Ω to < 24 Ω;
24 Ω to 100 kΩ
> 100 kΩ to 1 MΩ
4.5
0.5 %; 0.25 %; 0.1 %;
0.5 %; 0.25 %; 0.1 %
0.05 %; 0.02 %; 0.01 %
resistance
(ΔR/R)
-
-
-
4.8.4.2
at 20/70/20 °C
25 ppm/K; 15 ppm/K; 10 ppm/K; 05 ppm/K
25 ppm/K
temperature
coefficient
at 20/LCT/20 °C and
20/UCT/20 °C
4.25.1
U = P70 x R or
endurance at
U = Umax.
;
-
1.5 h ON;
0.5 h OFF
70 °C
70 °C; 2000 h
(0.05 % R + 0.01 Ω)
(0.05 % R + 0.01 Ω)
4.24
4.23
damp heat,
steady state
(40 2) °C; 56 days;
78 (Cab)
(93 3) % RH
climatic
sequence:
4.23.2
4.23.3
2 (Ba)
dry heat
125 °C; 16 h
55 °C; 24 h;
90 % to 100 % RH;
1 cycle
damp heat,
cyclic
30 (Db)
www.vishay.com
84
For technical questions, contact: filmresistors.leaded@vishay.com
Document Number: 28727
Revision: 10-Mar-08
MPR24
High Precision Leaded Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
METHOD
Stability for product
types:
4.99 Ω to < 24 Ω;
> 100 kΩ to 1 MΩ
24 Ω to 100 kΩ
4.23.4
4.23.5
1 (Aa)
13 (M)
cold
- 55 °C; 2 h
8.5 kPa; 2 h;
low air pressure
15 °C to 35 °C
4.23.6
4.13
55 °C; 5 days;
95 % to 100 % RH;
5 cycles
damp heat,
cyclic
(0.05 % R + 0.01 Ω)
30 (Db)
no visible damage
Room temperature;
short time
overload
(0.01 % R + 0.01 Ω)
U = 2.5 x P70 x R or
-
U = 2 x Umax.
;
no visible damage
5 s
4.19
rapid change of
temperature
30 min at LCT and
(0.01 % R + 0.01 Ω)
14 (Na)
45 (XA)
20 (Tb)
30 min at UCT; 5 cycles
no visible damage
4.29
component
solvent
Isopropyl alcohol
+ 23 °C; toothbrush
method
marking legible;
no visible damage
resistance
4.18.2
unmounted
components;
(260 5) °C;
(10 1) s
resistance to
(0.01 % R + 0.01 Ω)
soldering heat
no visible damage
4.17
4.22
4.16
+ 235 °C; 2 s
20 (Ta)
6 (B4)
solderability
vibration
good tinning (≥ 95 % coverage);
solder bath method
6 h;
(0.01 % R + 0.01 Ω);
10 Hz to 2000 Hz
1.5 mm or 196 m/s2
no visible damage
21 (Ua1)
21 (Ub)
21 (Uc)
robustness of
terminations
tensile, bending and
torsion
(0.01 % R + 0.01 Ω);
no visible damage
URMS = Uins
;
4.7
-
voltage proof
noise
no flashover or breakdown
60 s
4.12
IEC 60 195:
R ≤ 100 kΩ
R > 100 kΩ
-
max. 0.25 µV/V
max. 0.5 µV/V
Document Number: 28727
Revision: 10-Mar-08
For technical questions, contact: filmresistors.leaded@vishay.com
www.vishay.com
85
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明