231290775119 [VISHAY]
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 51.1 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;型号: | 231290775119 |
厂家: | VISHAY |
描述: | RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 51.1 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器 |
文件: | 总11页 (文件大小:157K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Vishay Beyschlag
Precision Thin Film Leaded Resistors
FEATURES
• Approved according to EN 140101-806
• Advanced thin film technology
• Low TCR: 15 ppm/K to 25 ppm/K
• Precision tolerance of value:
0.1 ꢀ and 0.25 ꢀ
• Superior overall stability: Class 0.05
• Wide precision range: 10 Ω to 1.5 MΩ
• Lead (Pb)-free solder contacts
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207 and MBE/SMA 0414
precision leaded thin film resistors combine the proven
reliability of the professional products with an advanced level
of precision and stability. Therefore they are perfectly suited
for applications in the fields of test and measuring equipment
along with industrial and medical electronics.
APPLICATIONS
• Test and measuring equipment
• Industrial electronics
• Medical electronics
METRIC SIZE
DIN
0204
0207
B
0414
D
CECC
A
TECHNICAL SPECIFICATIONS
DESCRIPTION
MBA/SMA 0204
A
MBB/SMA 0207
B
MBE/SMA 0414
CECC Size
D
Resistance Range
22 Ω to 332 kΩ; 0 Ω
10 Ω to 1 MΩ
0.25 ꢀ; 0.1 ꢀ
22 Ω to 1.5 MΩ
Resistance Tolerance
Temperature Coefficient
Operation Mode
25 ppm/K; 15 ppm/K
Precision
Standard
55/125/56
0.25 W
Precision
Standard
55/125/56
0.40 W
Precision
Standard
55/125/56
0.65 W
Climatic Category (LCT/UCT/Days)
Rated Dissipation, P70
Operating Voltage, Umax. AC/DC
Film Temperature
10/85/56
0.07 W
10/85/56
0.11 W
10/85/56
0.17 W
200 V
350 V
500 V
85 °C
125 °C
85 °C
125 °C
85 °C
125 °C
Max. Resistance Change at P70 for
Resistance Range, ΔR/R max., After:
100 Ω to 100 kΩ
100 Ω to 270 kΩ
100 Ω to 470 kΩ
1000 h
≤ 0.05 ꢀ
≤ 0.25 ꢀ
≤ 0.5 ꢀ
≤ 1.5 ꢀ
≤ 0.03 ꢀ
≤ 0.15 ꢀ
≤ 0.5 ꢀ
≤ 1.5 ꢀ
≤ 0.05 ꢀ
≤ 0.25 ꢀ
≤ 0.5 ꢀ
≤ 1.5 ꢀ
8000 h
≤ 0.1 ꢀ
≤ 0.3 ꢀ
≤ 0.1 ꢀ
≤ 0.3 ꢀ
≤ 0.1 ꢀ
≤ 0.3 ꢀ
225 000 h
Permissible Voltage Against Ambient
(Insulation):
1 Minute; Uins
Continuous
300 V
75 V
500 V
75 V
800 V
75 V
Failure Rate: FITobserved
≤ 0.1 x 10-9/h
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
www.vishay.com
72
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28767
Revision: 26-Jul-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION - CECC APPROVED PRODUCTS (1)
PART NUMBER: MBB0207VD1001BCT00
M
B
B
0
2
0
7
V
D
1
0
0
1
B
C
T
0
0
PACKAGING (2)
MODEL/SIZE
VARIANT
TCR/MATERIAL
VALUE
TOLERANCE
SPECIAL
MBA0204 =
V = CECC 06
N = RB Radial
5 mm for
E = 15 ppm/K
D = 25 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
B = 0.1 ꢀ
C = 0.25 ꢀ
CT
C1
RP
R2
N4
00 = Standard
MBA/SMA 0204
MBB0207 =
L0 = Welding joint
not lacquered for
MBB/SMA 0207
KL = Lacquered
welding joint for
MBA/SMA 0204
MBB/SMA 0207
MBE0414 =
MBE/SMA 0414
MBB/SMA0207
S = UB Radial
2.5 mm for
8 = *10-2 2 = *102
9 = *10-1 3 = *103
0 = *100 4 = *104
1 = *101 5 = *105
MBB/SMA0207
PRODUCT DESCRIPTION: MBB/SMA 0207-25 0.1 % CECC 06 CT 1K0
MBB/SMA 0207
-
25
0.1 %
CECC 06
CT
1K0
VARIANT
PACKAGING (2)
MODEL/SIZE
TCR
TOLERANCE
RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
15 ppm/K
25 ppm/K
0.1 ꢀ
0.25 ꢀ
CECC 06
CECC 06 L0
CECC 06 KL
CT
C1
RP
R2
N4
1K0 = 1 kΩ
51R1 = 51.1 Ω
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC APPROVED PRODUCTS (1)
RESISTANCE VALUE (3)
MBB/SMA 0207 (4)
10 Ω to 1 MΩ
DESCRIPTION
TCR
TOLERANCE
MBA/SMA 0204
22 Ω to 332 kΩ
43 Ω to 332 kΩ
22 Ω to 221 kΩ
43 Ω to 221 kΩ
MBE/SMA 0414
22 Ω to 1.5 MΩ
43 Ω to 1 MΩ
22 Ω to 1 MΩ
43 Ω to 1 MΩ
0.25 ꢀ
0.1 ꢀ
25 ppm/K
10 Ω to 1 MΩ
0.25 ꢀ
0.1 ꢀ
10 Ω to 1 MΩ
15 ppm/K
10 Ω to 1 MΩ
Notes
(1) Approval is according to EN 140101-806, version A
(2) Please refer to table PACKAGING for complete information
(3) Resistance values to be selected from E96 and E192 series, for other values please contact factory
(4) MBB/SMA 0207: Ohmic range 10 ≤ R < 22R for 0.25 ꢀ tolerance and 10 ≤ R < 43R for 0.1 ꢀ tolerance can not be qualified according to CECC
so these can only be ordered with variant = 0
•
•
•
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability
The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products
Radial version (RB, UB) can not be qualified according to CECC so these can only be ordered with variant N or S
Document Number: 28767
Revision: 26-Jul-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
73
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
PACKAGING - Axial products
REEL
BOX
TAPING ACC. IEC 60286-1
TAPING ACC. IEC 60286-1
MODEL
PIECES
CODE
PIECES
CODE
1000
5000
C1
CT
MBA/SMA 0204
5000
RP
1000
5000
C1
CT
MBB/SMA 0207
MBE/SMA 0414
5000
2500
RP
R2
1000
C1
DIMENSIONS
L
D
I
I
M
d
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions
Dmax.
(mm)
Lmax.
(mm)
dnom.
(mm)
Imin.
(mm)
Mmin.
(mm)
MASS
(mg)
TYPE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
1.6
2.5
4.0
3.6
6.3
0.5
0.6
0.8
29.0
28.0
31.0
5.0
125
220
700
10.0 (1)
15.0
11.9
Note
(1) For 7.5 ≤ M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered)
www.vishay.com
74
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28767
Revision: 26-Jul-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
PACKAGING - Radial products
REEL
BOX
TAPING ACC. IEC 60286-2
TAPING ACC. IEC 60286-2
MODEL
PIECES
CODE
PIECES
CODE
MBB/SMA 0207 RB
MBB/SMA 0207 UB
4000
R4
4000
N4
MBB/SMA 0207 WITH RADIAL TAPING
LEAD SPACING (UB = 2.5 mm), SIZE 0207
DIMENSIONS in millimeters
Pitch of components
Lead spacing
P
P
F
12.7 1.0
2.5 + 0.6, - 0.1
18.0 + 1.0, - 0.5
18.0 2.0
11
Insulated
C
Width of carrier tape
Body to hole center
Height for cutting (max.)
Height for bending
W
H
3 max.
H1
F
H
L
L
W
C
2.5 + 0, - 0.5
32
Direction of unreeling
Height for insertion (max.)
H1
LEAD SPACING (RB = 5.0 mm), SIZE 0207
DIMENSIONS in millimeters
Pitch of components
Lead spacing
P
F
12.7 1.0
5.0 + 0.6, - 0.1
18.0 + 1.0, - 0.5
18.0 2.0
P
Insulated
C
Width of carrier tape
Body to hole center
W
H
3 max.
H1
H
F
H0
L
W
Lead crimp to hole
center
H0
16.0 0.5
Direction of unreeling
Height for cutting (max.)
Height for bending
L
C
11
2.5 + 0, - 0.5
32
Height for insertion (max.)
H1
Document Number: 28767
Revision: 26-Jul-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
75
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
• 2000/53/EC End of Vehicle Life Directive (ELV) and
Annex II (ELVII)
DESCRIPTION
Production is strictly controlled and follows an extensive
• 2002/95/EC Restriction of the use of Hazardous
set of instructions established for reproducibility.
A
Substances Directive (RoHS)
homogeneous film of metal alloy is deposited on a high grade
ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
A further conditioning is applied in order to stabilise the
trimming result. Connecting wires of electrolytic copper
plated with 100 pure tin are welded to the termination caps.
The resistors are covered by protective coating designed for
electrical, mechanical and climatic protection.The
terminations receive a final pure tin on nickel plating. Four or
five color code rings designate the resistance value and
tolerance in accordance with IEC 60062.
• 2002/96/EC Waste Electrical and Electrical Equipment
Directive (WEEE)
APPROVALS
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification EN 140101-806 which refers to EN 60115-1
and EN 140100 and the variety of environmental test
procedures of the IEC 60068 series.
Conformity is attested by the use of the CECC logo ( ) as
the Mark of Conformity on the package label for the CECC
version.
The result of the determined production is verified by an
extensive testing procedure performed on 100 of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1 or for the radial versions in accordance to
IEC 60286-2.
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
ASSEMBLY
RELATED PRODUCTS
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping.
This product family of leaded thin film resistors for
professional applications is complemented by Zero Ohm
Jumpers.
For a corelated range of precision TCR and tolerance
specifications see the datasheet:
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
• “Professional Thin Film Leaded Resistors”, document no.
28766
For products approved to EN 140101-806, version E, with
established reliability and failure rate level E7 (Quality factor
πQ = 0.1), see the datasheet:
The encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system.
• “Established Reliability Thin Film Leaded Resistors”,
document no. 28768
(1)
All products comply with GADSL
CEFIC-EECA-EICTA
and the
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
Notes
(2)
Global Automotive Declarable Substance List, see www.gadsl.org
(3)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade organisation representing the information and communications technology and consumer electronics), see
www.eicta.org/index.php?id=1053&id_article=340
www.vishay.com
76
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28767
Revision: 26-Jul-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
P
1
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
W
0.5
0
50
- 50
0
100
150
70
°C
Ambient Temperature
ϑ amb
Derating - Long Term Operation
P
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0.2
W
0.1
0
50
- 50
0
100
C
150
ϑ amb
70
Ambient Temperature
Derating - Precision Operation
T
60
K
40
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
20
0
0
0.4
0.6
0.1
0.2
0.3
0.5
0.7
0.8
Load
W
P
Rise of the surface temperature.
Temperature Rise
Document Number: 28767
Revision: 26-Jul-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
77
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
A
1
µV/V
0.1
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0.01
100
1K
10K
100K
1M
10M
Resistance Value
Ω
R
Current Noise A1 in accordance with IEC 60195
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
temperature, upper category temperature; damp heat,
steady state, test duration: 56 days) is valid.
EN 60115-1, Generic specification (includes tests)
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 140100, Sectional specification (includes schedule for
qualification approval)
Relative humidity: 45 ꢀ to 75 ꢀ
EN 140101-806 (successor of CECC 40101-806), Detail
specification (includes schedule for conformance inspection)
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For testing the components are mounted on a test board in
accordance with IEC 60115-1, 4.31 unless otherwise
specified.
Most of the components are approved in accordance with the
European CECC-system, where applicable. The Test
Procedures and Requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above. The testing also covers most of the
requirements specified by EIA/IS-703 and JIS-C-5202.
In the Test Procedures and Requirements table, only the
tests and requirements are listed with reference to the
relevant clauses of IEC 60115-1 and IEC 60068-2-xx test
methods. A short description of the test procedure is also
given.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3. Climatic category
LCT/UCT/56 (rated temperature range: Lower category
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-
TEST
METHOD
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR max.)
TEST
PROCEDURE
STABILITY
CLASS 0.05
STABILITY
CLASS 0.1
STABILITY
CLASS 0.25
Stability for product types:
MBA/SMA 0204
43 Ω to < 100 Ω;
> 100 Ω to 221 kΩ
100 Ω to 100 kΩ
100 Ω to 270 kΩ
100 Ω to 470 kΩ
22 Ω to 332 kΩ
22 Ω to 1 MΩ
22 Ω to 1.5 MΩ
43 Ω to < 100 Ω;
> 270 kΩ to 510 kΩ
MBB/SMA 0207
43 Ω to <100 Ω;
> 470 kΩ to 1 MΩ
MBE/SMA 0414
4.5
4.8
-
-
Resistance
-
0.25 ꢀ; 0.1 ꢀ
Temperature
coefficient
At 20/LCT/20 °C and
20/UCT/20 °C
25 ppm/K; 15 ppm/K
www.vishay.com
78
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28767
Revision: 26-Jul-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-
TEST
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR max.)
TEST
PROCEDURE
METHOD
STABILITY
CLASS 0.05
STABILITY
CLASS 0.1
STABILITY
CLASS 0.25
Stability for product types:
MBA/SMA 0204
43 Ω to < 100 Ω;
> 100 Ω to 221 kΩ
100 Ω to 100 kΩ
100 Ω to 270 kΩ
100 Ω to 470 kΩ
22 Ω to 332 kΩ
22 Ω to 1 MΩ
22 Ω to 1.5 MΩ
43 Ω to < 100 Ω;
> 270 kΩ to 510 kΩ
MBB/SMA 0207
43 Ω to <100 Ω;
> 470 kΩ to 1 MΩ
MBE/SMA 0414
Endurance
at 70 °C:
Precision
operation
mode
U = P70 x R or
U = Umax.
;
-
1.5 h ON; 0.5 h OFF
70 °C; 1000 h
(0.05 ꢀ R + 0.01 Ω) (1)
(0.1 ꢀ R + 0.01 Ω)
(0.1 ꢀ R + 0.01 Ω)
(0.2 ꢀ R + 0.01 Ω)
(0.25 ꢀ R + 0.05 Ω) (2)
(0.5 ꢀ R + 0.05 Ω)
4.25.1
70 °C; 8000 h
U = P70 x R or
Endurance
at 70 °C:
Standard
operation
mode
U = Umax.
;
1.5 h ON; 0.5 h OFF
-
70 °C; 1000 h
(0.25 ꢀ R + 0.05 Ω) (2)
(0.5 ꢀ R + 0.05 Ω)
-
-
-
-
70 °C; 8000 h
(40 2) °C;
56 days;
(93 3) ꢀ RH
Damp heat,
steady state
4.24
78 (Cab)
(0.05 ꢀ R +0.01 Ω)
(0.1 ꢀ R + 0.01 Ω)
(0.25 ꢀ R + 0.05 Ω)
Climatic
sequence:
4.23
4.23.2
2 (Ba)
Dry heat
125 °C; 16 h
55 °C; 24 h;
90 ꢀ to 100 ꢀ RH;
1 cycle
Damp heat,
cyclic
4.23.3
30 (Db)
4.23.4
4.23.5
1 (Aa)
13 (M)
Cold
- 55 °C; 2 h
Low air
pressure
8.5 kPa; 2 h;
15 °C to 35 °C
55 °C; 5 days;
95 ꢀ to 100 ꢀ RH;
5 cycles
Damp heat,
cyclic
(0.05 ꢀ R + 0.01 Ω)
no visible damage
(0.1 ꢀ R + 0.01 Ω)
no visible damage
(0.25 ꢀ R + 0.05 Ω)
no visible damage
4.23.6
4.13
30 (Db)
Room temperature;
U = 2.5 x P70 x R or
U = 2 x Umax.; 5 s
Short time
overload
(0.01 ꢀ R + 0.01 Ω)
no visible damage
(0.02 ꢀ R + 0.01 Ω)
no visible damage
(0.05 ꢀ R + 0.01 Ω)
no visible damage
−
30 min at LCT = - 55 °C
30 min at UCT = 125 °C
Rapid
change of
temperature
(0.01 ꢀ R + 0.01 Ω)
no visible damage
(0.02 ꢀ R + 0.01 Ω)
no visible damage
(0.05 ꢀ R + 0.01 Ω)
no visible damage
5 cycles
4.19
14 (Na)
MBA/SMA 0204: 500 cycles
MBB/SMA 0207: 200 cycles
MBE/SMA 0414: 100 cycles
(0.25 ꢀ R + 0.05 Ω)
no visible damage
(0.25 ꢀ R + 0.05 Ω)
no visible damage
(0.25 ꢀ R + 0.05 Ω)
no visible damage
Document Number: 28767
Revision: 26-Jul-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
79
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-
TEST
IEC
60115-1
CLAUSE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR max.)
TEST
PROCEDURE
METHOD
STABILITY
CLASS 0.05
STABILITY
CLASS 0.1
STABILITY
CLASS 0.25
Stability for product types:
MBA/SMA 0204
43 Ω to < 100 Ω;
> 100 Ω to 221 kΩ
100 Ω to 100 kΩ
100 Ω to 270 kΩ
100 Ω to 470 kΩ
22 Ω to 332 kΩ
22 Ω to 1 MΩ
22 Ω to 1.5 MΩ
43 Ω to < 100 Ω;
> 270 kΩ to 510 kΩ
MBB/SMA 0207
43 Ω to <100 Ω;
> 470 kΩ to 1 MΩ
MBE/SMA 0414
Component
solvent
resistance
Isopropyl alcohol
+ 23 °C; toothbrush method
Marking legible;
No visible damage
4.29
45 (XA)
20 (Tb)
Unmounted components;
(260 3) °C;
Resistance to
soldering heat
(0.01 ꢀ R + 0.01 Ω)
no visible damage
(0.02 ꢀ R + 0.01 Ω)
no visible damage
(0.05 ꢀ R + 0.01 Ω)
no visible damage
4.18.2
(10 1) s
+ 235 °C; 2 s
solder bath method;
SnPb40
4.17
4.22
20 (Ta)
Solderability
Good tinning (≥ 95 ꢀ covered, no visible damage)
+ 245 °C; 3 s
solder bath method;
SnAg3Cu0.5
6 h;
6 (B4)
Vibration
10 Hz to 2000 Hz
1.5 mm or 196 m/s2
(0.01 ꢀ R + 0.01 Ω)
(0.02 ꢀ R + 0.01 Ω)
(0.05 ꢀ R + 0.01 Ω)
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
4.16
4.7
Tensile, bending and torsion
(0.01 ꢀ R + 0.01 Ω)
(0.02 ꢀ R + 0.01 Ω)
(0.05 ꢀ R + 0.01 Ω)
-
Voltage proof
URMS = Uins; 60 s
No flashover or breakdown
Endurance at
upper
category
85 °C; 1000 h
125 °C; 1000 h
-
-
-
4.25.3
4.40
-
(0.05 ꢀ R + 0.01 Ω)
(0.1 ꢀ R + 0.01 Ω)
(0.25 ꢀ R + 0.05 Ω)
temperature
IEC 61340-3-1;
3 pos. + 3 neg.
MBA/SMA 0204: 2 kV
MBB/SMA 0207: 4 kV
MBE/SMA 0414: 6 kV
Electrostatic
discharge
(human body
model)
-
(0.5 ꢀ R + 0.05 Ω)
Notes
(1)
(0.03 ꢀ R + 0.01 Ω) for MBB/SMA 0207
(0.15 ꢀ R + 0.05 Ω) for MBB/SMA 0207
(2)
www.vishay.com
80
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28767
Revision: 26-Jul-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
Precision Thin Film Leaded Resistors
Vishay Beyschlag
HISTORICAL 12NC INFORMATION
• The resistors had a 12-digit numeric code starting with
Resistance Decade
2312
RESISTANCE DECADE
10 Ω to 99.9 Ω
LAST DIGIT
• The subsequent 4 digits indicated the resistor type,
specification and packaging; see the 12NC table
9
1
2
3
4
5
100 Ω to 999 Ω
• The remaining 4 digits indicated the resistance value:
1 kΩ to 9.99 kΩ
- The first 3 digits indicated the resistance value
10 kΩ to 99.9 kΩ
100 kΩ to 999 kΩ
1 MΩ to 9.99 MΩ
- The last digit indicated the resistance decade in
accordance with resistance decade table shown below
Historical 12NC Example
The 12NC code of a MBA 0204 resistor, value 47 kΩ and
TCR 25 with 0.1 ꢀ tolerance, supplied on bandolier in a
box of 5000 units was: 2312 906 74703.
HISTORICAL 12NC - Resistor type and packaging
2312 ... ..... (BANDOLIER)
REEL
DESCRIPTION
AMMOPACK
TYPE
TCR
TOL.
C1 1000 units
901 6....
901 7....
902 6....
902 7....
911 6....
911 7....
912 6....
912 7....
921 6....
921 7....
922 6....
922 7....
CT 5000 units
906 6....
906 7....
907 6....
907 7....
916 6....
916 7....
917 6....
917 7....
-
R1 1000 units
701 6....
701 7....
702 6....
702 7....
711 6....
711 7....
712 6....
712 7....
-
R2 2500 units
RP 5000 units
806 6....
806 7....
807 6....
807 7....
816 6....
816 7....
817 6....
817 7....
-
0.25 ꢀ
0.1 ꢀ
0.25 ꢀ
0.1 ꢀ
0.25 ꢀ
0.1 ꢀ
0.25 ꢀ
0.1 ꢀ
0.25 ꢀ
0.1 ꢀ
0.25 ꢀ
0.1 ꢀ
-
25 ppm/K
-
MBA 0204
-
15 ppm/K
25 ppm/K
15 ppm/K
25 ppm/K
15 ppm/K
-
-
-
MBB 0207
MBE 0414
-
-
826 6....
826 7....
827 6....
827 7....
-
-
-
-
-
-
-
-
-
Document Number: 28767
Revision: 26-Jul-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
81
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
231290775179
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 51.7 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290775839
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 58.3 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776041
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 604 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776129
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 61.2 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776262
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 6260 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776343
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 63400 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776349
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 63.4 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776492
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 6490 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776572
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 6570 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776731
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 673 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776732
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 6730 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
231290776819
RESISTOR, THIN FILM, 0.25 W, 0.1 %, 15 ppm, 68.1 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明