225P [VISHAY]

Polyester Capacitors Filmite® “E”, ORANGE DROP®, Radial Lead; 涤纶电容器Filmite® “E” , ORANGE DROP® ,径向引线
225P
型号: 225P
厂家: VISHAY    VISHAY
描述:

Polyester Capacitors Filmite® “E”, ORANGE DROP®, Radial Lead
涤纶电容器Filmite® “E” , ORANGE DROP® ,径向引线

电容器
文件: 总5页 (文件大小:97K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Type 225P  
Vishay Sprague  
Polyester Capacitors  
Filmite® “E”, ORANGE DROP®, Radial Lead  
FEATURES  
Utilizes minimum area where printed wiring  
board space is most important  
Wound from PETP polyester film and thin gauge  
foil under carefully controlled atmospheric  
conditions  
RoHS  
COMPLIANT  
Protected against moisture by a conformal coating of  
epoxy  
Specifically designed for printed wiring board applications  
Widely used in computers, instrumentation and  
telecommunications equipment  
100 VDC through 600 VDC, may be operated up to  
+ 125 °C with proper dearting  
PERFORMANCE CHARACTERISTICS  
Operating Temperature: - 55 °C to + 85 °C  
To + 105 °C when working voltage is reduced to 70 % of  
+ 85 °C rating; to + 125 °C when working voltage is reduced  
to 50 % of 85 °C rating  
Dielectric Withstanding Voltage:  
Capacitors shall withstand a DC potential of 250 % of rated  
voltage applied between terminals for not more than 5  
seconds. The test voltage must be applied and discharged  
through a resistor of 1 ohm per volt.  
Insulation Resistance: After a 2 minute charge at rated  
voltage or 500 V, whichever is less.  
Humidity Test:  
Condition capacitors with no voltage applied for 72 hours at  
95 % relative humidity and + 75 °C. Remove capacitors from  
humidity chamber, wipe surface dry of moisture and dry in  
circulating air for 4 hours. Measure insulation resistance after  
a 2 minute charge at 25 °C and rated voltage or 500 VDC,  
whichever is less. Minimum product of insulation resistance  
and capacitance shall be 5000 Megohm - Microfarads after  
test but need not exceed 10 000 Megohm. Not more than  
one failure allowed in 12 units tested.  
At + 25 °C: 100 000 Megohm for C 0.25 Microfarads  
25000 Megohm - Microfarads for C > 0.25 Microfarads  
At + 85 °C: 10 000 Megohm for C 0.15 Microfarads  
1500 Megohm - Microfarads for C > 0.15 Microfarads  
At + 105 °C: 1500 Megohm for C 0.17 Microfarads  
250 Megohm - Microfarads for C > 0.17 Microfarads  
At + 125 °C: 200 Megohm for C 0.13 Microfarads  
25 Megohm - Microfarads for C > 0.13 Microfarads  
Capacitance Tolerance and Dissipation Factor:  
Capacitors shall be measured at a frequency of 1000 Hz at  
+ 25 °C or else be referred to measurements made at that  
frequency and temperature. The maximum dissipation factor  
shall be 0.75 %  
DC Life Test:  
Capacitance are capable of withstanding a 500 hour life test  
at + 85 °C at 150 % of rated working voltage. After test,  
capacitance shall not have changed by more than 5 % of  
initial value, insulation resistance shall not have decreased  
by more than 50 % of the initial limit and dissipation factor  
shall not have increased to more than 1 %.  
DIMENSIONS in inches [millimeters]  
L
Max.  
L
Max.  
L
Max.  
T Max.  
H
Max.  
0.237  
"
0.237  
[6.020]  
Max.  
0.237  
[6.020]  
Max.  
[6.020]  
Max.  
Lead  
Length  
Lead  
Lead  
Length  
Length  
Tinned Copper-Clad Steel  
0.032 [0.8ꢀ3] Dia.  
(No. 20 AWG)  
S
S
S
0.030 [0.762]  
0.060 [ꢀ.52ꢁ]  
0.030 [0.762]  
Terminal A  
Terminal B  
Terminal D  
S
CASE  
L
CODE  
(Max.)  
Terminal A and B  
Terminal D  
0.375 [9.525]  
0.375 [9.525]  
0.719 [18.263]  
W
X
0.70 [17.78]  
0.80 [20.32]  
1.25 [31.75]  
0.562 [14.275]  
0.613 [15.570]  
0.969 [24.613]  
Y
Document Number: 42016  
Revision: 19-Feb-07  
For technical questions, contact: spresale@vishay.com  
www.vishay.com  
25  
Type 225P  
Polyester Capacitors  
Vishay Sprague  
Filmite® “E”, ORANGE DROP®, Radial Lead  
CAPACITANCE CHANGE  
DISSIPATION FACTOR VS.TEMPERATURE  
ꢀ.5  
ꢀ6  
ꢀꢁ  
ꢀ2  
ꢀ0  
8
CAPACITANCE CHANGE ENVELOPE  
FOR 96 % CONFIDENCE LEVEL  
ꢀ.0  
6
2
0
2
6
TYPICAL  
0.5  
0
- 55 - ꢁ0 - 25  
0
+ 25 + 50 + 75 + 85 + ꢀ05 + ꢀ25  
+ ꢀ00  
- 55 - ꢁ0 - 25  
- 50  
0
+ 25 + 50 + 75 + 85 + ꢀ05 + ꢀ25  
+ ꢀ00  
- 50  
TEMPERATURE DEG. CENTIGRADE  
TEMPERATURE DEG. CENTIGRADE  
STANDARD RATINGS*  
µF  
SIZE  
H
ꢀ0 % TOLERANCE  
PART NUMBER  
L
T
ꢀ00 VDC/70 VAC**  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.70 [17.78]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
0.001  
0.0012  
0.0015  
0.0018  
0.0022  
0.0027  
0.0033  
0.0039  
0.0047  
0.0056  
0.0068  
0.0082  
0.01  
0.012  
0.015  
0.018  
0.022  
0.027  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.1  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
225P10291W  
225P12291W  
225P15291W  
225P18291W  
225P22291W  
225P27291W  
225P33291W  
225P39291W  
225P47291W  
225P56291W  
225P68291W  
225P82291W  
225P10391W  
225P12391W  
225P15391W  
225P18391W  
225P22391W  
225P27391W  
225P33391W  
225P39391W  
225P47391W  
225P56391W  
225P68391W  
225P82391W  
225P10491W  
225P12491X  
225P15491X  
225P18491X  
225P22491X  
225P27491X  
225P33491X  
225P39491X  
225P47491X  
225P56491Y  
225P68491Y  
225P82491Y  
225P10591Y  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.35 [8.89]  
0.37 [9.40]  
0.37 [9.40]  
0.42 [10.67]  
0.42 [10.67]  
0.49 [12.45]  
0.49 [12.45]  
0.55 [13.97]  
0.55 [13.97]  
0.57 [14.48]  
0.62 [15.75]  
0.66 [16.76]  
0.70 [17.78]  
0.74 [18.80]  
0.77 [19.56]  
0.81 [20.57]  
0.86 [21.84]  
0.88 [22.35]  
0.90 [22.86]  
0.94 [23.88]  
0.98 [24.89]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.27 [6.86]  
0.27 [6.86]  
0.30 [7.62]  
0.30 [7.62]  
0.34 [8.64]  
0.34 [8.64]  
0.40 [10.16]  
0.40 [10.16]  
0.37 [9.40]  
0.40 [10.16]  
0.43 [10.92]  
0.46 [11.68]  
0.49 [12.45]  
0.52 [13.21]  
0.55 [13.97]  
0.60 [15.24]  
0.55 [13.97]  
0.58 [14.73]  
0.65 [16.51]  
0.72 [18.29]  
* Parts ordered with D3 leads are standard capacitors in stock and available through the Sprague® Distribution Network. For complete Part  
Number, add letter and number for terminal and lead length. See Ordering Information (Ex: 225P39391WD3).  
** 60 Hz rms  
www.vishay.com  
26  
For technical questions, contact: spresale@vishay.com  
Document Number: 42016  
Revision: 19-Feb-07  
Type 225P  
Polyester Capacitors  
Vishay Sprague  
Filmite® “E”, ORANGE DROP®, Radial Lead  
STANDARD RATINGS* in inches [millimeters]  
µF  
SIZE  
H
ꢀ0 % TOLERANCE  
PART NUMBER  
L
T
200 VDC/ꢀꢁ0 VAC**  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
1.25 [31.75]  
0.001  
0.0015  
0.0022  
0.0033  
0.0047  
0.0068  
0.01  
225P10292X  
225P15292X  
225P22292X  
225P33292X  
225P47292X  
225P68292X  
225P10392X  
225P15392X  
225P22392X  
225P33392X  
225P47392X  
225P68392X  
225P10492X  
225P10492Y  
225P15492X  
225P22492X  
225P33492Y  
225P47492Y  
225P68492Y  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.58 [14.73]  
0.58 [14.73]  
0.58 [14.73]  
0.58 [14.73]  
0.61 [15.49]  
0.61 [15.49]  
0.64 [16.26]  
0.71 [18.03]  
0.64 [16.26]  
0.74 [18.80]  
0.77 [19.56]  
0.71 [18.03]  
0.83 [21.08]  
1.14 [28.96]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.28 [7.11]  
0.28 [7.11]  
0.31 [7.87]  
0.37 [9.40]  
0.31 [7.87]  
0.41 [10.41]  
0.48 [12.19]  
0.41 [10.41]  
0.50 [12.70]  
0.84 [21.34]  
0.015  
0.022  
0.033  
0.047  
0.068  
0.1  
0.1  
0.15  
0.22  
0.33  
0.47  
0.68  
1.25 [31.75]  
ꢁ00 VDC/200 VAC**  
0.80 [20.32]  
0.001  
0.0015  
0.0022  
0.0033  
0.0047  
0.0068  
0.01  
225P10294X  
225P15294X  
225P22294X  
225P33294X  
225P47294X  
225P68294X  
225P10394X  
225P15394X  
225P22394X  
225P33394X  
225P47394X  
225P47394Y  
225P68394X  
225P10494X  
225P10494Y  
225P15494Y  
225P22494Y  
225P33494Y  
225P47494Y  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.58 [14.73]  
0.58 [14.73]  
0.58 [14.73]  
0.58 [14.73]  
0.65 [16.51]  
0.65 [16.51]  
0.64 [16.26]  
0.80 [20.32]  
0.84 [21.34]  
0.74 [18.80]  
0.80 [20.32]  
0.89 [22.61]  
0.99 [25.15]  
1.14 [28.96]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.28 [7.11]  
0.28 [7.11]  
0.31 [7.87]  
0.34 [8.64]  
0.41 [10.41]  
0.31 [7.87]  
0.47 [11.94]  
0.52 [13.21]  
0.41 [10.41]  
0.47 [11.94]  
0.56 [14. 22]  
0.72 [18.29]  
0.84 [21.34]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
0.015  
0.022  
0.033  
0.047  
0.047  
0.068  
0.1  
0.1  
0.15  
0.22  
0.33  
0.47  
*
Parts ordered with D3 leads are standard capacitors in stock and available through the Sprague® Distribution Network. For complete Part  
Number, add letter and number for terminal and lead length. See How to Order (Ex: 225P39391WD3).  
** 60 Hz rms  
Document Number: 42016  
Revision: 19-Feb-07  
For technical questions, contact: spresale@vishay.com  
www.vishay.com  
27  
Type 225P  
Polyester Capacitors  
Vishay Sprague  
Filmite® “E”, ORANGE DROP®, Radial Lead  
STANDARD RATINGS* in inches [millimeters]  
µF  
SIZE  
H
ꢀ0 % TOLERANCE  
PART NUMBER  
L
T
600 VDC/200 VAC**  
0.80 [20.32]  
0.001  
0.0015  
0.0022  
0.0033  
0.0047  
0.0068  
0.01  
225P10296X  
225P15296X  
225P22296X  
225P33296X  
225P47296X  
225P68296X  
225P10396X  
225P15396X  
225P18396X  
225P22396X  
225P33396X  
225P39396X  
225P47396X  
225P68396Y  
225P10496Y  
225P22496Y  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.55 [13.97]  
0.58 [14.73]  
0.58 [14.73]  
0.64 [16.26]  
0.67 [17.02]  
0.74 [18.80]  
0.74 [18.80]  
0.77 [19.56]  
0.83 [21.08]  
0.83 [21.08]  
0.82 [20.83]  
0.91 [23.11]  
1.10 [27.94]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.25 [6.35]  
0.31 [7.87]  
0.34 [8.64]  
0.37 [9.40]  
0.37 [9.40]  
0.44 [11.18]  
0.50 [12.70]  
0.50 [12.70]  
0.47 [11.94]  
0.56 [14.22]  
0.76 [19.30]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
0.80 [20.32]  
1.25 [31.75]  
1.25 [31.75]  
1.25 [31.75]  
0.015  
0.018  
0.022  
0.033  
0.039  
0.047  
0.068  
0.1  
0.22  
* Parts ordered with D3 leads are standard capacitors in stock and available through the Sprague® Distribution Network. For complete Part  
Number, add letter and number for terminal and lead length. See How to Order (Ex: 225P39391WD3).  
* 60 Hz rms  
ORDERING INFORMATION  
225P  
ꢀ0ꢁ  
9
W
D
3
(-XXX)  
TYPE  
CAPACITANCE  
TOLERANCE DC VOLTAGE  
RATING  
CASE CODE  
TERMINAL  
LEAD LENGTH  
SPECIAL  
CONSTRUCTION  
Capacitance is  
expressed in  
picofarads. The first  
two digits are  
significant. The third  
is the number of  
zeros to follow.  
Values must  
0 = 20 % This is  
See Dimensional A = Straight Lead  
1 = 0.187" 0.030" A three-digit suffix  
9 = 10 % expressed in Configurations.  
5 = 50 % hundred of  
volts.  
B = Hairpin Crimped [4.750 0.762] may be added by  
D = Hockey Crimped 2 = 0.250" 0.030" the factory to  
[6.350 0.762] denote special  
3 = 1.250” [31.750] construction.  
Minimum  
conform to Decade  
Rating for the  
tolerance specified.  
Note: Some Part Numbers are in stock and available through the Vishay Sprague® Distribution Network. Other Part Numbers are available on  
special order through Vishay Sprague® Distribution. In the construction of the components described, the full intent of the specification will be  
met. Vishay however, reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit  
improvements in the design of its products. The information included herein is believed to be accurate and reliable. However, Vishay Sprague®  
assumes no responsibility for its use nor for any infringements of patens of other rights of third parties which may result from its use.  
www.vishay.com  
28  
For technical questions, contact: spresale@vishay.com  
Document Number: 42016  
Revision: 19-Feb-07  
Legal Disclaimer Notice  
Vishay  
Notice  
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,  
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.  
Information contained herein is intended to provide a product description only. No license, express or implied, by  
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's  
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express  
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness  
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.  
Customers using or selling these products for use in such applications do so at their own risk and agree to fully  
indemnify Vishay for any damages resulting from such improper use or sale.  
Document Number: 91000  
Revision: 08-Apr-05  
www.vishay.com  
1

相关型号:

225P10201WD3

CAPACITOR, FILM/FOIL, POLYESTER, 100 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XA1

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XA2

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XA3

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XB1

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XB2

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XD2

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10202XD3

CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10251WA1

CAPACITOR, FILM/FOIL, POLYESTER, 100 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10251WA2

CAPACITOR, FILM/FOIL, POLYESTER, 100 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10251WA3

CAPACITOR, FILM/FOIL, POLYESTER, 100 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

225P10251WD2

CAPACITOR, FILM/FOIL, POLYESTER, 100 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY