1N756A-TAP [VISHAY]
Zener Diode, 8.2V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-35, GLASS PACKAGE-2;型号: | 1N756A-TAP |
厂家: | VISHAY |
描述: | Zener Diode, 8.2V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-35, GLASS PACKAGE-2 |
文件: | 总4页 (文件大小:111K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1N746A to 1N759A
VISHAY
Vishay Semiconductors
Small Signal Zener Diodes
Features
• Silicon Planar Power Zener Diodes.
• Standard Zener voltage tolerance is 5 % for "A"
suffix.
Mechanical Data
Case: DO-35 Glass Case
94 9367
Weight: approx. 125 mg
Packaging codes/options:
TR / 10 k per 13 " reel, 30 k/box
TAP / 10 k per Ammo tape (52 mm tape), 30 k/box
Absolute Maximum Ratings
T
= 25 °C, unless otherwise specified
Parameter
amb
Test condition
Symbol
Value
Unit
mW
Zenner current (see Table
"Characteristics")
1)
Power dissipation
T
= 75 °C
P
tot
amb
500
1)
T is measured that leads at a distance of 3/8 " from case are kept at ambient temperature
L
Thermal Characteristics
T
= 25 °C, unless otherwise specified
amb
Parameter
Test condition
Symbol
Value
Unit
1)
Thermal resistance junction to
ambient air
R
°C/W
thJA
300
Maximum junction temperature
Storage temperature range
T
175
°C
°C
j
T
- 65 to + 175
S
1)
Valid provided that leads at a distance of 3/8 " from case are kept at ambient temperature
Document Number 85756
Rev. 1.2, 15-Jul-03
www.vishay.com
1
1N746A to 1N759A
Vishay Semiconductors
VISHAY
Electrical Characteristics
Partnumber
Nominal Zener
Test Current
Maximum
Dynamic
Impedance
1)
Maximum
Regulator
Current
2)
Maximum Reverse Leakage Current
Voltage
I
@ V = 1 V
R
R
3)
I
T
= 25 °C
T = 150 °C
amb
V
@ I
ZT
Z
@ I
I
amb
Z
ZT
ZT
ZT
ZM
V
mA
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Ω
28
24
23
22
19
17
11
7
mA
µA
10
10
10
2
µA
30
30
30
30
30
20
20
20
20
20
20
20
20
20
1N746A
1N747A
1N748A
1N749A
1N750A
1N751A
1N752A
1N753A
1N754A
1N755A
1N756A
1N757A
1N758A
1N759A
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
110
100
95
85
75
70
65
60
55
50
45
40
35
30
2
1
1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
5
6
8
10
17
30
12
1)
The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of
the Zener current (I ) is superimposed on I .Zener impedance is measured at two points to insure a sharp knee on the breakdown curve
ZT
ZT
and to eliminate unstable units.
2)
Valid provided that leads at a distance of 3/8 " from case are kept at ambient temperature.
Measured with device junction in thermal equilibrium.
3)
Package Dimensions in mm (Inches)
Cathode Identification
∅ 0.55 (0.02) max.
ISO Method E
∅ 2.0 (0.08) max.
94 9366
Standard Glass Case
54 A 2 DIN 41880
JEDEC DO 35
26 (1.02) min.
3.9 (0.15) max.
26 (1.02) min.
www.vishay.com
2
Document Number 85756
Rev. 1.2, 15-Jul-03
1N746A to 1N759A
VISHAY
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
Document Number 85756
Rev. 1.2, 15-Jul-03
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
1N756A.TR
Zener Diode, 8.2V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-35, GLASS PACKAGE-2
FAIRCHILD
1N756AC
Zener Diode, 8.2V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
1N756ACTA2
Zener Diode, 8.2V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
1N756AD
Zener Diode, 8.2V V(Z), 1%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
1N756AD7
8.2V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, GLASS, DO-35, 2 PIN
VISHAY
1N756AD8
8.2V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, GLASS, DO-35, 2 PIN
VISHAY
1N756ADRL
8.2V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
1N756ADRL2
Zener Diode, 8.2V V(Z), 1%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
1N756ADTA
Zener Diode, 8.2V V(Z), 1%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
MOTOROLA
©2020 ICPDF网 联系我们和版权申明