1.5KE130E3/1 [VISHAY]
Trans Voltage Suppressor Diode, 1500W, 105V V(RWM), Unidirectional, 1 Element, Silicon,;![1.5KE130E3/1](http://pdffile.icpdf.com/pdf2/p00253/img/icpdf/1-5KE62E3-4_1531782_icpdf.jpg)
型号: | 1.5KE130E3/1 |
厂家: | ![]() |
描述: | Trans Voltage Suppressor Diode, 1500W, 105V V(RWM), Unidirectional, 1 Element, Silicon, 局域网 二极管 |
文件: | 总6页 (文件大小:436K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Peak Pulse Power 1500W
Breakdown Voltage 6.8 to 440V
Case Style 1.5KE
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
• 1500W peak pulse power capabililty on 10/1000µs
waveform, repetition rate (duty cycle): 0.05%
1.0 (25.4)
MIN.
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• High temperature soldering guaranteed: 265OC/10 seconds,
0.375” (9.5mm) lead length, 5lbs. (2.3 kg) tension
0.210 (5.3)
0.190 (4.8)
DIA.
• Includes 1N6267 thru 1N6303A
0.375 (9.5)
0.285 (7.2)
Mechanical Data
Case: Molded plastic body over passivated junction
Terminals: Plated axial leads, solderable per MIL-STD-
750, Method 2026
Dimensions in inches
and (millimeters)
Polarity: For unidirectional types the color band denotes
the cathode, which is positive with respect to the anode
under normal TVS operation
1.0 (25.4)
MIN.
0.042 (1.07)
0.038 (0.96)
DIA.
Mounting Position: Any Weight: 0.045oz., 1.2g
Packaging codes/options:
1/1K per Bulk Box, 11K/box
4/1.4K per 13” Reel (52mm Tape), 4.2K/box
Devices for Bidirectional Applications
For bi-directional, use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440
(e.g. 1.5KE6.8C, 1.5KE440CA). Electrical characteristics apply in both directions.
Maximum Ratings and Characteristics(TA = 25°C unless otherwise noted)
Parameter
Symbol
Limit
Minimum 1500
See Next Table
6.5
Unit
W
Peak power dissipation with a 10/1000µs waveform(1)
PPPM
(Fig. 1)
Peak pulse current wih a 10/1000µs waveform(1)
IPPM
A
Steady state power dissipation
PM(AV)
W
at TL = 75OC, lead lengths 0.375” (9.5mm)(2)
Peak forward surge current, 8.3ms
single half sine-wave superimposed on rated load
IFSM
200
A
V
(JEDEC Method) unidirectional only(3)
Maximum instantaneous forward voltage
at 100A for unidirectional only(4)
VF
3.5/5.0
Typical thermal resistance junction-to-lead
Typical thermal resistance junction-to-ambient
Operating junction and storage temperature range
R
20
75
°C/W
°C/W
OC
θJL
R
θJA
TJ, TSTG
–55 to +175
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(4) VF = 3.5V for devices of V(BR) < 220V, and VF = 5.0 Volt max. for devices of V(BR) > 220V
11/7/00
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Electrical Characteristics(TA = 25°C unless otherwise noted)
Breakdown Voltage
Maximum
Reverse
Leakage
Maximum
Maximum
Clamping
Voltage
PPM
V (V)
C
Maximum
Temp.
General
Semiconductor
Part
V
Test
Current
at
Stand-off
Voltage
Peak Pulse
(BR)
JEDEC
Type
Number
(V)(1)
Current
Coefficient
(2)
V
at V
I
at I
of V
(BR)
(% / °C)
WM
(V)
WM
PPM
Number
Min
Max
I (mA)
I
(4) (µA)
(A)
T
D
1N6267
1N6267A
1N6268
1N6268A
1N6269
1N6269A
1N6270
1N6270A
1N6271
1N6271A
1N6272
1N6272A
1N6273
1N6273A
1N6274
1N6274A
1N6275
1N6275A
1N6276
1N6276A
1N6277
1N6277A
1N6278
1N6278A
1N6279
1N6279A
1N6280
1N6280A
1N6281
1N6281A
1N6282
1N6282A
1N6283
1N6283A
1N6284
1N6284A
1N6285
1N6285A
1N6286
1N6286A
1N6287
1N6287A
1N6288
1N6288A
1N6289
1N6289A
1N6290
1N6290A
1N6291
+1.5KE6.8
+1.5KE6.8A
+1.5KE7.5
+1.5KE7.5A
+1.5KE8.2
+1.5KE8.2A
+1.5KE9.1
+1.5KE9.1A
+1.5KE10
+1.5KE10A
+1.5KE11
+1.5KE11A
+1.5KE12
+1.5KE12A
+1.5KE13
+1.5KE13A
+1.5KE15
+1.5KE15A
+1.5KE16
+1.5KE16A
+1.5KE18
+1.5KE18A
+1.5KE20
+1.5KE20A
+1.5KE22
+1.5KE22A
+1.5KE24
+1.5KE24A
+1.5KE27
+1.5KE27A
+1.5KE30
+1.5KE30A
+1.5KE33
+1.5KE33A
+1.5KE36
+1.5KE36A
+1.5KE39
+1.5KE39A
+1.5KE43
+1.5KE43A
+1.5KE47
+1.5KE47A
1.5KE51
6.12
6.45
6.75
7.13
7.38
7.79
8.19
8.65
9.00
9.50
9.90
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18.0
19.0
19.8
20.9
21.6
22.8
24.3
25.7
27.0
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.9
48.5
50.4
53.2
55.8
58.9
61.2
7.48
7.14
8.25
7.88
9.02
8.61
10.0
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
56.1
53.6
61.8
58.8
68.2
65.1
74.8
10
10
10
10
10
5.50
5.80
6.05
6.40
6.63
7.02
7.37
7.78
8.10
8.55
8.92
9.40
9.72
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
43.6
45.4
47.8
50.2
53.0
55.1
1000
1000
500
500
200
200
50
50
10
10
139
143
128
133
120
124
109
112
100
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77.0
89.0
85.0
98.0
0.057
0.057
0.061
0.061
0.065
0.065
0.068
0.068
0.073
0.073
0.075
0.075
0.076
0.078
0.081
0.081
0.084
0.084
0.086
0.086
0.088
0.089
0.090
0.090
0.092
0.092
0.094
0.094
0.096
0.096
0.097
0.097
0.098
0.098
0.099
0.099
0.100
0.100
0.101
0.101
0.101
0.101
0.102
0.102
0.103
0.103
0.104
0.104
0.104
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
103
5.0
5.0
5.0
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
92.6
96.2
86.7
89.8
78.9
82.4
68.2
70.8
63.8
66.7
56.6
59.5
51.5
54.2
47.0
49.0
43.2
45.2
38.4
40.0
34.5
36.2
31.4
32.8
28.8
30.1
26.6
27.8
24.2
25.3
22.1
23.1
20.4
21.4
18.6
19.5
16.9
17.6
15.3
1.5KE51A
1.5KE56
1.5KE56A
1.5KE62
1.5KE62A
1.5KE68
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Electrical Characteristics (Cont’d) (TA = 25°C unless otherwise noted)
Breakdown Voltage
Maximum
Maximum
Maximum
Clamping
Voltage
PPM
V (V)
C
Maximum
Temp.
General
Semiconductor
Part
V
Test
Current
at
Stand-off
Voltage
WM
(V)
Reverse
Leakage
Peak Pulse
(BR)
JEDEC
Type
Number
(V)(1)
Current
Coefficient
(2)
V
at V
I
at I
of V
(BR)
(% / °C)
WM
PPM
Number
Min
Max
I (mA)
I
(4) (µA)
(A)
T
D
1N6291A
1N6292
1N6292A
1N6293
1N6293A
1N6294
1N6294A
1N6295
1N6295A
1N6296
1N6296A
1N6297
1N6297A
1N6298
1N6298A
1N6299
1N6299A
1N6300
1N6300A
1N6301
1N6301A
1N6302
1N6302A
1N6303
1N6303A
1.5KE68A
1.5KE75
1.5KE75A
1.5KE82
1.5KE82A
1.5KE91
64.6
67.5
71.3
73.8
77.9
81.9
86.5
90.0
95.0
99.0
105
108
114
117
124
136
143
144
152
153
162
162
171
180
190
198
209
225
237
270
285
315
333
360
380
396
418
71.4
82.5
78.8
90.2
86.1
100.0
95.5
110
105
121
116
132
126
143
137
165
158
176
168
187
179
198
189
220
210
242
231
275
263
330
315
385
368
440
420
484
462
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
58.1
60.7
64.1
66.4
70.1
73.7
77.8
81.0
85.5
89.2
94.0
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
243
256
284
300
324
342
356
376
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
16.3
13.9
14.6
12.7
13.3
11.5
12.0
10.4
10.9
9.5
9.9
8.7
9.1
8.0
8.4
7.0
7.2
6.5
6.8
6.1
6.4
5.8
6.1
5.2
5.5
4.4
4.6
4.2
4.4
3.5
3.6
3.0
3.1
2.6
2.7
2.4
2.5
92.0
109
104
118
113
131
125
144
137
158
152
173
165
187
179
215
207
230
219
244
234
258
246
287
274
344
328
360
344
430
414
504
482
574
548
631
602
0.104
0.105
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.106
0.106
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
1.5KE91A
1.5KE100
1.5KE100A
1.5KE110
1.5KE 110A
1.5KE120
1.5KE120A
1.5KE130
1.5KE130A
1.5KE150
1.5KE150A
1.5KE160
1.5KE160A
1.5KE170
1.5KE170A
1.5KE180
1.5KE180A
1.5KE200
1.5KE200A*
1.5KE220
1.5KE220A*
1.5KE250
1.5KE250A
1.5KE300
1.5KE300A
1.5KE350
1.5KE350A
1.5KE400
1.5KE400A
1.5KE440
1.5KE440A
Notes: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE CA62.35
(4) For bidirectional types with VR 10 volts and less the ID limit is doubled
* Bidirectional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA, 1.5KE220CA)
+ UL listed for Telecom applications protection, 497B, file number E136766 for both uni-directional and bi-directional devices
Application
• This series of Silicon Transient Suppressors is used in applications where large voltage transients can permanently damage voltage-sensitive components.
• The TVS diode can be used in applications where induced lightning on rural or remote transmission lines presents a hazard to electronic circuitry
(ref: R.E.A. specification P.E. 60).
• This Transient Voltage Suppressor diode has a pulse power rating of 1500 watts for one millisecond. The response time of TVS diode clamping action is
effectively instantaneous (1 x 10-9 seconds bidirectional); therefore, they can protect integrated circuits, MOS devices, hybrids, and other voltage sensitive
semiconductors and components. TVS diodes can also be used in series or parallel to increase the peak power ratings.
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Ratings and
Characteristic Curves (TA = 25°C unless otherwise noted)
Fig. 1 – Peak Pulse Power Rating Curve
Fig. 2 – Pulse Derating Curve
100
100
75
Non-repetitive Pulse
Waveform shown in Fig. 3
T
A
= 25¡C
10
1.0
0.1
50
25
0
0.1 s 1.0 s
10 s
100 s
1.0ms 10ms
0
25 50 75 100 125 150 175 200
T — Ambient Temperature (¡C)
A
td — Pulse Width (sec.)
Fig. 3 – Pulse Waveform
Fig. 4 - Typical Junction Capacitance
150
100
10,000
1,000
TJ = 25¡C
Unidirectional
Bidirectional
Pulse Width (td) is defined
tr = 10µsec.
as the point where the
peak current decays to
50% of IPP
Peak Value
IPPM
V
R
= 0
Half Value — IPPM
2
V
= Rated
R
50
0
100
10
10/1000µsec. Waveform
as defined by R.E.A.
Stand-off Voltage
f = 1 MHz
Vsig = 50mVp-p
T = 25¡C
td
J
5
10
100
, Breakdown Voltage (V)
500
0
1.0
2.0
t — Time (ms)
3.0
4.0
V
(BR)
Fig. 6 - Maximum Non-repetitive Peak Forward
Surge Current Unidirectional Only
Fig. 5 – Steady State Power
Derating Curve
200
8.0
7.0
6.0
5.0
4.0
3.0
2.0
8.3ms Single Half Sine-Wave
60 Hz
Resistive or
Inductive Load
(JEDEC Method) T = T max.
J
J
100
L = 0.375" (9.5mm)
Lead Lengths
1.6 x 1.6 x .040"
(40 x 40 x 1mm)
Copper Heat Sinks
1.0
0
10
0
25 50 75 100 125 150 175 200
1
10
Number of Cycles at 60 Hz
100
T — Lead Temperature (¡C)
L
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Ratings and
Characteristic Curves (TA = 25°C unless otherwise noted)
Fig. 7 – Incremental Clamping Voltage
Fig. 8 – Incremental Clamping Voltage
Curve (Unidirectional)
Curve (Unidirectional)
100
100
Waveform:
Waveform:
8 x 20 Impulse
1.5KE200
1.5KE130
10 x 100 Impulse
∆V = V - V
C C (BR)
1.5KE200
1.5KE130
∆V = V - V
C
C
(BR)
20
10
20
10
1.5KE75
1.5KE100
1.5KE75
1.5KE39
1.5KE39
2.0
1.0
2.0
1.0
1.5KE33
1.5KE6.8
1.5KE33
1.5KE6.8
1.5KE9.1
1.5KE9.1
1.5KE18
1.5KE12
0.2
0.1
0.2
0.1
0.5
1
2.0
10
50
0.5
1
2.0
10
20
50
I , Peak Pulse Current (A)
PP
I , Peak Pulse Current (A)
PP
Fig. 7 – Incremental Clamping Voltage
Fig. 10 – Incremental Clamping Voltage
Curve (Bidirectional)
Curve (Bidirectional)
100
100
Waveform:
Waveform:
8 x 20 Impulse
10 x 100 Impulse
∆V = V - V
∆V = V - V
C
C
(BR)
C
C
(BR)
1.5KE200C
1.5KE200C
1.5KE75C
20
10
20
10
1.5KE75C
1.5KE39C
1.5KE30C
1.5KE15C
1.5KE39C
1.5KE30C
2.0
1.0
2.0
1.0
1.5KE11C
1.5KE7.5C
1.5KE15C
11C
1.5KE7.5C
0.2
0.1
0.2
0.1
0.5
1
2.0
10
20
50
0.5
1
2.0
10
20
50
I , Peak Pulse Current (A)
PP
I , Peak Pulse Current (A)
PP
1.5KE6.8 thru 1.5KE440CA
and 1N6267 thru 1N6303A
TRANSZORB® Transient Voltage Suppressors
Ratings and
Characteristic Curves (TA = 25°C unless otherwise noted)
Fig. 11 – Instantaneous Forward Voltage
Fig. 12 – Breakdown Voltage Temperature
Characteristics Curve
Coefficient Curve
100
10
1
1,000
Unidirectional
100
10
1
Bidirectional
Pulse width = 300µs
1% Duty Cycle
T
= 25°C
J
0.1
0
0.4
0.8
1.2
1.6
2.0
10
20
50
100
200
500
5
Instantaneous Forward Current (A)
V(BR), Breakdown Voltage (V)
Fig. 13 – Typical Transient
Thermal Impedance
100
10
1
0.1
0.001
0.01
0.1
1
10
100
1000
tp – Pulse Duration (sec)
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_2_files/SI913_2_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_2_files/SI913_2_2.jpg)
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_2.jpg)
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_2.jpg)
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_3_files/SI913_3_2.jpg)
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_4_files/SI913_4_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_4_files/SI913_4_2.jpg)
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_2.jpg)
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_2.jpg)
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_5_files/SI913_5_2.jpg)
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_2.jpg)
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_2.jpg)
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI913_6_files/SI913_6_2.jpg)
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI912_7_files/SI912_7_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00001/img/page/SI912_7_files/SI912_7_2.jpg)
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明